Kim, Hwan Yeol;An, Sang Mo;Jung, Jaehoon;Ha, Kwang Soon;Song, Jin Ho
Nuclear Engineering and Technology
/
제49권7호
/
pp.1547-1554
/
2017
VESTA (Verification of Ex-vessel corium STAbilization) and VESTA-S (-small) test facilities were constructed at the Korea Atomic Energy Research Institute in 2010 to perform various corium melt experiments. Since then, several tests have been performed for the verification of an ex-vessel core catcher design for the EU-APR1400. Ablation tests of an impinging $ZrO_2$ melt jet on a sacrificial material were performed to investigate the ablation characteristics. $ZrO_2$ melt in an amount of 65-70 kg was discharged onto a sacrificial material through a well-designed nozzle, after which the ablation depths were measured. Interaction tests between the metallic melt and sacrificial material were performed to investigate the interaction kinetics of the sacrificial material. Two types of melt were used: one is a metallic corium melt with Fe 46%, U 31%, Zr 16%, and Cr 7% (maximum possible content of U and Zr for C-40), and the other is a stainless steel (SUS304) melt. Metallic melt in an amount of 1.5-2.0 kg was delivered onto the sacrificial material, and the ablation depths were measured. Penetration tube failure tests were performed for an APR1400 equipped with 61 in-core instrumentation penetration nozzles and extended tubes at the reactor lower vessel. $ZrO_2$ melt was generated in a melting crucible and delivered down into an interaction crucible where the test specimen is installed. To evaluate the tube ejection mechanism, temperature distributions of the reactor bottom head and in-core instrumentation penetration were measured by a series of thermocouples embedded along the specimen. In addition, lower vessel failure tests for the Fukushima Daiichi nuclear power plant are being performed. As a first step, the configuration of the molten core in the plant was investigated by a melting and solidification experiment. Approximately 5 kg of a mixture, whose composition in terms of weight is $UO_2$ 60%, Zr 10%, $ZrO_2$ 15%, SUS304 14%, and $B_4C$ 1%, was melted in a cold crucible using an induction heating technique.
Quantum beam technology has been expected to develop breakthroughs for nanotechnology during the third basic plan of science and technology (2006~2010). Recently, Green- or Life Innovations has taken over the national interests in the fourth basic science and technology plan (2011~2015). The NIMS (National Institute for Materials Science) has been conducting the corresponding mid-term research plans, as well as other national projects, such as nano-Green project (Global Research for Environment and Energy based on Nanomaterials science). In this lecture, the research trends in Japan and NIMS are firstly reviewed, and the typical achievements are highlighted over key nanotechnology fields. As one of the key nanotechnologies, the quantum beam research in NIMS focused on synchrotron radiation, neutron beams and ion/atom beams, having complementary attributes. The facilities used are SPring-8, nuclear reactor JRR-3, pulsed neutron source J-PARC and ion-laser-combined beams as well as excited atomic beams. Materials studied are typically fuel cell materials, superconducting/magnetic/multi-ferroic materials, quasicrystals, thermoelectric materials, precipitation-hardened steels, nanoparticle-dispersed materials. Here, we introduce a few topics of neutron scattering and ion beam nanofabrication. For neutron powder diffraction, the NIMS has developed multi-purpose pattern fitting software, post RIETAN2000. An ionic conductor, doped Pr2NiO4, which is a candidate for fuel-cell material, was analyzed by neutron powder diffraction with the software developed. The nuclear-density distribution derived revealed the two-dimensional network of the diffusion paths of oxygen ions at high temperatures. Using the high sensitivity of neutron beams for light elements, hydrogen states in a precipitation-strengthened steel were successfully evaluated. The small-angle neutron scattering (SANS) demonstrated the sensitive detection of hydrogen atoms trapped at the interfaces of nano-sized NbC. This result provides evidence for hydrogen embrittlement due to trapped hydrogen at precipitates. The ion beam technology can give novel functionality on a nano-scale and is targeting applications in plasmonics, ultra-fast optical communications, high-density recording and bio-patterning. The technologies developed are an ion-and-laser combined irradiation method for spatial control of nanoparticles, and a nano-masked ion irradiation method for patterning. Furthermore, we succeeded in implanting a wide-area nanopattern using nano-masks of anodic porous alumina. The patterning of ion implantation will be further applied for controlling protein adhesivity of biopolymers. It has thus been demonstrated that the quantum beam-based nanotechnology will lead the innovations both for nano-characterization and nano-fabrication.
