• 한국지반공학회지:지반
• /
• 제10권3호
• /
• pp.111-118
• /
• 1994

A series of drained cubical triaxial tests was performed to investigate the finfluence of the intermediate principal stress on the deformation and strength characteristics of sand. Test results showed that the strength of sand as represented by the friction angle increased from triaxial compression condition (b:0) with increasing magnitude of the intermediate principal stress until the vus of b reached 0.75, land it decreased slightly with closing to b= 1. Also it was found that the projection of the plastic strain increment vector on the octahedral plane was perpendicular to the trace of the failure surface on that plane. The prediction by the isotropic single hardening model sllowed good coinidence with experimental results.

• Steel and Composite Structures
• /
• 제17권2호
• /
• pp.185-198
• /
• 2014

Carbon-manganese steel A42 (French standards) is used in steam generator pipes of nuclear center and subject to low cycle fatigue (LCF) loads. In order to obtain the material LCF behavior, the tests are implemented in a hydraulic fatigue machine. The LCF plastic deformation and cyclic stress in macroscope have been influenced by the accumulated low cycle fatigue damage. The constitutive kinematic and isotropic hardening modeling is modified with coupling fatigue damage to describe the fatigue behavior. The improved model seems to be good agreement with the test results.

• 소성∙가공
• /
• 제7권6호
• /
• pp.594-602
• /
• 1998

The design analysis of axisymmetric, multi-stage deep drawing dies was performed using the rigid-viscoplastic finite element formulation. In the formulation the axisymmetric CFS algorithm was employed. Hill's non-quadratic normal anisotropic yield criterion and isotropic hardening rule were considered. For trial initial displacements and tool contact points. the geometric force equilibrium method was adopted. In order to see the validity of the formulation, the multi-stage deep drawing processes of shell-cylinder front part of hydraulic booster were simulated. The simulation showed good agreements with measurments and PAM-STAMP results.

• Coupled systems mechanics
• /
• 제11권2호
• /
• pp.133-149
• /
• 2022

The accurate prediction of elastoplasticity under prescribed workloads is essential in the optimization of engineering structures. Mechanical experiments are carried out with the goal of obtaining reliable sets of material parameters for a chosen constitutive law via inverse identification. In this work, two sample geometries made of high strength steel plates were evaluated to determine the optimal configuration for the identification of Ludwik's nonlinear isotropic hardening law. Finite element model updating(FEMU) was used to calibrate the material parameters. FEMU computes the parameter changes based on the Hessian matrix, and the sensitivity fields that report changes of computed fields with respect to material parameter changes. A sensitivity analysis was performed to determine the influence of the sample geometry on parameter identifiability. It was concluded that the sample with thinned gauge region with a large curvature radius provided more reliable material parameters.

• 한국산업융합학회 논문집
• /
• 제15권1호
• /
• pp.21-27
• /
• 2012

Decomposed granite soils are in a wide range of conditions depending on the degrees of weathering. This paper is intended to examine laboratory tests such as consolidation tests and conventional triaxial compression tests conducted in order to find out the mechanical properties of Cheongju granite soil. Along with the foregoing, the results of basic physical tests conducted in order to grasp the physical properties of Cheongju granite soil were described and based on the results, methods to calculate the mechanical parameters of numerical approaches using Lade's double surface work-hardening constitutive model were examined. Finally, it is intended to explain the stress properties of Cheongju granite soil used as a geotechnical material based on its shear behavior and critical state concept using the results of isotropic consolidation tests and triaxial compression tests. As a conclusion, it can be seen that in the relationship between confining stress and maximum deviator stress, the slope is maintained at a constant value of 2.95. In the drained CTC test, maximum deviator stress generally existed in a range of axial strain of 6~8% and larger dilatancy phenomena appeared when confining stress was smaller. Finally, based on the results of the CTC tests on Cheongju granite soil, although axial strain, deviator stress and pore water pressure showed mechanical properties similar to those of overconsolidated soil, Cheongju granite soil showed behavior similar to that of normally consolidated soil in terms of volumetric strain.

• 비파괴검사학회지
• /
• 제20권6호
• /
• pp.545-554
• /
• 2000

충격에 의해 복합 재료 내에 발생하는 층간 박리를 정량적으로 평가하기 위한 비파괴 방법중에서 Compton X-ray 역산란 기술은 초음파에 비해 비접촉식이며 박리 층간의 상호간섭이 없어 복합재료 판면의 박리 층의 위치와 크기를 검사하는데 효과적인 방법으로 사용되어 왔다. 그러나 X-ray역산란 기술에 있어서 복합재료의 박리 층과 같은 미세한 결함의 측정을 위해 측정 정도를 높이면 역산란 양의 감소로 인해 신호 대 잡음 비(SNR)가 급격히 감소하여 결함검출 가능성이 크게 저하된다. 본 논문에서는 복합재료의 특성을 고려한 X-ray 역산란 모델을 기초로 적응필터를 사용하여 결함신호를 비선형 감쇄, 빔 경화(X-ray hardening), 비균질 특성과 같은 잡음 신호로부터 분리, 추출하는 방법을 제시하였다. 이렇게 분리된 결함신호로부터 정량적인 결함(박리)의 위치와 크기를 수학적 산란 모델과의 비교를 통해 최소 자승법을 이용하여 결정하였다.

