• 공학교육연구
• /
• 제10권2호
• /
• pp.106-117
• /
• 2007

Recently there has arisen an increasing world-wide emphasis on teaching ethics within the engineering curriculum. Much of the teaching has relied on the use of an American model emphasizing autonomy and professional identification. This paper argues that this model is inadequate when engineering is seen in a global perspective, because different cultural values are dominant throughout the world, some of which stand in sharp contrast to traditional Western values based on the primacy of the individual. A new global engineering ethics thus needs to be constructed which takes into account a variety of different cultural values and local circumstances, but which is able to serve as a uniting ethical foundation for engineers throughout the world. The paper suggests that the development of a global code of engineering ethics would be a fruitful way to pursue such a strategy.

• 한국도서관정보학회지
• /
• 제25권
• /
• pp.295-338
• /
• 1996

The findings from this study are summarized as follows : 1. It is questionable to define the term "Hanja" as "the Chinese Character used independently or used along with Hangul. 2. It is found to be a problem that the validity and objectivity in the selection of Hanja are lacking. 3. It is also a problem that there is neither principles nor consistency in styling of characters. 4. The system of arrangement has problems, too. The adoption of arrangement of Hanja by its Korean pronunciation results in lots of errors and mistakes. Besides, mistaken strokes and radicals produced considerable errors in the arrangement of Hanja. 5. The omission of the abbreviated Hanja in the Code can be considered to neglect the current trend of increased use of them. 6. The issue concerned with the Japanese-origin Hanja is that several number of Hanja deemed unnecessary are included.y are included.

• Nuclear Engineering and Technology
• /
• 제28권6호
• /
• pp.542-550
• /
• 1996

Nuclear ship reactors have several features different from land-based PWR's. Especially, effects of ship motions on reactor thermal-hydraulics and good load following capability for abrupt load changes are essential characteristics of nuclear ship reactors. This study modified the RETRAN-03 to analyze the thermal-hydraulic transients under three-dimensional ship motions, named RETRAN-03/MOV in order to apply to future marine reactors. First Japanese nuclear ship MUTSU reactor have been analyzed under various ship motions to verify this code. Calculations have been peformed under rolling, heaving and stationary inclination conditions during normal operation. Also, the natural circulation has been analyzed, which can provide the decay heat removal to ensure the passive safety of marine reactors. As results, typical thermal-hydraulic characteristics of marine reactors such as flow rate oscillations and S/G water level oscillations have been successfully simulated at various conditions.

• 한국지진공학회논문집
• /
• 제23권3호
• /
• pp.191-199
• /
• 2019

To calculate proper seismic design load and seismic design category, the exact site class for construction site is required. At present, the average shear-wave velocity for multi-layer soil deposits is calculated by the sum of shear-wave velocities without considering of vertical relationship of the strata. In this study, the transfer function for the multi-layered soil deposits was reviewed on the basis of the wave propagation theory. Also, the transfer function was accurately verified by the finite element model and the eigenvalue analysis. Three methods for site period estimation were evaluated. The sum of shear-wave velocities underestimated the average shear-wave velocities of 526 strata with large deviations. The equation of Mexican code overestimated the average shear-wave velocities. The equation of Japanese code well estimated the average shear-wave velocities with small deviation.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.917-920
• /
• 2006

This paper reports a comparative study for performance evaluation guidelines for bridge bearings. Guidelines for bridge bearings such as KS, EN1337, AASHTO LRFD, and Japanese code were analyzed. In addition, fatigue tests of elastomeric bearing are being conducted for allowable shear deformation and compressive stress. Based on literature survey and tests, the innovative concept of performance evaluation guidelines for bridge bearings is suggested.

• Annals of Occupational and Environmental Medicine
• /
• 제35권
• /
• pp.3.1-3.11
• /
• 2023

Background: Studies on the risk of mercury (Hg) in Korean fishery products focus primarily on total Hg levels as opposed to methylmercury (MeHg) levels. None of the few studies on MeHg in tuna investigated tuna from Japanese restaurants. Few have evaluated lead (Pb), cadmium (Cd) and arsenic (As) in tuna. Thus, this study aimed to conduct a risk assessment by evaluating heavy metal concentrations in tuna from Japanese restaurants. Methods: Thirty-one tuna samples were collected from Japanese restaurants in the Republic of Korea. They were classified according to region and species. The concentration of heavy metals in the samples was analyzed using the Ministry of Food and Drug Safety Food Code method. The rate of exceedance of maximum residue levels (MRLs) and the risk compared to the provisional tolerable weekly intake (PTWI) set by the Joint Food and Agriculture Organization/World Health Organization Expert Committee on Food Additives (%PTWI) were evaluated for risk assessment. Results: The mean of MeHg, Pb, Cd and As concentrations were 0.56 ± 1.47 mg/kg, 33.95 ± 3.74 ㎍/kg, 14.25 ± 2.19 ㎍/kg and 1.46 ± 1.89 mg/kg, respectively. No sample exceeded the MRLs of Pb and Cd, but 9.7% of the samples exceeded the MRL of MeHg. The %PTWIs of MeHg, Pb, Cd and As were 4.2037, 0.0162, 0.0244 and 1.1627, respectively. The %PTWI of MeHg by age group and sex was highest among men aged 19-29 years (10.6494), followed by men aged 30-49 years (7.2458) and women aged 19-29 years (4.8307). Conclusions: We found that 3 out of 31 samples exceeded the MRL of MeHg. The %PTWI of MeHg showed significant differences based on age and sex, and the value was likely to exceed a safe level depending on individuals' eating behaviors. Therefore, improved risk management for MeHg is required.