The Bauhaus educational method gave the strong influences on Modern Japanese art and design education. In the 1920s and 1930s, Japan allied with Germany and Italy politically and tried to receive German system to be modernized. The reception of the Bauhaus and Moholy-Nagy's photographic theory was one of those activities at that time. Japanese intellectual class went to the Bauhaus and studied there; Ishimoto Kikuchi, Nakata Sadanosuke, Mijutani Takehiko, Yamawaki Iwao and Yamawaki Michiko(Yamawaki Iwao's wife). Especially, Yamawaki Iwao studied about the architecture at the Bauhaus, but his interest moved toward the photography and the photomontage based on Moholy-Nagy's theory. He studied at the photography workshop of the Bauhaus presented by Peterhans irregularly. Even though Yamawaki Iwao was an architect, he wanted to be admitted as an expert for the photomontage that he particularly studied at the Bauahus as a Bauhaus member. He had presented many articles about the photomontage at the photography magazines in Japan in order to introduce it to Japan since he returned in 1933. Thus, Yamawaki Iwao is the important person when we look back the Modern Japanese design and art history. In Japan, the art and design systems are managed by the Bauhaus educational system until now, and it has become a kind of cultural legacy in Modern Japan; The university of Tama and The university of Tsukuba are the representative educational systems which are based on the Bauhaus legacy. However, Yamawaki Iwao had been concealed as a photographer in Japanese design and photography history until the retrospective discuss named by 'Bauhaus syashin(Bauhaus Photographies)' at the photography magazine, Deja-vu in 1995 and the retrospective exhibition titled as 'Bauhaus syashin(bauahustofografie)' in 1997. This study rethinks of Yamawaki Iwao's historical position while looking at the term as 'Bauhaus Syashin(Bauhaus Photographies)' used in Japan. It is very important to bear in mind Moholy-Nagy's wide variety of approaches to photography at the Bauhaus, but it is impossible to name it 'Bauhaus style'. 'Bauhaus style' is the international style in architecture, but that was never a Bauhaus style in photography. Eugene J. Prakapas indicated that the vague term of 'Bauhaus Photographies' in his article in 1985 as well. This study considers the historical background for the mistake of the term of 'Bauhaus Syashin(Bauhaus Photographies)' in Modern Japanese history, while looking at Yamawaki Iwao's photomontage faintly entering on the historical stage again to discuss the reception of the photomontage from him. In particular, Some of Yamawaki Iwao's photomontage presented as the wall photography in Japan during the Second World War, that was related to the propaganda of Japanese government. It had not been known well in the modern Japanese art and design history because it was related to a declaration of the Second World War by Japan. However, the historical position of his photomontage is very important for Japanese history when we rethink of the reception of the Bauhaus and Moholy-Nagys' photographic theory to build up the Japanese modern history. In the result, this study wants to discuss that the mistake of the term of 'Bauhaus syashin(Bauhaus Photographies)' in Japan is related to the interpretation for the the historical position for Yamawaki Iwao's photomontage in the reception of Bauhaus and Moholy-Nagy's photography in Japan.
