• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.7
• /
• pp.1651-1656
• /
• 1995

The adhesively bonded tubular single lap joint shows large nonlinear behavior in the loaddisplacement relation, because structural adhesives for the joint are usually rubber toughened, which endows adhesives with nonlinear shear properties. since the majority of load transfer of the adhesively bonded tubular single lap joint is accomplished by the nonlinear behavior of the adhesive, its torque transmission capability should be calculated incorporating nonlinear shear properties. However, both the analytic and numerical analyses become complicated if the nonlinear shear properties of the adhesive are included during the calculation of torque transmission capabilities. In this paper, in order to obtain the torque transmission capabilities easily, an iterative solution which includes the nonlinear shear properties of the adhesive was derived using the analytic solution with the linear shear properties of the adhesive. Since the iterative solution can be obtained very fast due to its simplicity, it has been found that it can be used in the design of the adhesively bonded tubular single lap joint.

• Journal of Biomedical Engineering Research
• /
• v.32 no.2
• /
• pp.93-104
• /
• 2011

The purpose of this study was to investigate lower-limb joint torque of the two groups as it changed by somatosensory stimulation during the descent down three stairs of different heights and to describe the difference between the two groups, which are young people group and elderly people group. Subjects of each groups climbed down a stair at four stimulation conditions, which are non-stimulation, tibialis anterior tendon stimulation, achilles tendon stimulation, tibialis anterior - achilles tendon stimulation. Motion capture data were collected using 3D optoelectric motion tracking system that utilizes active infrared LEDs, near infrared sensor and force plate. The obtained motion capture data was used to build 3D computer simulation model. The results show that lower-limb joint torque of the two groups changed with somatosensory stimulation as they descended the stairs and the joint torque of the two groups differed from each other.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.3
• /
• pp.196-201
• /
• 2016

This paper analyses the characteristics of a stiffness-based rehabilitation mechanism for improving the function of the elbow joint of a human. We consider an elastic string as a tool for the elbow joint rehabilitation, where the string has been modeled as a linear spring with a stiffness. For effective rehabilitation training by using such a mechanism, we need to analyse the available torque characteristics of the elbow joint according to the stiffness of the string. Through various simulations, the torque pattern and its range of the elbow joint by assigning the stiffness of the string have been identified for a pre-defined trajectory of motion of the elbow joint. Finally, we show that the specified stiffness-based rehabilitation scheme can be used for effective rehabilitation of the elbow joint.

• Science of Emotion and Sensibility
• /
• v.7 no.4
• /
• pp.19-24
• /
• 2004

The purpose of this study is to evaluate the possibility of identifying joint damping property through commercially available isokinetic ergometer (BIODEX). The proposed method is to estimate the damping torque of the knee joint from the difference between the external joint torque for maintaining isokinetic movement and the gravity torque of the lower leg. The damping torque was estimated at various joint angular velocities, from which the damping property would be derived. Measurement setup was composed of the BIODEX system with an external force sensor and Labview system. Matlab was used in the analysis of the damping property. The experimental result showed that the small variation in angular velocity due to acceleration and deceleration of the crank arm resulted in greater change of inertial torque than the damping torque. Therefore, the estimation of damping property from the isokinetic movement is difficult.

• The Journal of Korea Robotics Society
• /
• v.13 no.3
• /
• pp.157-163
• /
• 2018

This paper deals with the development and application of control algorithms for series elastic relief robots for rescue operations in harsh environment like disasters or battlefield. The joint controller applied in this paper has a cascade structure combining inner loop for torque control and outer loop for position control. The torque loop contains feedforward and feedback controller and disturbance observer for independent, decentralized joint control. The effect of the elastic component and motor dynamics are treated as the nonlinear disturbance and compensated with the disturbance observer of torque controller. For the collision detection, Band Designed Disturbance Observer is configured to recognize/respond to external disturbance robustly in the continuously changing environment. The controller is applied to a 7-dof series elastic manipulator to evaluate the torque tracking and collision detection/response performance.

• The Journal of Korea Robotics Society
• /
• v.15 no.2
• /
• pp.169-176
• /
• 2020

This paper studied the collision detection of robot manipulators for safe collaboration in human-robot interaction. Based on sensor-based collision detection, external torque is detached from subtracting robot dynamics. To detect collision using joint torque sensor data, a comparative study was conducted using data-based machine learning algorithm. Data was collected from the actual 3 degree-of-freedom (DOF) robot manipulator, and the data was labeled by threshold and handwork. Using support vector machine (SVM), decision tree and k-nearest neighbors KNN method, we derive the optimal parameters of each algorithm and compare the collision classification performance. The simulation results are analyzed for each method, and we confirmed that by an optimal collision status detection model with high prediction accuracy.

