• Asian-Australasian Journal of Animal Sciences
• /
• 제26권8호
• /
• pp.1119-1126
• /
• 2013

The objective of this study was to compare the goodness of fit of four lactation curve models: Wood's Gamma model (WD), Wilmink (WL), and Pollott's multiplicative two (POL2) and three parameters (POL3) and to determine the environmental factors affecting the complete lactation curve of F1 dairy sheep under organic management. A total of 5,382 weekly milk yields records from 150 ewes, under organic management were used. Residual mean square (RMS), determination coefficients ($R^2$), and correlation (r) analysis were used as an indicator of goodness of fit for each model. WL model best fitted the lactation curves as indicated by the lower RMS values (0.019), followed by WD (0.023), POL2 (0.025) and POL3 (0.029). The four models provided total milk yield (TMY) estimations that were highly correlated (0.93 to 0.97) with observed TMY (89.9 kg). The four models under estimated peak yield (PY), whereas POL2 and POL3 gave nearer peak time lactation estimations. Ewes lambing in autumn had higher TMY and showed a typical curve shape. Higher TMY were recorded in second and third lambing. Season of lambing, number of lambing and type of lambing had a great influenced over TMY shaping the complete lactation curve of F1 dairy sheep. In general terms WL model showed the best fit to the F1 dairy sheep lactation curve under organic management.

• 호남수학학술지
• /
• 제42권4호
• /
• pp.747-755
• /
• 2020

The mathematical proof for establishing some new inequalities involving arithmetic, geometric, harmonic means for the arguments lying on the paths of triangular wave function (linear) and new parabolic function (curved) over the interval (0, 1) are discussed. The results representing an extension as well as strengthening of Ky Fan Type inequalities.

• 비파괴검사학회지
• /
• 제33권2호
• /
• pp.147-153
• /
• 2013

최근 가압경수로형 원전의 가압기 노즐과 안전단 사이의 이종용접부에서 일차수응력부식균열에 대한 건전성 확보가 중요한 관심사항으로 대두되고 있다. 가압기 노즐은 SA508 Gr.3 저합금강이며 안전단은 F316L 스테인리스강으로, 이들 두 재료 사이에 용접재로는 Alloy 82/182가 사용되었다. 재료 결함에 대한 건전성 평가를 위해서는 재료의 기계적 물성치, 특히 인장물성과 파괴물성이 확보되어야 한다. 그러나, 일반적인 재료 규격과 시험성적서에서는 상온의 인장물성이 제공되지만 고온의 인장물성과 파괴인성이 제공되지 않는다. 따라서, 본 논문에서는 상온과 원전 운전온도에서 SA508 Gr.3과 F316L 스테인리스강에 대한 인장시험과 J-R 파괴인성시험을 수행하고 그 결과를 수록하였다.

• Journal of Animal Science and Technology
• /
• 제45권5호
• /
• pp.711-724
• /
• 2003

본 연구는 1970년대 이후 축산기술연구소 대관령지소에서 출생한 한우 암소로부터 한우암소의 성장곡선 모수에 영향하는 환경요인의 효과를 추정함으로써 한우의 개량을 위한 정보를 얻고자 실시하였다. Gompertz 모형, von Bertalanffy 모형 및 Logistic 모형에 의해 추정된 성장곡선 모수들의 분산분석 결과는 모두 같은 경향을 나타냈는데, 출생년도-계절의 효과는 성숙체중, 성장비 및 성숙률 모두에게 영향을 미치며, 어미소 연령의 효과는 성장비에서만 영향을 미쳤고, 공변이로 선형 모형에 포함된 최종 체중 측정시 일령의 효과는 성장비를 제외한 성숙체중과 성숙률에 영향을 미치는 것으로 나타났다. Gompertz 모형, von Bertalanffy 모형 및 Logistic 모형에 의해 개체별로 추정한 모수 A는 가을에 출생한 개체들이 봄에 출생한 개체들에 비해 10.47${\pm}$7.9, 19.01${\pm}$9.79 및 13.43${\pm}$5.94kg 더 무거웠으며 Logistic 모형에서 통계적 유의성(P〈.05)이 있었으며, 성숙률은 봄에 출생한 개체들이 가을에 출생한 개체들에 비해 0.00021${\pm}$0.00009, 0.00022${\pm}$0.00009 및 0.00041${\pm}$0.00013으로 높았고 통계적인 유의성(P〈.05)이 있었다. 어미소 연령 그룹별 성장모수들의 최소자승평균치를 보면 연령이 2세나 3세인 어미소로부터 태어난 암소들은 다른 연령그룹의 어미소로부터 태어난 암소들에 비해 성숙체중은 크지 않으면서 성장비가 크고 성숙률은 작은 경향을 보이고 있는데 성숙체중은 크지 않으면서 성장비가 크다는 것은 생시체중이 작다는 것을 시사한다. 따라서 한우 암소를 1산이나 2산까지만 번식에 이용한 후 비육 출하하는 생산체계를 유지하는 집단에서는 축군의 생시체중이 작아지고 성숙체중도 작아지는 현상이 나타날 우려가 있다. 본 연구에서는 성장곡선 모수에 영향을 미치는 환경요인으로서 출생년도-계절과 어미소 연령을 고정효과로 하고 여기에 최종 체중 측정시 일령의 1차식 효과를 공변이로 추가시켰는데, 분산분석 결과 최종 체중 측정시 일령이 세 가지 성장 모형으로 추정한 성숙체중과 성숙률에 영향을 미치는 것으로 나타났다. 이러한 결과들은 최종 체중 측정시 일령에 따라서 성장특성이 달라질 수 있음을 의미하므로 성장곡선 모형의 연구를 위해서는 최종 체중 측정 시점을 변이요인으로 고려하여야 한다. 그리고 한우의 성장 패턴을 좀더 잘 규명하기 위해서는 2차 이상의 다항회귀식 효과에 대한 검토가 필요하다.