본 논문에서는 RAM(Reliability, Availability, and Maintainability)과 RCM(Reliability Centered Maintenance) 개념을 기반으로 하는 틸팅 열차 유지보수 시스템(TRMS; Tilting Rolling-stock Maintenance System)의 S/W 구축방안을 제시하였다. 먼저 RCM 개념 및 절차에 대하여 소개하고 TRMS S/W가 어떻게 이러한 개념과 절차를 구현하는지에 관하여 논하였다. TRMS는 네 개의 모듈 즉 시스템 및 운영정보 모듈, FMECA 모듈, RAM 정보 모듈, RCM 분석 모듈로 구성되어 있다. 시스템 및 운영정보 모듈에서는 RCM 분석의 기초 작업인 데이터 수집을 위한 인터페이스가 제공되고, FMECA 모듈에서는 시스템 및 운영정보 모듈의 고장 데이터를 이용하여 고장영향 분석을 할 수 있는 워크 스페이스(workspace)를 제공한다. RAM 모듈에서는 Weibull 분포의 신뢰성과 고장률을 산출하기위한 알고리즘이, RCM 분석모듈에서는 작업주기와 작업비용을 계산하기위한 계산식이 제안되었다. 유지보수 관계자들이 RCM의 장점을 충분히 인식한다면 RCM을 다른 전동차 유지보수 시스템에도 쉽게 적용할 수 있을 것이다.
The lower limb orthosis with a pneumatic rubber actuator, which is intended for the assistance and the enhancement of muscular activities of lower limbs was developed in this study. Compared to other knee extension assistive devices being developed by other researchers, our device is designed especially for the elderly people and intended only for slight assistance so that the subjects can keep their muscular strength. For the effectiveness of system, muscular activities of major muscles in lower limbs during sit-to-stand (STS) and squat motion were measured and analyzed. Subjects were performed the STS and squat motion with and without lower limb orthosis. We made comparison muscular activities between with and without lower limb orthosis. Lower limb orthosis was controlled using muscular stiffness force feedback that is controlled by muscular activities of the measured muscle from force sensor. For analysis of muscular activities, electromyography of the subjects was measured during STS and squat motion, and these were measured using MP 150(BIOPAC Systems, Inc.). Muscles of interest were rectus femoris(RF), vastus lateralis(VL), vastus medialis(VM) and vastus intermedius(VI) muscles in lower limbs of the right side. A biodex dynamometer was used to measure the maximal concentric isokinetic strength of the knee extensors of wearing and not wearing orthosis on right side. The test were performed using the concentric isokinetic mode of test with the velocity set at 60°/s for muscles around the knee joints. The experimental result showed that muscular activities in lower limbs wearing orthosis using muscular stiffness force of a vastus medialis muscle was reduced and knee extension torque of an knee joint wearing lower limb orthosis was increased. With this, we confirmed the effectiveness of the developed lower limb orthosis.
