• Journal of Communications and Networks
• /
• 제11권6호
• /
• pp.607-614
• /
• 2009

Recently, Lu et al. proposed an efficient conditional privacy preservation protocol, named ECPP, based on group signature scheme for generating anonymous certificates from roadside units (RSUs). However, ECPP does not provide unlinkability and traceability when multiple RSUs are compromised. In this paper, we make up for the limitations and propose a robust and efficient anonymous authentication protocol without loss of efficiency as compared with ECPP. Furthermore, in the proposed protocol, RSUs can issue multiple anonymous certificates to an OBU to alleviate system overheads for mutual authentication between OBUs and RSUs. In order to achieve these goals, we consider a universal re-encryption scheme and identity-based key establishment scheme as our building blocks. Several simulations are conducted to verify the efficiency and effectiveness of the proposed protocol by comparing with those of the existing ECPP.

• 한국정밀공학회지
• /
• 제28권8호
• /
• pp.936-941
• /
• 2011

This paper deals with the issue of motion control of a single rod cylinder-load system using simple adaptive control (SAC) method. Prior to controller design, the experiment of open-loop response has been performed. Based on it, design parameters of transfer function are obtained and used for controller design. The effect of parallel feedforward compensator has been investigated by computer simulation, suppressing the oscillatory motion. Through experiments it is conformed that the SAC method gives good tracking performance compared to the PD control method.

• 소음진동
• /
• 제8권3호
• /
• pp.533-541
• /
• 1998

Recently, optical disk drives are increasingly demanded to have higher speed as well as high information density, especially for applications like CD ROM drives. To this end, improvement of their optical pickup structure and control is recognized the very challenging issue. In this paper, the pickup is first analytically modelled in a plane to describe its coupled auto-focusing and auto-tracking motions. Subsequently, the model is linearized and combined with actuator dynamics for the auto-focusing system. With its unmeasurable parameters being estimated based on experimental data, an approximate I-DOF linear model is obtained neglecting the coupling term. To design the high speed and robust positional servo controller realistic design specifications are addressed, and H control method is employed based on the approximate model. Finally, taking the pickup in a commerical high speed CD ROM drive as an example performance of the designed controller is verified through realtime experiments.

• 한국전산유체공학회지
• /
• 제14권3호
• /
• pp.63-68
• /
• 2009

The motion of a rising liquid droplet is different that of a bubble motion. Treatment of liquid drops is more complex because internal motion must be considered. A 3D unstructured CFD code has been developed to solve incompressible N-S equation for the droplet simulation. This front-tracking consideration which the interface is tracked explicitly is very available to apply for not only exact interface topology but also the high schmidt number issue, such as $CO_2$ dissolution. This paper is forced on the zig-zag motion of the liquid droplet. The simulation shows that if the rising droplet is located at the corner of the zig-zag path, the velocity is low and shape of the droplet is more spherical shape, results in the less drag coefficient. Twin horse shoe vortexes behind the rising droplet are presented and the topology of the droplet is compared with an experimental result during one period of the path.

• 드라이브 ㆍ 컨트롤
• /
• 제12권2호
• /
• pp.14-20
• /
• 2015

This paper focuses on the issue of force synchronizing control for the injection servomechanism of injection molding machines. Prior to the controller design, a virtual design model was developed for the injection mechanism with an AC servomotor-ball screw. A synchronizing controller is designed and combined with the PID control to accommodate the mismatches between the real plant and the linear model plant used. Due to the plant uncertainty, the stiffness and the damping of the mechanism were considered. From the tracking control simulations based on the virtual design model, it is shown that a significant reduction in force synchronizing error is achieved through the use of a proposed control scheme.

• 한국정밀공학회지
• /
• 제27권9호
• /
• pp.26-33
• /
• 2010

A multi-MW wind turbine is a huge mechanical structure, of which the rotor diameter is more or less than 100 m. Rotor blades experience unsymmetric mechanical loads caused by the interaction of incoming wind with the tower and wind shear effect. These mechanical loads are transferred to the entire structure of the wind turbine and are known as the major reasons for shortening the life span of the wind turbine. Therefore, as the size of wind turbine gets bigger, the mitigation of mechanical loads becomes more important issue in wind turbine control system design. In this paper, a concept of an individual pitch control(IPC), which minimizes the mechanical loads of rotor blades, is introduced, and simulation results using IPC are discussed.

• 한국시뮬레이션학회논문지
• /
• 제10권2호
• /
• pp.47-60
• /
• 2001

In mobile wireless network efficient location management for tracking and finding mobile users is a critical issue. The traffic for location update can be excessive, especially at the base stations that are near to the location area (LA) boundaries. In this paper we propose a new location update scheme which can significantly reduce the signaling traffic for location update. It is based on the virtual layer approach employing SubMSCs. The virtual layer is laid upon the original layer of LAs such that the mobile terminals moving around the boundary cells of adjacent LAs become to move within a virtual LA. As a result, the location update traffic is substantially reduced compared to overlapping scheme which is the most recent and efficient location update scheme.

• 한국ITS학회:학술대회논문집
• /
• 한국ITS학회 2005년도 제4회 추계학술대회 및 정기총회
• /
• pp.83-88
• /
• 2005

A transportation problem in Korea is a serious issue that has to be solved urgently in the motor era of 15 million vehicles. Recently ITS has been introduced to improve efficiency of the current roads because an excessive budget and a long term construction are needed to build new roads. Therefore the government enacted the law as of ITS and the in architecture. However, these ITS information services were oriented to mainly vehicles and drivers, not public entities such as bus driver, passengers and so on. Nowadays lots of local autonomous city introduced a public transportation information system (PTIS), and providing useful information for the public. For this PTIS, important design issues are to be focused on detecting and tracking technology of moving bus, and a wireless communication link to transmit the location information. This paper presents design models using several wireless communication methods, and an implementation case using a Wireless packet Data communication Network (WDN) to transmit bus location information at Seoul, Korea.

• 유공압시스템학회:학술대회논문집
• /
• 유공압시스템학회 2010년도 춘계학술대회
• /
• pp.81-85
• /
• 2010

This paper deals with the issue of motion control of a single rod cylinder-load system using simple adaptive control (SAC) method. Prior to controller design, the experiment of open-loop response has been performed. Based on it, design parameters of transfer function are obtained. The effect of parallel feedforward compensator has been investigated by computer simulation, suppressing the oscillatory motion. Through experiments it is conformed that the SAC method gives good tracking performance compared to the PD control method.

• 산업공학
• /
• 제10권3호
• /
• pp.145-153
• /
• 1997

This paper deals with constructing a scheduling system for a mold manufacturing factory. The scheduling system is composed of 4 submodules such as pre-processor, neural network training, neural networks and simulation. Pre-processor analyzes the condition of workshop and generates input data to neural networks. Network training module is performed by using the condition of workshop, performance measures, and dispatching rules. Neural networks module presents the most optimized dispatching rule, based on previous training data according to the current condition of workshop. Simulation module predicts the earliest completion date of a mold by forward scheduling with the presented dispatching rules, and suggests a possible issue date of a material by backward tracking. The system developed shows a great potential when applied in real mold factory for automotive parts.