• Journal of Ship and Ocean Technology
• /
• v.10 no.2
• /
• pp.11-23
• /
• 2006

The model exchange from CAD system to CAE system in valid and effective manner is the major issue of automatic analysis modelling of ship structure. However, model exchange approaches based on the neutral CAD file have resulted in invalid model exchange that could not properly reflect the characteristics of CAD model and CAE model of ship structure. This paper presents the new approach of n-to-n mapping to exchange ship structure model in heterogeneous CAD/CAE environments. In this study, the common model called 'unified ship model for analysis' to directly extract proper information from different CAD systems for ship structural analysis is proposed. Moreover, a command language based model interfacing technique to construct an idealized model for analysis job is also proposed. The proposed approach has been actually implemented in DSME CAD/CAE environment of ship structure such as TRIBON system, PATRAN system and FLUENT system. The applicability and effectiveness of the proposed approach was verified by applying it to the real analysis project for fore-body of ship and block lifting. This application results show that the proposed approach can be effectively used for heterogeneous CAD/CAE environment.

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10b
• /
• pp.124-129
• /
• 1992

The goal of the proposed Intelligent Assisting System - IAS is to assist human operators in an intelligent way, while leaving decision and goal planning instances for the human. To realize the IAS the very important issue of manipulation skill identification and analysis has to be solved, which then is stored in a Skill Data Base. Using this data base the IAS is able to perform complex manipulations on the motion control level and to assist the human operator flexibly. We propose a model for manipulation skill based on the dynamics of the grip transformation matrix, which describes the dynamic transformation between object space and finger joint space. Interaction with a virtual world simulator allows the calculation and feedback of appropriate forces through controlled actuators of the sensor glove with 10 degrees-of-freedom. To solve the sensor glove calibration problem, we learn the nonlinear calibration mapping by an artificial neural network(ANN). In this paper we also describe the experimental system setup of the skill acquisition and transfer system as a first approach to the IAS. Some simple manipulation examples and simulation results show the feasibility of the proposed manipulation skill model.

• Proceedings of the Korean Society for Cognitive Science Conference
• /
• 2000.05a
• /
• pp.322-328
• /
• 2000

This study discusses cognition as a computable mapping in cognitive system and relates G del's Incompleteness Theorems to the computability of cognition from a metamathematical perspective. Understanding cognition as a from of computation requires not only Turing machine models but also neural network models. In previous studies of computation by cognitive systems, it is remarkable to note how little serious attention has been given to the issue of computation by neural networks with respect to G del's Incompleteness Theorems. To address this problem, first, we introduce a definition of cognition and cognitive science. Second, we deal with G del's view of computability, incompleteness and speed-up theorems, and then we interpret G del's disjunction on the mind and the machine. Third, we discuss cognition as a Turing computable function and its relation to G del's incompleteness. Finally, we investigate cognition as a neural computable function and its relation to G del's incompleteness. The results show that a second-order representing system can be implemented by a finite recurrent neural network. Hence one cannot prove the consistency of such neural networks in terms of first-order theories. Neural computability, theoretically, is beyond the computational incompleteness of Turing machines. If cognition is a neural computable function, then G del's incompleteness result does not limit the compytational capability of cognition in humans or in artifacts.

• Proceedings of the KSRS Conference
• /
• 1998.09a
• /
• pp.325-330
• /
• 1998

The first Korean remote sensing satellite, Korea Multi-Purpose Satellite (KOMPSAT-1), is going to be launched in 1999. This will carry a 7m resolution Electro-Optical Camera (EOC) for earth observation. The primary mission of the KOMPSAT-1 is to acquire stereo imagery over the Korean peninsular for the generation of 1:25,000 cartographic maps. For this mission, research is being carried out to assess the possibilities of automated or semi-automated mapping of EOC data and to develop, if necessary, such enabling tools. This paper discusses the issue of automated DEM generation from EOC data and identifies some important aspects in developing a for DEM generation system from EOC data. This paper also presents the current status of the development work for such a system. The development work has focused on sensor modelling, stereo matching and DEM interpolation techniques. The performance of the system is shown with a SPOT stereo pair. A DEM generated from a commercial software is also presented for comparison. The paper concludes that the proposed system creates preferable results to the commercial software and suggests future developments for successful generation of DEM for EOC data.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.6
• /
• pp.1461-1470
• /
• 1998

Bit allocation or quantizer assigning problem is a basic and essential issue in lossy picture coding. It could be represented as minimizing overall distortion with the given constraint that total bits should not exceed allowed bit-budget. Optimal solution can be found by Lagrangian method. However this method needs much computational time and memory. This paper presents an approximation method that uses the activity measure. The comparison between the existing activity measuring techniques are made, and mapping function from activity value to the quantizer is proposed. Under MPEG-1 Intra coding situation, simulations show almost identical results compared to the optimal ones obtained by Lagrangian method with reduced computational time.