본 연구의 목적은 초등학교 4학년 학생들을 대상으로 수업행동의 개선을 위하여 수업행동을 수업 방해 행동과 수업 참여 행동으로 구분하고, 자기점검기법이 대상 아동들의 수업 방해 행동과 수업 참여행동에 어떠한 영향을 미치는지를 알아보고자 하는 데 있다. 이러한 연구목적을 달성하기 위해 설정한 연구문제는 첫째, 자기점검기법이 아동의 수업 방해 행동에 어떠한 영향을 미치는가. 둘째, 자기점검기법이 아동의 수업 참여 행동에 어떠한 영향을 미치는가를 밝히는 것이다. 연구 문제에 따른 연구 가설은 1. 자기점검기법은 아동의 수업방해행동을 감소시킬 것이다. 2. 자기점검 기법은 아동의 수업참여행동을 증가시킬 것이다로 세웠다. 연구 대상은 전라북도 J시에 소재하는 A초등학교 4학년 $\circledcirc$반 일반 학급 아동 12명으로 이는 기초선 기간의 행동측정 결과 수업 방해 행동 비율이 높은 8명과 수업 참여 행동 비율이 낮은 8명을 선정하였고, 양 쪽 그룹 모두에 속하는 아동이 4명이다. 이들의 사전 행동 관찰을 거쳐 개별적으로 수업 방해 행동 및 수업 참여 행동의 목표 행동을 설정하도록 하고, 기초선 1 기간 동안 각 행동의 빈도를 연구자가 두 명의 관찰자와 함께 측정하였다. 이후 중재 1 기간 동안 자기점검기법이 적용되었고, 아동 행동변화의 효과가 자기점검기법임을 밝히기 위하여 기초선 2 기간을 가졌다. 이후 중재 2 기간 동안 다시 자기점검기법이 실시되었으며, 10일 후 유지정도를 측정하기 위하여 사후 점검을 실시하였다. 개별 아동의 행동 발생 빈도를 변화 그래프를 이용하여 나타냈으며, 양적 결과의 제한점을 보완하기 위해 대상 아동들의 사후 소감문을 분석하였고, 연구자의 관찰내용을 제시하였다. 이 연구를 통해 얻어진 결과를 요약하면 첫째, 자기점검기법은 아동의 수업 방해 행동의 감소와 변화된 행동의 유지에 긍정적 효과를 미치는 것으로 나타났다. 둘째, 자기점검기법은 아동의 수업 참여 행동의 증가와 변화된 행동의 유지에 긍정적 효과를 미치는 것으로 나타났다.
본 연구는 또래 칭찬활동 프로그램이 초등학생의 교우관계와 학급응집성에 미치는 영향을 알아보기 위하여 실시되었다. 서울특별시에 소재한 J초등학교 5학년 2개 학급을 실험집단과 통제집단으로 나누어 실험집단에 프로그램을 처치하고 사후검사와 추후검사를 실시하여 프로그램의 효과를 검증하였다. 프로그램의 타당도를 검증하기 위하여 예비 실시를 통해 미비점과 문제점을 보완하였다. 연구 결과 또래 칭찬활동프로그램을 처치한 실험집단은 교우관계와 학급응집성에서 모두 유의미한 효과가 나타났으며, 아동 소감과 연구자의 관찰에서도 이 프로그램을 통해 아동의 교우관계가 개선되고, 학급응집성이 증가한 것을 알 수 있었다. 그러나 통제집단에서도 학기 초 아동의 학급생활 적응으로 인해 교우관계의 일부 하위변인에서 유의미한 효과가 나타났으며, 추후검사에서 실험집단 아동의 교우관계 하위변인 중 일부에서 효과가 감소한 것이 드러나기도 하였다. 학급응집성은 사후검사보다 추후검사에서 더욱 유의미하게 증가한 점으로 보아 본 연구에서 실시한 또래 칭찬활동 프로그램은 학급응집성의 증가와 유지에 긍정적인 영향을 미친다는 것을 알 수 있었다. 앞으로의 연구에서는 교우관계를 지속적으로 높이기 위한 프로그램의 내용 수정이나 추후지도에 관한 연구가 필요하다고 본다.
본 연구의 목적은 진로발달단계에서 가장 초보단계인 진로인식단계에 있는 초등학생들을 대상으로 초등학생용 직업카드를 활용한 진로교육이 남 여 초등학생의 진로발달에 긍정적인 효과를 미치는지를 검증하는 것이다. 경남 J시에 위치한 '안골포'초등학교의 5학년 7개 반 중 1개 반 32명(남학생 15명과 여학생 17명)을 대상으로, 2009년 10월 28일부터 2009년 11월12일 까지 3주간, 주 2회기 총 6회기로 한 회기 당 40분~45분씩 초등학생용 직업카드를 활용한 진로교육을 실시하였다. 본 연구 결과를 요약하면; 첫째, 초등학생용 직업카드를 활용한 진로교육이 초등학생의 '진로지향성', '직업의 이해', '직업적성편견', '자기이해', '자율성' 발달에 긍정적인 효과가 있었다. 둘째, 초등학생용 직업카드를 활용한 진로교육이 초등학교 남학생의 '진로지향성', '직업적성편견', '자율성' 발달에 긍정적인 효과가 있었다. 셋째, 초등학생용 직업카드를 활용한 진로교육이 초등학교 여학생의 '진로지향성', '직업의 이해', '직업적성편견' 발달에 긍정적인 효과가 있었다. 이상의 결과를 통해 초등학생용 직업카드를 활용한 진로교육이 남 여 초등학생의 진로발달에 효과적이라는 것을 알 수 있었다.
