• 한국공작기계학회논문집
• /
• 제13권6호
• /
• pp.23-28
• /
• 2004

Impact behavior of polycarbonate in various defect state was investigated using an instrumented impact tester. A method of analyzing raw impact data was developed and successfully demonshsted the impact behavior in terms of load-displacement and energy-displacement curves. This technique was shown to be capable of separating defect no-defect initiated fractures as well as their propagation behaviors.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 1999년도 춘계학술발표대회 논문집
• /
• pp.1.1-4
• /
• 1999

The toughening mechanism and fracture behavior of rubber/polymer composites were investigated with respect to two factors; (1) the composition ratio of polymers(PPO and PS which have a different chain flexibility) and (ii) the rubber particle size in PPO/PS blend system Izod impact test and fractographic observation of the fracture surface using scanning electron microscope were conducted, Finite element analysis were carried out to gain understanding of plastic deformation(shear yielding and crazing) of these materials.

• 폴리머
• /
• 제25권3호
• /
• pp.435-440
• /
• 2001

본 연구에서는 일방향 탄소/탄소 복합재료에 산화억제제로 사용된 $MoSi_2$의 첨가량에 따른 복합재료의 부착력, 파괴인성 그리고 충격강도와의 관계를 고찰하였다. 산화억제제로 사용한 이규화 몰리브덴 (MoSi$_2$)은 복합재료의 내산화 특성을 향상시키기 위하여 각각 4, 12, 20wt%의 중량비로 페놀수지에 함침시켰다. 본 연구에 있어서 복합재료의 부착력은 접촉각 측정에 의한 Wilhelmy 방정식을 사용하여 계산하였다. 파괴인성과 충격강도는 임계 세기인자 측정을 위한 3점 굴곡 시험 방법과 Izod 충격시험에 의해 각각 측정하였다. 그 결과, $MoSi_2$가 첨가된 탄소/탄소 복합재료의 파괴인성과 충격강도는 증가하였다. 특허 l2wt%의 $MoSi_2$가 첨가된 복합재료가 London dispersive 요소($W_A\;^L$)의 증가에 의한 가장 큰 부착력을 나타내었으며, 이는 복합재료의 각 구성요소간의 계면결합력 증가에 따른 결과라 사료된다.

• The Journal of Advanced Prosthodontics
• /
• 제4권1호
• /
• pp.30-36
• /
• 2012

PURPOSE. The aim of this in-vitro investigation was to describe the effect of reinforcement with different fibers on impact strength of heat polymerized poly-methyl methacrylate (PMMA) denture base resin and to analyze the effect of surface treatment of the fibers on the impact strength. MATERIALS AND METHODS. The specimens were fabricated from the dies formed as per standard ASTM D4812. 2% by weight of glass, polyethylene and polypropylene fibers were incorporated in the PMMA resin. The Izod impact testing was performed on the unnotched specimens and the values obtained were analyzed using appropriate one way ANOVA, followed by unpaired t-test. Fractured ends of the samples were subjected to the SEM analysis. RESULTS. The polypropylene fibers with plasma treatment showed the highest impact strength ($9.229{\times}10^2$ J/m) followed by the plasma treated polyethylene fibers ($9.096{\times}10^2$ J/m), untreated polypropylene fibers ($8.697{\times}10^2$ J/m), untreated polyethylene fibers ($7.580{\times}10^2$ J/m), silane treated glass fibers ($6.448{\times}10^2$ J/m) and untreated glass fibers ($5.764{\times}10^2$ J/m). Also the surface treatment of all the fibers has shown the significant improvement in impact strength. Findings of the SEM analysis justified the improvement in impact strength after surface treatment. CONCLUSION. Reinforcement with the fiber is an effective method to increase the impact strength of PMMA denture base resin. The surface treatment of fibers further increases the impact strength significantly.

• Elastomers and Composites
• /
• 제49권4호
• /
• pp.284-292
• /
• 2014

고분자 소재는 금속 소재에 비해 기계적 강도, 특히 충격강도가 매우 취약하기 때문에 이의 증대를 위해 충격보강제를 이용하는 경우가 많다. 이러한 충격강도는 충격보강제의 함량과 분포에 따라 변화한다. 본 연구에서는 충격보강제가 함유된 나일론 6 시편에 대해서 충격시험을 모사하였고 충격시편 단면에서의 응력분포를 통해 충격강도 증대원리를 관찰하였다. 시편 단면에서 충격보강제의 개수와 분포에 따른 해석을 하여 비교하였다. 충격보강제의 개수가 증가할수록 부피가 감소하는 모델의 경우 놋치 표면의 응력과 주응력의 크기가 점차 높게 나타났다. 충격보강제의 개수가 증가할수록 충격보강제 전체의 총 표면적이 증가하는 모델의 경우에는 응력과 주응력이 점차 높게 관찰되었다.

