• Journal of Positioning, Navigation, and Timing
• /
• v.3 no.2
• /
• pp.45-51
• /
• 2014

GNSS has the disadvantage of being vulnerable to jamming, and thus, the necessity of jamming countermeasure techniques has gradually increased. Jamming countermeasure techniques can be divided into an anti-jamming technique and a jammer localization technique. Depending on the type of a jammer, applicable techniques and performance vary significantly. Using an appropriate jamming countermeasure technique, the effect of jamming on a GNSS receiver can be attenuated, and prompt action is enabled when estimating the location of a jammer. However, if an inappropriate jamming countermeasure technique is used, a GNSS receiver may not operate in the worst case. Therefore, jammer identification is a technique that is essential for proper action. In this study, a technique that identifies a jammer based on template matching was proposed. For template matching, analysis of a received jamming signal is required; and the signal analysis was performed using a spectral correlation function. Based on a simulation, it was shown that the proposed identification of jamming signals was possible at various JNR.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.23 no.3
• /
• pp.221-228
• /
• 2020

This paper presents the radar counter jamming algorithm and ground far-field test results for the pull-off deceptive jamming signals like RGPO(Range Gate Pull Off) and VGPO(Velocity Gate Pull Off). We designed the radar counter jamming algorithm according to the characteristics of the deceptive jamming signals. This algorithm is validated by simulation before ground far-field test. The existing X-band AESA radar demonstrator was used to test the proposed algorithm. The proposed algorithm was applied to the radar processor software. The deceptive jamming signals generated using the commercial jamming signal generator. We performed the repeated ground far-field test with the test scenario. Test results show that the proposed counter deceptive jamming algorithm works in the real radar system.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.9
• /
• pp.3444-3457
• /
• 2021

In the field of anti-jamming based on dynamic spectrum, most methods try to improve the ability to avoid jamming and seldom consider whether the jammer would perceive the user's signal. Although these existing methods work in some anti-jamming scenarios, their long-term performance may be depressed when intelligent jammers can learn user's waveform or decision information from user's historical activities. Hence, we proposed a hidden anti-jamming method to address this problem by reducing the jammer's sense probability. In the proposed method, the action correlation between the user and the jammer is used to evaluate the hiding effect of the user's actions. And a deep reinforcement learning framework, including specific action correlation calculation and iteration learning algorithm, is designed to maximize the hiding and communication performance of the user synchronously. The simulation result shows that the algorithm proposed reduces the jammer's sense probability significantly and improves the user's anti-jamming performance slightly compared to the existing algorithms based on jamming avoidance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.10
• /
• pp.868-878
• /
• 1990

Upon introducing satellite communication system to Korea, one of the important problems to cope with is the effect from the probable intentional interference I.e. jamming. In this paper we have investigated how much the performance of ordinary PSK signal and Directed Sequence Spread Spectrum PSK signal degrade by the effect of jamming in the satellite communication system. In analysis we have consider the M ary PSK signal and the liniter type nonlinear satellite transponder in an environment of uplink tone or noise jamming plus Gaussian noise and downlink Gaussian noise. Using the derived error rate equation we have evaluated the error performance of BPSK and QPSK systems and compared this with that of DS BPSK system. Form the results, we know that the nonlinear satellite system is degraded more severely by the effect of noise jamming than tone jamming and the effect of tone jamming on the error rate performance can be reduced more remarkably by increasing the process gain in DS BPSK system rather than increasing carrier to jamming noise power ratio in conventional BPSK system.

• Journal of Positioning, Navigation, and Timing
• /
• v.9 no.2
• /
• pp.51-57
• /
• 2020

For the purpose of development of anti-jamming GPS receiver we have developed an anti-jamming algorithm and its Simulink implementation model. The algorithm used here is a form of Space-Time Adaptive Processing (STAP) filter which is well known as an effective way to remove wideband jamming signals. We have chosen Minimum Variance Distortionless Response (MVDR) block-adaptive beamforming algorithm for our development since it can provide relatively fast convergence speed to reach optimal weights, stable and high suppression capability on various types of jamming signals. We will show modeling results for this MVDR type adaptive beamformer and some simulation results. We also show the integrity of the demodulated satellite signals and the accuracy of resulting navigation solutions after anti-jamming operation.