• Physical Therapy Korea
• /
• v.20 no.3
• /
• pp.45-53
• /
• 2013

The purpose of this study was to examine the differentiation of proprioception, invertor and evertor muscle strength, and time to peak torque at a velocity of $300^{\circ}/sec$ of the ankle joint in people with or without functional ankle instability (FAI). Nineteen subjects with a history of ankle sprain participated. All subjects were divided into FAI group ($n_1=9$, Cumberland ankle instability tool (CAIT)${\leq}24$) and a control group ($n_2=10$) based on their CAIT scores. Isokinetic dynamometer was used to measure the sense of active joint position of the ankle at mid-range and end-range of an inversion motion and invertor as well as the evertor muscle strength and time to peak torque at $300^{\circ}/s$. The FAI group showed a statistically reduction in invertor and evertor muscle strength and time to peak torque when compared to the control group (p<.05). Muscle strength and time to peak torque of the invertor and evertor, as well as the sense of active joint position at end-range were also lower in the FAI group than in the control (p<.05). Correlations between CAIT score and position sense at end-range (r=-.577) and invertor muscle strength (r=.554) were statistically significant (p<.05). Individuals with FAI showed reduction in invertor and evertor muscle strength and recruitment time as well as in proprioception of the ankle joint. Thus, proprioception and invertor and evertor muscle strength of the ankle joint at fast angular velocity may be investigated when examining and planning care for individuals with FAI.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.2
• /
• pp.73-79
• /
• 1999

Most of mechanical structures are combined of substructures such as beams and/or plates. There are few systems with unibody structures but are many systems with united body structures. Generally the dynamic a nalysis of whole structures is performed under alternation load. In the structure design, the analysis of each bolted joint is more important than others for zero severity. This paper presents the analysis method of contact stress distribution factor in the bolted joint with variable fastening torque on joints in the structure. At first, a static vibration test was performed to find out a nominal stress of bolt jointed plates from the relationship between natural frequency and nominal stress. Then a contact stress was computed at contact point between bolt and plate in the structure. It is believed that the proposed method has promisiong implications for safer design with index of contact stress distribution factor and has merits for cost-down and saving time at the beginning of vehicle development.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.8 no.6
• /
• pp.584-590
• /
• 1984

This study is to develop a program, with which the motion of the system can be simulated in view of kinematics and dynamics, and then evaluate functional capabilities of many robots in order to select the most suitable one for any given working conditions. According to the theory of Denavit & Hartenberg, rectangular coordinate is set at each joint in the robot of six joints, as this one is the major concern, and transformation matrices are derived between any two coordinates. The necessary displacement of each joint for executing a given a work is obtained from the position and posture transformation and the in-stantaneous velocity of the joint is got from given velocity distribution of the path. The necessary torque of each joint is finally calculated by Newton-Euler Method. This simulation program is applied to a robot with six rotational joints, Rotational angle and torque to time which has a given motion trajectory are figured and also torque to r.p.m.

• Journal of The Korean Society of Integrative Medicine
• /
• v.1 no.2
• /
• pp.47-57
• /
• 2013

Purpose : The purpose of this study was to compare the Effects of Knee Extensor, Flexor Muscle Strength and Joint Position Sense in Squat Exercise on Variety Surface. Method : Subjuects were consisit of 30 male and female who had non disorder knee joint. we had devided 3 group(control group, balance pad group, and togu group) and we measured that knee joint $15^{\circ}/45^{\circ}$proprioception(position sense) and Peak Torque of knee extensor, flexor muslce at $60^{\circ}/sec$, $180^{\circ}/sec$ angular velocity. Result : First, knee joint $15^{\circ}$proprioception(position sense) of balance pad and togu group was significantly different after exercise(p<.05), but only balance pad group was significantly different at knee joint $45^{\circ}$. Second, knee extensor Peak Torque of balance pad and togu group was significantly different at $60^{\circ}/sec$, $180^{\circ}/sec$ angular velocity(p<.05). Third, knee flexor Peak Torque of balance pad and togu group was significantly different at $60^{\circ}/sec$, $180^{\circ}/sec$ angular velocity(p<.05). Conclusion : Squat exercises on the balance pad and togu were affects knee joint proprioception and muscle strength improvement. These results suggest that squat exercise on the unstable surface is effective for prevention of knee joint injury and functional activity.