• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 춘계학술대회 논문집
• /
• pp.415-418
• /
• 1998

The maleate copolyrner($C_{18}MA-VE_2$) is used as sensitive materials and deposited on the slide-glass substrates at room temperature using Langmuir-Blodgett(LB) method. The results of current-time(1-t) measurements are performed to investigate the gas-detection characteristics of the sensitive LB films in the presence of organic gases just as chloroform, acetone, ethanol, methanol using the apparatus for the gas-detection measurement. Several interesting responses are observed at room temperature, such as reversible response, sensitivity and response time. Response time and sensitivities are evaluated 160~220[sec], minimum 6[times], maximum 70[times] for each organic gas by adsorption and penetration of the organic gases in the relation concentration of 100[%], respectively.

• 공학교육연구
• /
• 제27권2호
• /
• pp.25-34
• /
• 2024

Due to the Covid-19 pandemic, it seems to have been impossible to run offline training courses. To overcome this situation, online training courses has been emerged. Just moving the educational environment from offline to online instead of re-designing the curriculum, however, is not effective for trainees. To maximize educational effectiveness, it is necessary to re-design the curriculum based on constructivist appoach which gives trainees experience on skills and knowledge about their job. As for re-designing the curriculum into real-time online practical learning based on constructivism, learning satisfaction and work efficacy of trainees may have been increased. From these results, HRD professionals in an IT company should need to consider how to structure the curriculum when they design the real-time online practical learnings.

• 한국초지조사료학회지
• /
• 제11권3호
• /
• pp.182-188
• /
• 1991

With a purpose of finding out the effects of cattle slurry applicatioin on the dry matter yield, yield component, and botanical composition in the mixed sward, a field experiment was conducted with two times and five levels of cattle slurry application. The experimental field was laid.out in a split-plot design with three replications, and lasted from September. 1986 to October, 1990 at the Livestock Experiment Station in Suweon, The results obtained are summarized as follows: 1. At each harvest time, the plant growth of the plots with cattle slurry application was slightly worse when compared to dressing of mineral fertilizer. 2. Average dry matter yield for 4 years was not significantly different between the slurry application times, just after cutting, and 15 days after cutting, The DM yield in the plot with cattle slurry 30 m!/ha and mineral fertilizer(9,095 kg/ha) and with cattle slurry 60 m1/ha and mineral fertilizer(8, 987 kg/ha) were decreased by 8% and 10% than that of the plot with mineral fertilizer application(9,937 kg/ha), respectively. 3. The DM yield component of the plots with cattle slurry application just after cutting was much better when compared to manuring 15 days after cutting. And it was much better in the plot with cattle slurry 60 m"/ha and mineral fertilizer which was composed of 73.8% grasses(6.636 kg/ha). 24.6% legumes (2,207 kdha) and 1.6% weeds(144 kdha). 4. In general, the botanical composition was relatively good in the plots with slurry application just after cutting. Grassland vegetation of the plots with cattle slurry 60 m"/ha and mineral fertilizer was changed into much better botanical composition with 66.8% grasses, 30.2% legumes and 3. 1% weeds at the end of the experiment.xperiment.

• 대한전자공학회논문지
• /
• 제15권5호
• /
• pp.13-18
• /
• 1978

본 논문에서는 PLL의 pull-in 특성을 개선하기 위하여 delay switching PL난을 제시하였다. phase detector와 low grass filter사이에 간단한 RC delay회로를 삽입하고, 90° shift 시킨 Phase detector출력에 의하여 delay time을 switching하였다. 그 결과 pull-in range는 lock range의 1/2이상으로 넓힐 수 있었으며 pull-in time도 개선되었다. 이 개선된 Pull-in특성은 근사적으로 해석되었으며 실험으로 확인되었다.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2000년도 International Symposium on Magnetics The 2000 Fall Conference
• /
• pp.397-406
• /
• 2000

Hopkinson effect in the HDDR-treated Nd$\sub$15/Fe$\sub$77/B$\sub$8/ alloy was examined in detail by means of a thermomagnetic analysis with low magnetic field (600 Oe). The emergence and magnitude of maximum in magnetisation in the thermomagnetic curve due to the Hopkinson effect was correlated to the grain structure and coercivity of the HDDR-treated material. the HDDR-treated materials showed clear Hopkinson effect (maximum in magnetisation just below the Curie temperature of the Nd$\sub$2/Fe$\sub$14/B phase) on heating in the thermomagnetic curve. Magnitude of the magnetisation rise due to the Hopkinson effect became smaller as the recombination time increased. The magnetisation recovery at room temperature on cooling from above the Curie temperature became smaller as the recombination time increased. The HDDR-treated materials with shorter recombination time, finer grain size and higher coercivity showed larger magnetisation maximum due to Hopkinson effect in the thermomagnetic curve.