• Structural Engineering and Mechanics
• /
• 제46권6호
• /
• pp.791-808
• /
• 2013

The main purpose of this paper is to develop seismic fragility curves for existing reinforced concrete, RC, buildings based on the post earthquake field survey and the seismic performance using capacity design. Existing RC buildings constitute approximately 65% of the total stock in Algiers. This type of buildings, RC, was widely used in the past and chosen as the structural type for the future construction program of more than 2 millions apartments all over Algeria. These buildings, suffered moderate to extensive damage after the 2003 Boumerdes earthquake, on May 21st. The determination of analytical seismic fragility curves for low-rise and mid-rise existing RC buildings was carried out based on the consistent and complete post earthquake survey after that event. The information on the damaged existing RC buildings was investigated and evaluated by experts. Thirty four (34) communes (districts) of fifty seven (57), the most populated and affected by earthquake damage were considered in this study. Utilizing the field observed damage data and the Japanese Seismic Index Methodology, based on the capacity design method. Seismic fragility curves were developed for those buildings with a large number data in order to get a statistically significant sample size. According to the construction period and the code design, four types of existing RC buildings were considered. Buildings designed with pre-code (very poor structural behavior before 1955), Buildings designed with low code (poor structural behavior, between 1955-1981), buildings designed with medium code (moderate structural behavior, between 1981-1999) and buildings designed with high code (good structural behavior, after 1999).

• 한국공간구조학회논문집
• /
• 제7권5호
• /
• pp.57-65
• /
• 2007

철골조 고층건물을 대상으로 풍응답계측을 실시하여, 감쇠율과 고유진동수의 진폭의존성을 검토하였다. 진폭의존성의 검토를 위하여 RD법을 사용하였다. RD법에 의한 진동특성을 하프파워법에 의한 진동특성과 비교하여 두 방법 사이의 상관관계를 분석하였다. 또한 일본, 캐나다기준에 의한 강풍시의 사용성평가를 통하여 두 가지 방법의 적용성을 검토하였다. RD법에 의하여 감쇠율의 진폭의존성을 확인하였으며, 고유진동수의 진폭의존성은 공학적인 의미에서 상대적으로 매우 작은 것을 확인하였다. 또한 계측건물은 사용성을 만족하였으며, 일본기준이 캐나다기준보다 더욱 엄격함을 확인하였다.

• 한국항해학회지
• /
• 제24권3호
• /
• pp.157-165
• /
• 2000

When the GPS system was come to the operation, the U.S Coast Guard initiated development of differential GPS system based on a marine radiobeacon. It has rapidly been spread out to many countries. DGPS equals to P(Y) code in a positioning accuracy. USA has recently determined to expand the coverage of DGPS to inland in order to install a nationwide DGPS chain. Korea is under processing for improving the DGPS as a nationwide positioning system. Before expanding the service area inside Korea, we need to verify the relation between the field strength and DGPS accuracy for the service area. The Japanese DGPS data is received in the southern Part of the Korean peninsula. The Korean DGPS was not a complete system, so we selected the Japanese DGPS data as a model for the study. This paper investigate accuracy and reliability characteristics of RBN/DGPS over the effective service area. Through the experimental and simulation study, we obtained the reliable and stable positioning accuracy in the southern part of the Korean peninsula. In addition, the characteristics of RBN/DGPS were examined in the land over the effective coverage from Japan. The results would be a basic reference to research the RBN/NDGPS in Korea.

• 수산해양기술연구
• /
• 제52권4호
• /
• pp.364-371
• /
• 2016

The analysis on the international safety management code (ISM Code) and case of foreign national safety management for fishing vessel was conducted to serve as a basic data on the introduction of safety management system (SMS) for a deep-sea fishing vessel in Korea. As a result, Maritime New Zealand (MNZ) has managed operations of SMS in the maritime rules according to the Maritime Transport Act since 1994. MNZ underwent a safe ship management (SSM), which includes elements applied to shipping companies, ship and verification of the ISM Code for ships, except ISM Code application since 1998. In 2014 the introduction of the advanced maritime operator safety system (MOSS) superior to the SSM by MNZ was promoted actively switch and enforcement. Meanwhile, the safe operation manual of Japanese fishing vessel includes large part of the contents of the ISM Code, and voluntary implementation to fit the realities of the fishing vessel. The law application of SMS for a deep-sea fishing vessel after the newly establishment of the Ocean Industry Development Act to SMS would be advantageous to the schematic management, supervision, maintenance and application and, in 2016 from the implementation of maritime safety supervisor for a deep-sea fishing vessel that the management and supervision through the fishing vessel will be the efficient operation. The configuration of the safety management system in a deep-sea fishing vessel should be included as an element of ISM Code. The introduction of such a system is gradually applicable, such as nationality overseas vessel case study of the ISM Code, and vessels that are excluded from the application will be implemented as autonomous as Japan. The results are expected to contribute to sustainable development in the ocean industry safety culture spread throughout the ocean industry through the enhancement of safety fishing competency and safety management responsibility of fisher.