• 한국지반공학회논문집
• /
• 제28권1호
• /
• pp.29-39
• /
• 2012

본 연구에서는 암반근입 현장타설말뚝의 선단지지력에 영향을 미치는 주요 영향인자들과 이들 영향인자에 따른 선단지지력의 변화특성을 수치해석을 통하여 분석하였다. 수치해석은 일반적으로 널리 사용되는 연속체해석 중 유한차분해석(FDM)과 암반에 존재하는 불연속면(절리, 단층 등)의 특성을 고려할 수 있는 불연속체해석 중 개별요소해석(DEM)을 병행함으로서 해석의 정확도를 높였다. 그 결과, 암반에 근입된 현장타설말뚝의 선단지지력($q_{max}$)은 암반의 탄성계수($E_m$), 불연속면의 간격($S_j$)에 비례하여 증가하였으며, 말뚝의 직경(D)에는 반비례하는 것을 확인할 수 있었다. 또한 불연속면의 경사($i_j$)에 대해서는 불연속면의 경사($i_j$)가 $0^{\circ}$ < $i_j$ < $60^{\circ}$일 때의 선단지지력은 그 외 경사의 선단지지력에 비해 최대 약 50%까지 감소하였으며 이는 말뚝으로부터 전해진 하중에 의하여 말뚝하부 암반 자체 보다 암반의 불연속면에서 먼저 전단파괴가 발생하였기 때문인 것으로 판단된다. 불연속면의 경사($i_j$)가 불연속면의 내부마찰각(${\phi}_j$)과 근접할 때 선단지지력이 최소치에 가까운 것으로 나타났으며, 따라서 불연속면의 경사가 일반적인 암반 및 암반 불연속면 내부마찰각의 범위인 $20^{\circ}{\sim}40^{\circ}$에 존재할 때는 선단지지력의 산정 시 반드시 불연속면 경사의 영향을 고려해야하는 것으로 나타났다.

• 한국안전학회지
• /
• 제21권4호
• /
• pp.49-54
• /
• 2006

The evaluation of elastic-plastic fracture characteristic was investigated in ferrite steel SA 516- Gr70 used for reactor coolant piping elbow and support skirt of pressure vessels. This paper describes the effect of temperature on J-R curve characteristic of this material. The elastic-plastic fracture mechanics parameter J is obtained with unloading compliance method. The test method were analyzed according to ASTM E 813-89 and E 1152-89. Unloading compliance $J_{IC}$ tests were performed on 1 CT specimens at varied temperatures from $25^{\circ}C$ to about $400^{\circ}C$ using a high temperature extensometer. At all temperature, valid $J_{IC}$ measurements could be made and $J_{IC}$ decreased with increasing temperature. SEM fractography schematically illustrates microvoid initiation, growth and coalescence at the tip of a preexisting crack.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 추계 학술논문 발표대회
• /
• pp.157-158
• /
• 2018

In this study, the current tendency to replace a large amount of material admixture, which is fly ash (FA) and blast furnace slag (BS), into concrete is that high-grade cheese high admixture of high fluidity concrete In consideration of the substitution rate, we considered J-Ring to investigate the influence on the segregation resistance and the method of evaluating the classical segregation. In addition to the admixture replacement rate in the study results, the EIS using J-Ring became lower and the percentage of vehicles with segregation increased. Such a tendency is considered to be positive when J-Ring is used when segregation is judged if segregation degree is similar to EIS using J-Ring.

