• 대한기계학회논문집
• /
• 제19권7호
• /
• pp.1651-1656
• /
• 1995

The adhesively bonded tubular single lap joint shows large nonlinear behavior in the loaddisplacement relation, because structural adhesives for the joint are usually rubber toughened, which endows adhesives with nonlinear shear properties. since the majority of load transfer of the adhesively bonded tubular single lap joint is accomplished by the nonlinear behavior of the adhesive, its torque transmission capability should be calculated incorporating nonlinear shear properties. However, both the analytic and numerical analyses become complicated if the nonlinear shear properties of the adhesive are included during the calculation of torque transmission capabilities. In this paper, in order to obtain the torque transmission capabilities easily, an iterative solution which includes the nonlinear shear properties of the adhesive was derived using the analytic solution with the linear shear properties of the adhesive. Since the iterative solution can be obtained very fast due to its simplicity, it has been found that it can be used in the design of the adhesively bonded tubular single lap joint.

• 대한의용생체공학회:의공학회지
• /
• 제32권2호
• /
• pp.93-104
• /
• 2011

The purpose of this study was to investigate lower-limb joint torque of the two groups as it changed by somatosensory stimulation during the descent down three stairs of different heights and to describe the difference between the two groups, which are young people group and elderly people group. Subjects of each groups climbed down a stair at four stimulation conditions, which are non-stimulation, tibialis anterior tendon stimulation, achilles tendon stimulation, tibialis anterior - achilles tendon stimulation. Motion capture data were collected using 3D optoelectric motion tracking system that utilizes active infrared LEDs, near infrared sensor and force plate. The obtained motion capture data was used to build 3D computer simulation model. The results show that lower-limb joint torque of the two groups changed with somatosensory stimulation as they descended the stairs and the joint torque of the two groups differed from each other.

• 한국지능시스템학회논문지
• /
• 제26권3호
• /
• pp.196-201
• /
• 2016

본 논문에서는 인간의 팔꿈치 관절의 기능을 활성화하기 위한 강성 기반 재활 메커니즘의 특성을 분석하 고자 한다.여기서,팔굼치 관절의 재활을 위한 도구는 탄성 줄을 사용하고, 사용된 줄은 선형 스프링으로 모델링하여 강성값으로 나타낸다. 이러한 메커니즘을 이용한 팔꿈치 관절 재활 훈련을 효과적으로 하기 위해서는 줄의 강성값에 따라 팔꿈치 관절에 가용할 수 있는 토오크 특성을 분석할 필요가 있다. 이러한 관점에서 다양한 시뮬레이션을 통하여 탄성 줄의 강성값 설정에 따른 팔꿈치 관절의 토오크 패턴 및 범위를 사전에 정의된 팔꿈치 관절의 운동 경로에 대하여 확인한다. 결과적으로, 이러한 강성 기반 재활 메커니즘이 팔꿈치 관절의 효과적인 재활을 수행하는데 유용하게 활용될 수 있음을 보인다.

• 감성과학
• /
• 제7권4호
• /
• pp.19-24
• /
• 2004

본 연구의 목적은 관절계 댐핑특성을 상용 에르고미터(BIODEX)의 등속운동을 이용하여 파악할 수 있는지를 평가하는 것이다. 제안된 방법은 등속운동을 유지하기 위해 인가한 외부토크와 하퇴의 관성토크의 차로부터 슬관절의 댐핑토크를 계산하는 것이다. 댐핑토크는 여러 가지 관절각속도에서 산출되었고, 이로부터 댐핑특성을 유도하였다. 실험장치는 BIODEX 시스템과 별도의 힘센서 및 Labview 시스템으로 구성되었다. 댐핑특성의 해석에는 Matlab을 사용하였다. 실험결과로부터 등속운동의 기동 및 종료를 위한 크랭크 암의 가속 및 감속으로 인한 미세한 각속도의 변화가 댐핑토크의 영향보다 큰 관성토크를 유발하는 것을 알 수 있었다. 따라서, 현재의 등속운동장비로는 댐핑특성을 추정하기가 어렵다고 보여진다.

• 로봇학회논문지
• /
• 제13권3호
• /
• pp.157-163
• /
• 2018

This paper deals with the development and application of control algorithms for series elastic relief robots for rescue operations in harsh environment like disasters or battlefield. The joint controller applied in this paper has a cascade structure combining inner loop for torque control and outer loop for position control. The torque loop contains feedforward and feedback controller and disturbance observer for independent, decentralized joint control. The effect of the elastic component and motor dynamics are treated as the nonlinear disturbance and compensated with the disturbance observer of torque controller. For the collision detection, Band Designed Disturbance Observer is configured to recognize/respond to external disturbance robustly in the continuously changing environment. The controller is applied to a 7-dof series elastic manipulator to evaluate the torque tracking and collision detection/response performance.