• 대한기계학회논문집
• /
• 제3권2호
• /
• pp.43-47
• /
• 1979

This paper presents the effect of stress relief annealing on mechanical properties in single Vee-groove welding joint. In this experiment, the investigation of annealing effect on mechanical properties of test material carried out by changing the annealing temperature from $600^{\circ}C$ to $900^{\circ}C$ under the given conditions. The results pbtained by this study are as follows: (1) Under the constant welding conditions, the tensile strength of test welded joint decrease in accordance with the increase of annealing temperature. The experimental results show that the reduction rate of tensile strength is about 35.09% of base metal strength. (2) Microhafdness distribution of welded joint bring about the maximum hardness near the bended line of welding joint. (3) Izod impact energy of welded joint in increase in according to the rise of annealing temperature and the peak energy of impact test occurs at $800^{\circ}C$

• 한국안전학회지
• /
• 제21권1호
• /
• pp.65-71
• /
• 2006

Flame retardancy and mechanical properties of polyolefinic mixed waste plastics/filler composites were investigated by using inorganic flame retardant(magnesium hydroxide) and PUB(polyurethane block) powder generated from cryogenic insulation process. All composites were obtained by extrusion and after compression molding. The effect of PUB powder on the properties of the composites was studied by tensile and izod impact test, morphology studies and flammability as LOI and UL94 vertical burning test and smoke density. The objective of this work is to obtain good mechanical properties from recycled PP composites with $Mg(OH)_{2}/PUB$ powder as fillers and optimum cost-performance balance, in addition to flame retardant characteristics.

• 대한치과기공학회지
• /
• 제21권1호
• /
• pp.55-65
• /
• 1999

So far, I Conducted an examination with focus on the type, characteristic, and test methods of impact test. which is a type of mechanical that evaluate materials. As mentioned previously, in testing soldering strength of soldering is the load when the object under experiment is broken down with the result of flexibility test or peel test. In this method, a hevay load is necessary until alloy of parent metal is bended, if the alloy of the parent metal has a large mechanical quality(peel strength or resisting power). Once the alloy of the parent metal is bended, however, it tends to come into pieces abruply form the part where soldered. Therefore, a metal has a high breakdown value if the degree of strength of its parent metal is high even if the result of measurement indicates otherwise. Thus, the result of the test did not correspond to the clinical result. Therefore, this study concludes as the following from a test of strength of soldering by mean of conducting an impact test, which is a type of mechanical evaluation methods : 1. Among various impact tests, a charpy thpe is more appropriate than the izod type in testing strength of soldering. 2. As far as test piece is concerned, to use subsized impact test piece is appropriate in the impact test in that it does not have notch. 3. In the matter of analysis, it is appropriate to measure absorbing energy which results from rupture of test piece.

• Elastomers and Composites
• /
• 제50권1호
• /
• pp.49-54
• /
• 2015

Dynamically vulcanized PMMA/ACM (80 wt%/20 wt%) blend using DCP as a curing agent was prepared using internal mixer. The morphology, mechanical properties, optical properties, melt viscosity and die swell were characterized by using FE-SEM, tensile test, Izod impact test, dynamic mechanical analysis, ARES and capillary rheometer, respectively. The blends show a phase-separated morphology in which ACM are dispersed in PMMA matrix. Dynamically vulcanized blend exhibits higher mechanical properties, higher melt viscosity, and die swell as compared to simple blend. And, the dynamically vulcanized blend showed total transmittance of more than 75% and haze of higher than 90%, which enable it to find potential applications to fabricate an optical diffuser by extrusion process.

• 자원리싸이클링
• /
• 제17권3호
• /
• pp.10-20
• /
• 2008

농업용 폐비닐의 재활용에 대한 무기충진재의 거동을 연구하기 위하여 한국환경자원공사 시화 및 정읍공장에서 세척된 PE fluff들을 각각 사용하였다. 먼저 PE 플러프에 무기충진재인 탄산칼슘과 칼펫을 배합비율별로 혼합하여 용융 압출을 통한 시험용 펠렛들을 제조한 후 프레스 몰딩을 거쳐 시료별로 시험용 시트들을 제작하였다. 이들 무기충진 복합재의 기계적 특성인 인장, 굴곡, Izod 충격시험을 실시하였고, 열적 특성인 열변형온도, vicat 연화온도, 용융흐름지수(MFI)를 시험 및 분석을 하였다. 또한 플라스틱 내부에서 무기충진재의 분산성 및 wetting정도를 확인하기 위하여 SEM을 통해 모폴로지를 조사하였다. 이들 결과로부터 물리적인 측면과 경제적인 관점에서 재생 PE와 무기충진재의 최적 배합비들을 얻었다.