• 청정기술
• /
• 제15권4호
• /
• pp.265-272
• /
• 2009

본 연구에서는 하수슬러지에서 만든 활성탄을 이용하여 벤젠에 대한 정지(static)흡착실험을 수행하였다. 7.999 kPa에 이르는 압력 범위 내에서 온도 조건을 변화시켜 가며 303.15, 318.15, 333.15 K에서 흡착실험을 진행하였다. 등온흡착곡선은 Langmuir isotherm, Freundlich isotherm, Toth isotherm을 적용하여 비교하였다. 벤젠의 흡착량(q)을 fitting한 결과 Langmuir isotherm과 Toth isotherm으로 fitting한 등온흡착 곡선의 정확도가 높은 것으로 나타났다. 그리고 Langmuir isotherm의 $q_{max}$ 값을 이용하여 흡착제의 흡착량을 비교하였다. 또한, 하수슬러지 활성탄과 상용활성탄의 세공 발달 여부를 비교하기 위해 SEM image를 관찰하였다. SEM image 관찰 결과, 국내외 상용활성탄(DARCO A.C., SPG-100 A.C.)이 하수슬러지 활성탄에 비해 세공발달 정도가 우수하며, 세공발달 정도가 우수한 국내외 상용활성탄(DARCO A.C., SPG-100 A.C.)이 하수슬러지 활성탄에 비해 벤젠흡착량(q)이 높은 것을 확인할 수 있었다. 그러나 실온조건인 303.15K에서 하수슬러지의 최대 벤젠흡착량($q_{max}$)은 국내 상용활성탄(SPG-100 A.C.)의 최대 벤젠흡착량($q_{max}$)과 대등한 수치로 나타났으므로 하수슬러지 활성탄의 상용화 가능성을 검증할 수 있었다.

• 청정기술
• /
• 제9권4호
• /
• pp.153-161
• /
• 2003

벤젠과 톨루엔을 활성탄에 흡착하는 공정을 개발하기 위한 기초 실험을 수행하였다. 정적흡착실험은 온도와 압력의 변화에 따른 벤젠과 톨루엔의 흡착특성을 연구하였다. 흡착제로는 활성탄 12~20mesh와 20~40mesh를 사용하였으며 흡착질로는 벤젠, 톨루엔, 질소를 사용하였다. 실험결과는 Langmuir isotherm으로 fittimg하였고, 온도의존성을 계산하였고, 흡착열과 흡착상수를 얻었다. 이성분 정적흡착실험에서는 Langmuir isotherm parameter들이 Extended Langmuir isotherm에 일반적으로 적용할 수 있는 지를 확인하였다. 이때 사용한 실험기법은 기존의 방법에서처럼 흡착 전후의 기상의 몰분율을 측정하여 실험하는 방법이 아닌 압력변화반을 측정하는 정용적법에 기초한 방법을 사용하였다. 동적흡착실험올 수행하여 실험결과를 전사모사로부터 얻어진 결과와 비교하였다. 본 연구에서는 공정에서 흡착조건을 결정할 수 있는 기본 데이터를 획득할 수 있었다.

• 한국수산과학회지
• /
• 제30권6호
• /
• pp.936-943
• /
• 1997

Biosorbents of nonliving, dried marine brown algae Undaria pinnatifida, Hizikia fusiformis, and Sargassum fulvellum were investigated for their lead biosorption performances. As the amount of biosorbent added was increased, the lead removal by biosorbent materials increased but the lead biosorption capacities decreased. However the lead biosorption capacity by the biosorbent materials increased with increasing initial lead concentration and pH in the range of $C_o\;10\~500\;mg/L$. Among the biosorbent materials used in this study, the lead biosorption capacity in the solutions with no pH adjustment decreased in the following sequence: U. pinnatifida > H. fusiformis > S. fulvellum. Equilibrium parameters based on Langmuir and Freundlich isotherm were determined. It was found that the lead biosorption by biosorbent materials were expressed by the Langmuir isotherm better than the Freundlich isotherm.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.537-540
• /
• 2006

Over the past few decades, a considerable number of studies on the durability of concrete have been carried out extensively. A lot of improvements have been achieved especially in modeling of ionic flows. However, the majority of these researches have not dealt with the chloride binding isotherm based on the mechanism, although chloride binding capacity can significantly impact on the total service life of concrete under marine environment. The purpose of this study is to develop the model of chloride binding isotherm based on the individual mechanism. It is well known that chlorides ions in concrete can be present; free chlorides dissolved in the pore solution, chemical bound chlorides reacted with the hydration compounds of cement, and physical bound attracted to the surface of C-S-H grains. First, sub-model for water soluble chloride content is suggested as a function of pore solution and degree of saturation. Second, chemical model is suggested separately to estimate the response of binding capacity due to C-S-H and Friedel's salt. Finally, physical bound chloride content is estimated to consider a surface area of C-S-H nano-grains and the distance limited by the Van der Waals force. The new model of chloride binding isotherm suggested in this study is based on their intrinsic binding mechanisms and hydration reaction of concrete. Accordingly, it is possible to characterize chloride binding isotherm at the arbitrary stage of hydration time and arbitrary location from the surface of concrete. Comparative study with experimental data of published literature is accomplished to validity this model.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제11권1호
• /
• pp.61-66
• /
• 2006