본 연구는 우리나라 취업모와 보육시설에 다니는 24-48개월 자녀 67쌍을 대상으로 이들의 정서적 가용성 경향을 알아보고 어머니와 아동의 정서적 가용성을 설명하는 취업모와 아동 관련 변인은 무엇인지 조사하였다. 어머니-아동의 정서적 가용성은 Biringen, Robinson과 Emde(1998)가 개발한 정서적 가용성 척도(Emotional Availability Scales: EA, 3rd)를 사용하였고, 어머니의 일/가족 갈등, 어머니의 양육 스트레스, 어머니의 우울수준, 아동기질, 개인적 배경을 측정하였다. 본 연구 결과는 다음과 같다. 취업모와 보육시설에 다니는 24-48개윌 된 자녀의 정서적 가용성은 전체적으로 중간점수 보다 약간 높은 수준으로 나타났다. 취업모 관련변인에 따른 어머니-아동 정서적 가용성의 차이에서는 취업모의 교육 수준, 가정의 경제적 수준이 유의하였으며, 어머니-아동 정서적 가용성과 자녀와의 관계로 인한 양육스트레스 간에는 유의한 부적 상관관계가 나타났다. 아동 관련변인에 따른 어머니-아동 정서적 가용성의 차이에서는 아동이 보육시설에 처음 등원한 시기 변인만 유의한 경향이 나타났다. 취업모와 아동 관련변인 중 가정의 경제적 수준, 자녀관계 양육스트레스, 아동의 보육시설 첫 등원 시기가 어머니의 민감성과 아동의 반응성차원을 20%정도 유의하게 설명하였다.
We measure the topology of the galaxy distribution using the Seventh Data Release of the Sloan Digital Sky Survey (SDSS DR7), examining the dependence of galaxy clustering topology on galaxy properties. The observational results are used to test galaxy formation models. A volume-limited sample defined by Mr<-20.19 enables us to measure the genus curve with amplitude of G=378 at 6h-1Mpc smoothing scale, with 4.8% uncertainty including all systematics and cosmic variance. The clustering topology over the smoothing length interval from 6 to 10h-1Mpc reveals a mild scale-dependence for the shift and void abundance (A_V) parameters of the genus curve. We find strong bias in the topology of galaxy clustering with respect to the predicted topology of the matter distribution, which is also scale-dependent. The luminosity dependence of galaxy clustering topology discovered by Park et al. (2005) is confirmed: the distribution of relatively brighter galaxies shows a greater prevalence of isolated clusters and more percolated voids. We find that galaxy clustering topology depends also on morphology and color. Even though early (late)-type galaxies show topology similar to that of red (blue) galaxies, the morphology dependence of topology is not identical to the color dependence. In particular, the void abundance parameter A_V depends on morphology more strongly than on color. We test five galaxy assignment schemes applied to cosmological N-body simulations to generate mock galaxies: the Halo-Galaxy one-to-one Correspondence (HGC) model, the Halo Occupation Distribution (HOD) model, and three implementations of Semi-Analytic Models (SAMs). None of the models reproduces all aspects of the observed clustering topology; the deviations vary from one model to another but include statistically significant discrepancies in the abundance of isolated voids or isolated clusters and the amplitude and overall shift of the genus curve. SAM predictions of the topology color-dependence are usually correct in sign but incorrect in magnitude.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.