• Journal of Power System Engineering
• /
• v.20 no.5
• /
• pp.37-45
• /
• 2016

Exhaust gas recirculation has the advantage of being low-cost and easy to control of NOx emission. Therefore, it is most generally used to reduce NOx emission according to strengthen regulation. In the case of a non-road engine, such as the agricultural engine, since it mainly operate a middle or high-load state, NOx emission is decreased in accordance with the mapping range of the EGR rate, but results in an increase in the particulate matter which is caused to deposit and fouling problem of the EGR system. This problem has become an important issue for maintaining the performance of the engine, as well as emission performance. This study had examined the effects of cooler aging on the performance of heat transfer efficiency and NOx emission in non-road diesel engine. As a result of the EGR cooler aging during 200 hours engine operation, the cooling performance decreased about 25% compared with that of fresh cooler and the NOx emission increased about 14.6% on NRSC(non-road steady cycle) and 20% on NRTC(non-road transient cycle) compared with that of fresh cooler respectively.

• Asian Journal of Innovation and Policy
• /
• v.3 no.1
• /
• pp.50-71
• /
• 2014

This paper is an attempt to understand the external technology acquisition (ETA) process of the machinery SME sector in Bangalore city, India. With the onset of economic liberalization, Bangalore based machinery SMEs have significantly shifted their ETAs from India to abroad, particularly Germany and Japan, among others. The primary objective of ETAs is to enhance their competitiveness by means of improving product quality and productivity as well as meeting customer demand. Replacing outdated machinery or overcoming technological obsolescence is a primary objective of only a few. As a result, majority of the SMEs has gone for multiple ETAs since their inception and we found a statistically significant positive correlation between firm age and number of ETAs. The present study has made two empirical contributions: (i) We have thrown light on the core technology up-gradation issue - How do SMEs approach the problem of external technology acquisition in the current globalization era? (ii) We are able to identify and develop a map of ETA process based on the "learning and experiences" of these SMEs.

• Advances in aircraft and spacecraft science
• /
• v.1 no.2
• /
• pp.125-143
• /
• 2014

This paper provides a new technique for solving the static analysis of arbitrarily shaped composite plates by using Strong Formulation Finite Element Method (SFEM). Several papers in literature by the authors have presented the proposed technique as an extension of the classic Generalized Differential Quadrature (GDQ) procedure. The present methodology joins the high accuracy of the strong formulation with the versatility of the well-known Finite Element Method (FEM). The continuity conditions among the elements is carried out by the compatibility or continuity conditions. The mapping technique is used to transform both the governing differential equations and the compatibility conditions between two adjacent sub-domains into the regular master element in the computational space. The numerical implementation of the global algebraic system obtained by the technique at issue is easy and straightforward. The main novelty of this paper is the application of the stress and strain recovery once the displacement parameters are evaluated. Computer investigations concerning a large number of composite plates have been carried out. SFEM results are compared with those presented in literature and a perfect agreement is observed.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.12
• /
• pp.1899-1904
• /
• 2017

This paper presents a new one-time password approach generated based on $4{\times}4$ pattern schedule. It demonstrates generation of passkey from initial seed of random codes and mapping out in table pattern schedule which will produce a new form of OTP scheme in protecting information or data. The OTP-2FA has been recognized by many organizations as a landmark to authentication techniques. OTP is the solution to the shortcomings of the traditional user name/password authentication. With the application of OTP, some have benefited already while others have had second thoughts because of some considerations like cryptographic issue. This paper presents a new method of algorithmic approach based on table schedule (grid authentication). The generation of OTP will be based on the random parameters that will be mapped out in rows and columns allowing the user to form the XY values to get the appropriate values. The algorithm will capture the values and extract the predefined characters that produce the OTP codes. This scheme can work in any information verification system to enhance the security, trust and confidence of the user.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2018.10a
• /
• pp.133-135
• /
• 2018

In these days, providing flexible and personalized network services subject to customers' requirements becomes an interesting issue for network service providers. Moreover, because each network service provider own finite network resources and infrastructure, dynamic network provisioning is essential to leverage the limited network resources efficiently and effectively for supporting personalized network services. Recently, as the population of mobile devices increases, the location-awareness becomes as important as the QoS-awareness to provision a network service dynamically. In this paper, we propose a framework for providing location-aware dynamic network services. This framework includes the web user interface for obtaining customers' requirements such as locations and QoS, the network generator for mapping the requested locations and network infrastructure, the network path calculator for selecting routes to meet the requested QoS and the network controller for deploying a prepared network services into SDN(Software-Defined Networking) enabled network infrastructure.