• Journal of the Korea Society for Simulation
• /
• v.28 no.2
• /
• pp.139-147
• /
• 2019

A MANPADS(Man Portable Air Defense System), which tracks infrared energy, is light enough for individuals to carry and can against to a variety of aircraft, making it widely deployed around the world, posing a major threat to aircraft. A flare has been developed as an IRCM(Infrared Countermeasures) that protects the life of friendly aircraft and combatants by deceiving such guided missiles. However, DIRCM, which can overcome the problems of existing IRCM, is being developed mainly in some developed countries, and the need for it has been increasing gradually. This paper modeled first generation IR seeker of AM modulation method, the second generation IR seeker of FM modulation method, and the third generation IR seeker of pulse modulation method among various MANPADS, and modeled the scattering light phenomenon in the seeker when laser beams are investigated in DIRCM. Using this, jamming simulations were performed in various engagement environments of the MANPADS and aircraft equipped with DIRCM, and the miss distance of the guided missiles and aircraft were analyzed. Simulation results show that DIRCM, which irradiates a modulated laser beam with one jamming code, deceives both first, second and third generation MANPADS at 1km and 2km of engagement distance. In particular, the survival rate of aircraft equipped with DIRCM increased when the distance of engagement increased from 1km to 2km, and the survival rate was at least 99% at 2km of engagement distance.

• Proceedings of the Korean Fiber Society Conference
• /
• 2001.10a
• /
• pp.51-54
• /
• 2001

Mercerization은 대부분의 면제품에 널리 적용되고 있는 가공방법이나 일반적으로 이루어지고 있는 상온에서의 NaOH에 의한 mercerization은 용액의 표면장력과 점도 때문에 알칼리가 섬유내부까지 깊숙이 침투하지 못하고 이로 인해 섬유의 표면에만 Mercerization이 진행되어 태가 뻣뻣해지는 단점이 있다. 이러한 jamming effect에 의한 표면(skin)과 내부(core)간의 머서화차이를 제거하기 위하여 고온 머서화가공에 대한 연구가 진행된 바 있으나 에너지의 과다소비라는 측면에서 상업화되기에는 문제가 있는 실정이다. (중략)

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.1
• /
• pp.23-31
• /
• 1993

This paper aims to analyse the performance of coded frequency hopping /spread spectrum mul~ tiple access system by employing the channel with mixture of A WGN, partial band jamming, fading and user interference. In this approach, a special consideration is focused on the effect of the partial hit. That is, the interfering signals that are present for a small fraction of the hop dur~ ation did not cause hit. The results of analysis showed that the frequency hit changed linearly according to the varying degree of frequency overlap. And this effect did not change the type of error probability distri~ bution.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.25 no.1
• /
• pp.65-71
• /
• 2022

In this paper, we propose an opportunistic data relay scheme in narrowband multihop combat radio networks. Narrowband networks have physical restrictions on high-speed transmission. Furthermore, the topology changes dynamically due to the jamming of the enemy, signal interference between friendly forces, and movement of network entities. Therefore, the traditional relay scheme that collects topology information and calculates a relay path before transmission is unsuitable for such networks. Our proposed scheme does not collect topology information and transmits data opportunistically. The scheme can cause unnecessary data relaying that is not related to data delivery to the destination node. However, for small networks, the effect of increasing network throughput by not gathering topology information is much greater than the effect of reducing throughput by unnecessary data relays. We demonstrate the performance superiority of the proposed scheme through simulation in the worst case of network topology.

• 한국정보통신설비학회:학술대회논문집
• /
• 2005.08a
• /
• pp.141-145
• /
• 2005

In this paper, UWB system did research about effect that interference effect with neighborhood single equipment or nearby group equipment gets In DMB service. 2.6425GHz satellite digital multimedia broadcasting service(SDMB) that electric wave interference special quality is contiguity frequency-band including interference of signal by unnecessary radiation level that is radiated in UWB system, and 3.4125GHz broadcasting relay net that is In-band frequency-band and interference effect degree that get in service did comparative analysis. SDMB system was BER $1{\times}10^{-4}$ that interference effect happens from 6.5m point and broadcasting signal reception is possible at 4m point. Also, it was BER $1{\times}10^{-4}$ that interference effect begins to happen from 5.0m point about center frequency 3.4126GHz and broadcasting signal reception is possible at 2m point. And, confirmed that UWB system of impulse method is less interference effect about 2 dB than UWB system of OFDM method, to electric wave of UWB system that is small output

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.4 s.119
• /
• pp.455-463
• /
• 2007