• Journal of Communications and Networks
• /
• v.17 no.5
• /
• pp.482-490
• /
• 2015

This article exploits spatial diversity for jamming to prevent wiretapping in the extreme case in which an eavesdropper is located near the source and a common jamming signal is unavailable. To address this challenge, the jamming signal is allowed to carry a random binary message. Then, it is proposed that the active intermediate node transmits this jamming signal and the decoding of this signal at both source and destination is physically secured as result of using the physical-layer security method. If the source and the destination securely and correctly decode this jamming message, the source transmits another message which is created from combining its information message and the decoded message using the network-coding method. Therefore, this method prevents the transmissions from being eavesdropped upon by the source-wiretapping.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.5
• /
• pp.910-916
• /
• 2010

A modern artillery use a FMCW Proximity Fuze for effectively target destruction. FMCW Proximity Fuze can be deceived by Jamming Technique because it uses RF for distance estimation. FMCW Proximity Fuze algorithm is similar to FMCW radar's, but normal Jamming Tech. like Noise and Mulitone is useless. Most Shots with FMCW Proximity Fuze have a additional mechanical fuze against RF Jamming. Shots explode by mechanical fuze when Proximity Fuse is Jammed. However, distance Deception is available because shots can not distinguish between deception jamming signal and ground reflected signal. For making Distance Deception Jamming, FMCW signal tracking is demanded. In this paper, we propose a FMCW tracking method and develop the Jammer to show Jamming signal.

• Journal of Positioning, Navigation, and Timing
• /
• v.8 no.2
• /
• pp.41-47
• /
• 2019

Recently, number of intentional jamming has increased significantly. If GNSS jammers are activated, user receivers can be largely influenced due to the vulnerable characteristic of the GNSS (Global Navigation Satellite System) signal. When the reception power of the jamming signal and that of the navigation signal are similar, the C/A (Coarse Acquisition) chip delay error can occur in the delay locked loop. To evaluate the jamming effect, a new measurement model is formulated based on previous research works. The new model explains how the jamming to signal ratio affects the ranging measurement accuracy and other parameters. To evaluate the validity of the newly formulated model, the experiment results of the previous research works under actual jamming environment are utilized. By evaluating the consistency of the carrier-to-noise ratio (C/N0) and the position error with the actual jamming environment, the validity of the newly formulated model is verified.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.9A
• /
• pp.1609-1613
• /
• 2001

본 논문에서는 실시간 자기 상관 관계를 이용하여 주파수 도약 시점을 찾아내는 epoch 추정기를 소개하고 이것의 성능을 tone jamming 환경 하에서 분석해 보았다. 주파수 도약 방법을 이용하는 시스템은 주로 군 관련 시스템이므로 jamming 환경 하에서의 성능이 매우 중요하다. Jamming이 있을 경우 epoch 추정기는 실제 값보다 작은 값을 나타내는 것을 알 수 있었다. 분석 과정을 수학적으로 유도하였고, 컴퓨터 실험으로 결과를 확인하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.9
• /
• pp.827-832
• /
• 2011

Communication is very important in warfare. Dispatch riders were used in ancient warfare, but communication system is used in modern warfare, as the advancement of communication equipments. In order to weaken enemy military strength, communication jamming signal disrupts enemy communication systems. Tone jamming is one of the common communication jamming techniques. Tone jamming is that several tones are placed in the spectrum for neutralizing the enemy's radio communication receivers. In this paper, we develop multitone jamming signal controlled tone number up to 10 tones and tone interval between tones using DDS(Direct Digital Synthesizer) core and FPGA(Field Programmable Gate Arry) of Xilinx Inc. and show the jamming signal output.