• 한국안전학회지
• /
• 제21권4호
• /
• pp.49-54
• /
• 2006

The evaluation of elastic-plastic fracture characteristic was investigated in ferrite steel SA 516- Gr70 used for reactor coolant piping elbow and support skirt of pressure vessels. This paper describes the effect of temperature on J-R curve characteristic of this material. The elastic-plastic fracture mechanics parameter J is obtained with unloading compliance method. The test method were analyzed according to ASTM E 813-89 and E 1152-89. Unloading compliance $J_{IC}$ tests were performed on 1 CT specimens at varied temperatures from $25^{\circ}C$ to about $400^{\circ}C$ using a high temperature extensometer. At all temperature, valid $J_{IC}$ measurements could be made and $J_{IC}$ decreased with increasing temperature. SEM fractography schematically illustrates microvoid initiation, growth and coalescence at the tip of a preexisting crack.

• 대한기계학회논문집A
• /
• 제28권5호
• /
• pp.640-647
• /
• 2004

In order to perform elastic-plastic fracture mechanical analyses, fracture resistance curves for concerned materials are required. The unloading compliance method and the DCPD(Direct Current Potential Drop) method have been widely used for measuring the crack length and the extension for a standard specimen fracture resistance curve test. However it is difficult to apply the unloading compliance method to a real pipe fracture resistance curve test. The objective of this paper is to propose the calibration equation between the normalized crack length and the normalized electric potential, and to apply to pipe fracture experiments. For these, finite element analyses were performed with various current input locations and crack front configurations. Also the 4-point bending jig was manufactured for a pipe test and the DCPD method was used to measure crack extensions and crack lengths for a pipe test. The calculated crack length by the DCPD method agreed with the measured crack length within 5% error.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 1997년도 특별강연 및 춘계학술발표 개요집
• /
• pp.65-68
• /
• 1997

Fracture behavior of ex-serviced 1Cr-0.5Mo steel was measured at room(24$^{\circ}C$) and elevated(538$^{\circ}C$) temperature and compared with that measured with virgin 1Cr-0.5Mo steel. Compact C(T) specimens were machined from the base and welded test materials. In case of the C(T) specimens of the weld, fatigue precrack was introduced along the fusion line so that a crack growth should occur along the region of heat affected zone. It was observed that the J-R curve of the serviced material was significantly lower than that of the virgin material at room temperature. Brittle fracture was observed in the serviced material. On the other hand at elevated temperature no noticeable difference was found between the J-R curves of the virgin and the serviced material. The measured J-R curves were also compared with those of the 1.25Cr-0.5Mo steel from other literatures. Optical microscopy and SEM examination of the serviced material reveal the carbide in/along the grain boundary which shows material degradation due to long-term usage.

• 대한기계학회논문집A
• /
• 제20권2호
• /
• pp.529-539
• /
• 1996

Fracture resistance(J-R) curves, which are used for elastic-plastic fracture mechanics analyses, are known to be dependent on the specimen geometry. The objective of this paper is to investigate the effect of crack tip constraint an the J-R curves in CT specimens. Fracture toughness tests on CT specimens with varying planform size were performed and test results showed that the J-R curves were increased with an increase in the planform size. Finite element analysis were also performed and the numerical results showed that this experimental phenomenon was probably due to the relaxation of crack tip constraint resulting from the stress triaxiality.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1646-1651
• /
• 2004

This paper has been carried out to find the thermal efficiency and operating characteristics of heatpipe type solar collector using a glass concentric evacuated tube(CETC) during summer. In an experiment the flow rate of water in collector are 1.5l/min. Collector efficiency is $50{\sim}60%$ during time. The solar radiation appeared in a clear day is efficiency high. Efficiency curve fitted first order polynomial show that $F_{R}$$({\tau}{\alpha})$ and $F_{R}U_{L}$=1.316 is 0.601 and 1.316 respectively.

• 한국안전학회지
• /
• 제14권3호
• /
• pp.18-24
• /
• 1999

This paper were performed to evaluate the elastic-plastic fracture toughness $J_IC$ by the unloading compliance method for 1/2 CT specimen of A5083-H112 aluminum alloy. A modified offset method for negative crack growth effect is presented and compared with Voss offset method. We found that the modified offset method presented can be used efficiently for a determination of the stable crack onset. The $J_IC$ by Voss offset method can be overestimated, but the suggested offset method showed a high reliability within 5% of tolerence from the results by the multi-specimen method.