• Structural Engineering and Mechanics
• /
• 제32권5호
• /
• pp.649-665
• /
• 2009

This paper reports part of a comprehensive research study conducted at the University of Queensland on the ability of CFRP web-bonded systems in strengthening an exterior beam-column joint subjected to monotonic loads. One 1/2.2 scaled plain and four CFRP repaired/retrofitted joints subjected to monotonic loads were analysed using the nonlinear finite-element program ANSYS and the results were calibrated against experiments. The ANSYS model was employed in order to account for tension stiffening in concrete after cracking and a modified version of the Hognestad's model was used to model the concrete compressive strength. The stress-strain properties of main steel bars were modelled using multilinear isotropic hardening model and the FRPs were modelled as anisotropic materials. A perfect bond was assumed as nodes were shared between adjacent elements irrespective of their type. Good agreement between the numerical predictions and the experimental observation of the failure mechanisms for all specimens were observed. Closeness of these results proved that the numerical analysis can be used by design engineers for the analysis of web-bonded FRP strengthened beam-column joints with confidence.

• Tribology and Lubricants
• /
• 제28권1호
• /
• pp.19-26
• /
• 2012

Rolling contact fatigue of an urban railway wheel was analysed during its rolling. A FEM analysis was performed using a 3D modelling of rail and wheel, considering the slope of the rail and nonlinear isotropic and kinematic hardening behavior of the rail and the wheel. The maximum von-Mises stress and contact pressure between the rail and wheel were 656.9 MPa and 1111.4 MPa, respectively, under axial load of 85 kN with friction coefficient of 0. The fatigue initiation life prediction relationships by strain-lifetime (${\varepsilon}$-N) and Smith-Watson-Topper method were drawn for the wheel steel as follows: $N_i=7.35{\times}10^6{\times}SWT^{-3.56}$ and $N_i=5.41{\times}10^{-9}{\times}(\frac{{\Delta}{\varepsilon}}{2})^{-5.77}$. The fatigue lifetimes of the wheel due to rolling contact were determined to be infinite by ${\varepsilon}$-N and SWT methods.

• 한국안전학회지
• /
• 제19권4호
• /
• pp.135-140
• /
• 2004

마모구조는 대략적으로 기계, 화학 및 열적 마모 등으로 구분되어 진다. 평면변형 유한요소법이 지속적인 칩 형성을 갖는 대각선 가공을 시뮬레이션 하기 위하여 새로운 재료의 응력 및 온도 필드와 같이 사용되었다. 작업소재의 변형은 등방성 변형 경화를 갖는 탄성-점소으으로 취급되며, 수치해석의 해는 소성 변형과 온도 필드의 결합을 설명하며, 온도 종속적인 재료 물성치로 취급된다. 이 논문에서 개발된 모델에서는 전단영역 주위의 변형률, 응력 및 온도 분포에 대한 구성모델의 불확실성의 영향들을 보여주며 예측된 전단영역의 응력, 변형률 및 온도의 평균값들은 기존의 실험 치와 비교해서 잘 맞는 것으로 사료된다.

• 한국강구조학회 논문집
• /
• 제12권1호통권44호
• /
• pp.29-43
• /
• 2000

본 연구에서는 비탄성 부재들의 좌굴 강도를 결정하기 위한 계산적으로 효율적인 비탄성 좌굴해석 프로그램이 개발되었다. 본 프로그램은 휨 좌굴, 휨-비틂 좌굴 혹은 국부좌굴에 의해 붕괴되는 탄성과 비탄성 부재들의 좌굴 강도 및 형상을 결정할 수 있다. 일축 대칭이나 2축 대칭인 I 형 부재를 해석할 수 있다. 복부판은 판 요소를 이용하여 모델되고, 플랜지는 보 요소로 모델되었다. 재료의 비탄성 응력-변형률 관계를 모사하기 위하여 다선형 등방경화 법칙과 증분이론이 사용되었다. 프로그램은 이론치와 실험값들을 이용하여 입증되었다. 프로그램의 결과는 이론치 및 실험값들과 잘 일치였다.