In this paper, it is proposed how to implement the object detection system which is able to apply to vehicular applications, unmanned facilities, automatic door and others with microwave. As the technology which detects an object with microwave is becoming more popular, it seems impossible to avoid mutual interference and jamming caused by limited frequency bandwidth. The system in this paper detects an object by correlating the code of TX and RX signals with the pseudo-random code having best quality in interference and jamming environment. In order to generate simulant doppler signal for detecting the distance of an fixed object where there is no doppler effect, the phase of TX signal is shifted continually. Also, the saturation of receiver was removed and the error of distance measurement was decreased by controlling the power of TX signal for getting constant RX signal. The proposed system detects a object which ranges from 0.5 m to 2.0 m and informs vocally whether there is the object within 1.0 m or not.

• Journal of Advanced Navigation Technology
• /
• v.21 no.3
• /
• pp.258-263
• /
• 2017

This paper analyzed GNSS signal acquisition performance of a regional navigation receiver when an interference cancellation capability is applied. Intereference between the regional navigation and GNSS signal can be mitigated by the interference cancellation technique such as the successive interference cancellation (SIC) algorithm. However signal acquisition performance will be degraded when jamming-to-signal ratio (J/S) is large due to a cross-correlation properties of residual signals. In this paper we analyzed signal acquisition performance degradation due to the interference between the Kasami and GNSS Gold code signal. Monte Carlo simulation is used for the analysis and compared results with those of GNSS Gold code only condition.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.380-383
• /
• 2006

The media transport system is used in a printer, a ATM(Automated Tellor Machine), and so on. The media transport system has many problems through miniaturization and rapid transportation of these machines. In the paper feeding mechanism, it is important to feed the sheet without jamming under any conditions. To avoid sheet jamming, first we need to predict the behavior of the sheet exactly. In this paper, the analysis of media behavior is based on J. Stolte's studies. In all of OA machines, a flexible beam or plate is pushed from the channel. The motion may be constrained by guides. This leads to a transient and geometrically nonlinear problem. The behavior of paper is simulated by dynamic elastica theory. The shape of guide is represented by parametric cubic curve. But J. Stolte's studies did not considered contact condition between sheet and guide. So Klarbring's Model. will be applied. And the analysis of flexible media has to include aerodynamic effect for more exact behavior analysis, because the flexible media can be deformed drastically by a little force. Therefore aerodynamic force must be applied to the governing equation. Lastly, the simulation of this model is performed, and the experiment is performed for verification of this model. The experimental results of low exit velocity are consistent with the simulation results, however experimental results of high exit velocity do not agree well with analytical results. The reason is that there may be other effects like nip Phenomena

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.1
• /
• pp.543-546
• /
• 2005

In this paper, it was estimated the BER performance of the individual system type by applying the SFH type and the FFH type to the FH MC-DS CDMA system that combined the strong points of MC DS/CDMA and that of Frequency Hopping under the Nakagami fading channel with Multi-tone Jamming. An increase in the number of hoppings means that it can improve the BER performance by reducing the receiving burden of the FH MC DS/CDMA by achieving a frequency diversity effect. Therefore, I verified that the performances of the FH MC DS/CDMA system could be improved by increasing the number of hoppings.

• Journal of the Korean Society for Precision Engineering
• /
• v.2 no.3
• /
• pp.28-40
• /
• 1985

In this study, to check up on the effect of the components of cutting resistance upon friction between drill and inside wall of hole in drilling, the experiment was performed with individual specimen of carbon steel, cast iron, aluminium alloy under various cutting conditions: depth of hole, cutting speed, feed rate, shape and material of specimen. On the basis of the experimental results, the following conclusions are drawn; 1. The components of cutting resis- tance were increased in proportion to the increase of depth of hole owing to frictional resistance of drill margin and chip-jamming. 2. As feed rates increase, torque and thrust were increased. When comparing to the increasing rate for these components respecitively, thrust is higher tendency than torque. 3. As drill diameter increase, torque and thrust were increased. When comparing to the increasing rate for these components respectively, torque is higher tendency than thrust. 4. In the case of torque, the frictional resistance between drill margin and inside wall of drilled hole accounts for about 20 percent of carbon steel, 14 of cast iron, 10 aluminium alloy in drilling. But the effect of thrust force could be negligible. 5. Comparison between the theoretical and experimental results showed a close agreement so far as depth of hole is about three times of drill diameter. But there was a wide difference between them beyond the rane of three times, because of characteristics of the drilling process.