• 한국수산과학회지
• /
• 제54권5호
• /
• pp.733-741
• /
• 2021

Jeju island is the largest island of South Korea, and has a relatively warm climate due to its geographical characteristics. These features have fostered development of various fermented foods distinct to Jeju island. Therefore, the functional activity of the lactic acid bacteria (LAB) isolated from the Jeju region's traditional fermented foods, including Kimchi and Jeotgal was characterized in this study. Fifteen strains were isolated from 6 types of fermented food. These strains include Enterococcus spp., Lactoplantibacillus spp., and Weisella spp. Several experiments were carried out to assess functional characteristics including acid resistance, bile resistance, hemolysis, DPPH and ABTS radical scavenging activity, and cholesterol-lowering activity. Three isolated strains (J-4, J-6 and J-10) exhibited high acid resistance, while the other 3 isolates (J-1, J-4 and J-6) showed high bile salt resistance. The strains displayed varied DPPH and ABTS radical scavenging activity: 71.14-86.42% among the first 3 strains, and 50.11-75.11% among the remaining 3 strains. Cholesterol-lowering activities were in the range 15.74-82.90% for all isolated strains. In conclusion, these studies suggest that isolated LAB strains from Jeju island traditional fermented foods possess the potential for broader application in the food industry.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2000년도 춘계연구발표회 논문개요집
• /
• pp.42-43
• /
• 2000

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.154-154
• /
• 2009

Cr capping layer를 이용하여 Titanium germanide의 열적 안정성을 향상시키는 연구를 수행하였다. n-type Ge(100) 기판 위에 전자빔 증착기를 이용하여 30nm 두께의 Ti와 Cr capping layer를 증착하고 $400\;^{\circ}C$에서 $800\;^{\circ}C$까지 30초간 N2 분위기로 급속 열처리하여 Ti germanide를 형성하였다. XRD결과로부터 Cr capping layer의 유무에 관계 없이 Ti germanide가 형성된 것을 관찰할 수 있었다. Ge 기판 위에 CTLM 패턴을 형성하고 실험을 진행하여 Ti germanide의 I-V 측정 데이터를 통해 Ohmic 특성을 알아보았고, contact resistance, sheet resistance, specific contact resistance를 구하였다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제15권3호
• /
• pp.9-12
• /
• 2013

Current-voltage characteristic models of superconducting material are suggested by many researchers. These current-voltage characteristic models are important because they can be used for design or simulation of superconductor devices. But widely used current-voltage models of superconductor wire still have some limitations. For example, a standard E-J power model has no parameters related with stabilizer's resistance in superconductor wire. In this paper, a current-voltage characteristic modeling method for high temperature superconductor (HTS) tape with considering the effect of stabilizer is introduced. And a current-voltage characteristic of a HTS tape is measured under different stabilizer conditions. Those measured current-voltage characteristics of the HTS tape modeled with proposed modeling method and the modeling results are compared.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 A
• /
• pp.455-457
• /
• 2001

Grounding resistance is the basic performance indicator of grounding electrodes and the resistance has been calculated by simple equations, which is based on the assumption of uniform soil model. In this paper, tower grounding resistance is calculated assuming horizontally 2 layered soil model using finite element analysis method. A simple grouding design graph has been resulted from the calculation results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 춘계학술대회 논문집 전기설비전문위원
• /
• pp.169-172
• /
• 2004

The tower footing resistance is an extremely important parameter in the determination of lightning flashover. For the reduction of back flashover faults, power utility companies have had a concern to decrease the footing resistance. There are two manufactures of the conductivity concrete materials in Korea. In this paper, we investigated possibility of soil pollution due to the conductivity concrete materials. Also, we analyzed on the reduction characteristics of footing resistance of those.

• 대한기계학회논문집A
• /
• 제23권7호
• /
• pp.1112-1119
• /
• 1999

Fracture resistance(J-R) curves, which are used for the elastic-plastic fracture mechanics analyses, are known to be dependent on the cyclic loading history. The objective of this paper is to study the effect of reverse cyclic loading on J-R curves in CT specimens. The effect of two parameters was observed on the J-R curves during the reverse cyclic loading. One was the minimum-to-maximum load ratio(R) and the other was the incremental plastic displacement(${\delta}_{cycle}/{\delta}_i$), which is related to the amount of crack growth that occurs in a cycle. Fracture resistance test on CT specimens with varying load ratio and incremental plastic displacement were performed. For the SA 516 Gr. 70 steel, the results showed that the J-R curves were decreased with decreasing the load ratio and the incremental plastic displacement. When the load ratio was set to -1, the results of the J-R curves and the $J_i$ value were about $40{\sim}50$ percent of those for the monotonic loading condition. Also on condition that the incremental plastic displacement reached 1/40, the J-R curves and the $J_i$ value were about $50{\sim}60$ percent of those for the incremental plastic displacement of 1/10.