• 한국정보통신학회논문지
• /
• 제9권1호
• /
• pp.34-39
• /
• 2005

본 논문에서는 광버스트 무선교환망에서 버스트가 거쳐 온 홉 수에 따른 우선순위 처리기능을 제공하는 대역예약할당방식을 제안하고 향상된 성능을 분석한다. 기존의 대역예약방식은 버스트간 충돌이 발생되면 홉 수를 고려하지 않고, 상대적으로 짧은 옵셋타임을 가지는 버스트를 폐기시킨다. 결과적으로 많은 홉을 경유한 버스트가 폐기된다면 해당 버스트가 경유한 스위치들에 예약된 대역들이 모두 낭비되기 때문에 적은 홉을 경유한 버스트가 폐기되는 경우보다 망의 전체적인 효율성이 떨어지는 문제가 발생된다. 이러한 문제를 해결하기 위해서 본 논문에서는 많은 홉 수를 경유한 버스트에 대해 우선순위를 부여하는 Just Enough Time(JET) with hop count 방식을 사용하여 가급적 대역낭비를 감소시킨다. 제안된 방식에 대한 모의실험을 통해서 기존의 대역예약방식과 제안된 JET with hop count 방식의 블로킹확률과 링크효율을 비교 분석하여 제안된 방식의 성능이 우수함을 보였다.

• 한국해양학회지:바다
• /
• 제24권2호
• /
• pp.187-207
• /
• 2019

고성능 해양모델을 개발하기 위하여 적시 컴파일(Just-In-Time) 언어인 줄리아 언어를 사용하였고, 운동량 방정식의 해를 구하기 위해 연속완화법으로 푸아송 방정식을 푸는 코드를 작성하였다. 다음으로, 줄리아 계산 코드를 시험하기 위하여 두 가지의 모델을 구축하였다. 첫 번째로, 일정한 유량의 생성/소멸(source/sink) 조건을 시험하기 위해 단순한 수로 형태를 모델링하였고, 두 번째로, 조석 외력(tidal forcing) 및 전향력(Coriolis force), 난류확산계수로 인한 효과 등을 시험하기 위해 황해(Yellow Sea)를 단순화하여 모델링하였다. 모델은 두 가지 시나리오 안에서 총 8개의 실험안으로 테스트되었다. 테스트 결과, 시나리오 1에서 3가지 실험안의 수심 평균된 유속은 이론 값에 완벽하게 수렴하였고, 해저마찰로 인한 수직적 유속 구배를 잘 보여주었다. 또한 시나리오 2에서는 황해의 무조점과 우리나라 서해 중부와 남부 연안의 조석 특성을 잘 재현하였고, 전향력과 수직 난류확산계수에 따른 결과의 차이를 잘 보여주었다. 따라서, 줄리아 언어를 이용한 해양모델을 개발하는 데에 성공하였다고 판단되며, 이는 해양모델이 고전적인 컴파일 언어에서 적시 컴파일 언어로 성공적으로 넘어가는 단계에 오게 됐다는 것을 시사한다.

• 한국경영과학회지
• /
• 제23권2호
• /
• pp.83-101
• /
• 1998

Assembly U-lines are increasingly accepted in industry, especially just-in-time production systems, for the efficient utilization of workforce. In this paper, we present an integer programming formulation and a branch-and-bound method for balancing the U-line with the objective of minimizing the number of workstations with a fixed cycle time. In the mathematical model, we provide the method that can reduce the number of variables and constraints. The proposed branch-and-bound method searches the optimal solution based on a depth-first-search. To efficiently search for the optimal solutions to the problems, an assignment rule is used in the method. Bounding strategies and dominance rules are also utilized. Some problems require a large amount of computation time to find the optimal solutions. For this reason. some heuristic fathoming rules are also proposed. Extensive experiments with test-bed problems in the literature are carried out to show the performance of the proposed method. The computational results show that our method is promising in solution quality.

• Journal of Welding and Joining
• /
• 제16권1호
• /
• pp.98-105
• /
• 1998

The accuracy of the finite element method depends upon the mesh that is used in the analysis. The temperature around the arc is higher than the melting point of the materials, and it drops sharply in the regions just away from the arc. This requires an extremely fine mesh in the confined high temperature region to predict the temperature accurately in that region. But the computational time increases with the fineness of mesh. Since fine mesh is required only around the arc source, adaptivity of the input mesh according to the position of the arc source is efficient. The remeshing technique gives a fine mesh in the high temperature region around the arc and a coarse mesh in other region at any time step. With this it is possible to achieve desired accuracy with less computation time. In this study a transient adaptive mesh, remeshing technique, is developed and calculated temperature for a sample problem.

• Journal of Magnetics
• /
• 제6권2호
• /
• pp.61-65
• /
• 2001

The Hopkinson effect in the HDDR-treated $Nd_{15}Fe_{77}B_8$ allay was examined in detail by means of a thermo-magnetic analysis with low magnetic field (600 Oe). The emergence and magnitude of maximum in magnetisation in the thermomagnetic curve due to the Hopkinson effect was correlated with the grain structure and coercivity of the HDDR-treated material. The HDDR-treated materials showed a clear Hopkinson effect (maximum in magnetisation just below the Curie temperature of the $Nd_2Fe_{14}B\;$ phase) on heating. The magnitude of the magnetisation rise due to the Hopkinson effect became smaller as the recombination time increased. The magnetisation recovery at room temperature on cooling from above the Curie temperature became smaller as the recombination time increased. The HDDR-treated materials with shorter recombination time, finer grain size and higher coercivity showed larger magnetisation maximum due to the Hopkinson effect in the thermo-magnetic curve.