• 로봇학회논문지
• /
• 제15권2호
• /
• pp.169-176
• /
• 2020

This paper studied the collision detection of robot manipulators for safe collaboration in human-robot interaction. Based on sensor-based collision detection, external torque is detached from subtracting robot dynamics. To detect collision using joint torque sensor data, a comparative study was conducted using data-based machine learning algorithm. Data was collected from the actual 3 degree-of-freedom (DOF) robot manipulator, and the data was labeled by threshold and handwork. Using support vector machine (SVM), decision tree and k-nearest neighbors KNN method, we derive the optimal parameters of each algorithm and compare the collision classification performance. The simulation results are analyzed for each method, and we confirmed that by an optimal collision status detection model with high prediction accuracy.

• 한국전문물리치료학회지
• /
• 제20권3호
• /
• pp.45-53
• /
• 2013

The purpose of this study was to examine the differentiation of proprioception, invertor and evertor muscle strength, and time to peak torque at a velocity of $300^{\circ}/sec$ of the ankle joint in people with or without functional ankle instability (FAI). Nineteen subjects with a history of ankle sprain participated. All subjects were divided into FAI group ($n_1=9$, Cumberland ankle instability tool (CAIT)${\leq}24$) and a control group ($n_2=10$) based on their CAIT scores. Isokinetic dynamometer was used to measure the sense of active joint position of the ankle at mid-range and end-range of an inversion motion and invertor as well as the evertor muscle strength and time to peak torque at $300^{\circ}/s$. The FAI group showed a statistically reduction in invertor and evertor muscle strength and time to peak torque when compared to the control group (p<.05). Muscle strength and time to peak torque of the invertor and evertor, as well as the sense of active joint position at end-range were also lower in the FAI group than in the control (p<.05). Correlations between CAIT score and position sense at end-range (r=-.577) and invertor muscle strength (r=.554) were statistically significant (p<.05). Individuals with FAI showed reduction in invertor and evertor muscle strength and recruitment time as well as in proprioception of the ankle joint. Thus, proprioception and invertor and evertor muscle strength of the ankle joint at fast angular velocity may be investigated when examining and planning care for individuals with FAI.

• 한국생산제조학회지
• /
• 제8권2호
• /
• pp.73-79
• /
• 1999

Most of mechanical structures are combined of substructures such as beams and/or plates. There are few systems with unibody structures but are many systems with united body structures. Generally the dynamic a nalysis of whole structures is performed under alternation load. In the structure design, the analysis of each bolted joint is more important than others for zero severity. This paper presents the analysis method of contact stress distribution factor in the bolted joint with variable fastening torque on joints in the structure. At first, a static vibration test was performed to find out a nominal stress of bolt jointed plates from the relationship between natural frequency and nominal stress. Then a contact stress was computed at contact point between bolt and plate in the structure. It is believed that the proposed method has promisiong implications for safer design with index of contact stress distribution factor and has merits for cost-down and saving time at the beginning of vehicle development.

• 대한기계학회논문집
• /
• 제8권6호
• /
• pp.584-590
• /
• 1984

본 연구에서는 Luh, Walker와 Paul이 제안한 Newton Euler 방법에 따라 토오 크를 계산하였고, 임으로 로봇을 선택하여 시뮬레이션 크로그램을 적용하였다.

• 대한통합의학회지
• /
• 제1권2호
• /
• pp.47-57
• /
• 2013

Purpose : The purpose of this study was to compare the Effects of Knee Extensor, Flexor Muscle Strength and Joint Position Sense in Squat Exercise on Variety Surface. Method : Subjuects were consisit of 30 male and female who had non disorder knee joint. we had devided 3 group(control group, balance pad group, and togu group) and we measured that knee joint $15^{\circ}/45^{\circ}$proprioception(position sense) and Peak Torque of knee extensor, flexor muslce at $60^{\circ}/sec$, $180^{\circ}/sec$ angular velocity. Result : First, knee joint $15^{\circ}$proprioception(position sense) of balance pad and togu group was significantly different after exercise(p<.05), but only balance pad group was significantly different at knee joint $45^{\circ}$. Second, knee extensor Peak Torque of balance pad and togu group was significantly different at $60^{\circ}/sec$, $180^{\circ}/sec$ angular velocity(p<.05). Third, knee flexor Peak Torque of balance pad and togu group was significantly different at $60^{\circ}/sec$, $180^{\circ}/sec$ angular velocity(p<.05). Conclusion : Squat exercises on the balance pad and togu were affects knee joint proprioception and muscle strength improvement. These results suggest that squat exercise on the unstable surface is effective for prevention of knee joint injury and functional activity.