The simple Langmuir isotherm is frequently employed to describe the equilibrium behavior of protein adsorption on a wide variety of adsorbents. The two adjustable parameters of the Langmuir isotherm - the saturation capacity, or $q_m$, and the dissociation constant, $K_d$ - are usually estimated by fitting the isotherm equation to the equilibrium data acquired from batch equilibration experiments. In this study, we have evaluated the possibility of estimating $q_m$ and $K_d$ for the adsorption of bovine serum albumin to a cation exchanger using batch kinetic data. A rate model predicated on the kinetic form of the Langmuir isotherm, with three adjustable parameters ($q_m,\;K_d$, and a rate constant), was fitted to a single kinetic profile. The value of $q_m$ determined as the result of this approach was quantitatively consistent with the $q_m$ value derived from the traditional batch equilibrium data. However, the $K_d$ value could not be retrieved from the kinetic profile, as the model fit proved insensitive to this parameter. Sensitivity analysis provided significant insight into the identifiability of the three model parameters.

• 청정기술
• /
• 제19권4호
• /
• pp.430-436
• /
• 2013

본 연구에서는 국내에서 대표적으로 버려지는 폐벌목 중 잣나무에서 만든 활성탄을 이용하여 벤젠에 대한 정지(static)흡착 실험을 수행하였다. 7.999 kPa에 이르는 압력 범위 내에서 온도 조건을 변화시켜 가며 303.15, 318.15, 333.15 K에서 흡착실험을 진행하였다. 등온흡착곡선은 Langmuir 등온흡착식, Freundlich 등온흡착식, Toth 등온흡착식을 적용하여 비교하였다. 벤젠의 흡착량(q)을 측정한 결과 Langmuir 등온흡착식과 Toth 등온흡착식으로 적용한 등온흡착곡선의 정확도가 높은 것으로 나타났다. 그리고 Langmuir 등온흡착식의 $q_{max}$ 값을 이용하여 흡착제의 흡착량을 비교하였다. 또한, 폐벌목 활성탄과 상용활성탄의 세공 발달 여부를 비교하기 위해 주사전자현미경(scanning electron microscopy, SEM) 사진을 관찰하였다. SEM 사진 관찰 결과, 폐벌목 활성탄이 국내 외 상용활성탄(DARCO A.C., SPG-100 A.C.)에 비해 세공발달 정도가 우수하며, 벤젠흡착량(q)이 높은 것을 확인할 수 있었다. 본 연구 결과를 통해 폐벌목 활성탄의 상용화 가능성을 검증할 수 있었다.

• 한국환경과학회지
• /
• 제6권5호
• /
• pp.531-539
• /
• 1997

Lead sorption performances by biomass of nonliving, dried marine brown algae Undaria phnaunda, Hlzikia hsyormls. and Sugassum fulvellum used as biosorbent materials were investigated. As the amount of biosorbent materials added was increased, the lead removal by biosorbent materials Increased but the lead biosorption capacities decreased. However, with increasing Initial lead concentration the lead biosorption capacities by the biosorbent materials Increased but lead removal efficiencies decreased. In the range of Initial lead concentration(Co) 10-500 mg/L the lead biosorption capacities and removal efficiencies by the biosorbent materials Increased with increasing pH. Among the biosorbent materials used in this study, the lead biosorption capacities decreased in the following sequence: U. plilnaunda > H. fusiformis > S. fulvellum. The lead biosorption by biosorbent materials were expressed by the Langmuir Isotherm better than the Freundlich Isotherm. The biosorption rate could be expressed by the first order reaction rate equation for initial lead concentration like that rad : 0.288Co for U. phanda, rad = 0.255Co for H. fusiformis, and rad : 0.161Co for S. fulvellum. Key words : Lead, biosorption, biosorbent, Undaria pinnatinda, Hiztkia fusiformis, Sargassum fulvellum, Langmuir isotherm, Freundlich isotherm, biosorption rate.

• Advances in environmental research
• /
• 제7권1호
• /
• pp.29-37
• /
• 2018

A simple mathematical model for predicting fixed bed adsorption dynamics is described. The model is characterized by a linear adsorption isotherm and a linear driving force expression for mass transfer. Its analytic solution can be approximated with an algebraic equation in closed form which is easily evaluated by spreadsheet computation. To demonstrate one application of the fixed bed model, a previously published adsorption system is used as a case study in this work. The adsorption system examined here describes chromium breakthrough in a fixed bed adsorber packed with imidazole functionalized adsorbent particles and is characterized by a nonlinear adsorption isotherm. However, the equilibrium behavior of the fixed bed adsorber is in essence governed by a linear adsorption isotherm due to the use of a low influent chromium concentration. It is shown that chromium breakthrough is predicted reasonably well by the fixed bed model. The model's parameters can be easily extracted from independent batch experiments. The proposed modeling approach is very simple and rapid, and only Excel is used for computation.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.886-895
• /
• 1996

To fit the desorption isotherm and adsorption isotherm for Pangola grass, the modified Henderson model, Chung-Pfost model, modified Halsey model, and modified Oswin model were used to fit the experimental EMC /ERH data. A step-by -step ERH measuring technique was used in this study. The ERH data were collected at three temperature levels of 5 $^{\circ}C$, $25^{\circ}C$ and 5$0^{\circ}C$ for Pangola grass whole plant, stem , and foliage. The modified Halsey model has the best fit for both desorption isotherm and adsorption isotherm of Pangola grass whole plant as compared with other models.

• 대한화학회지
• /
• 제61권3호
• /
• pp.89-96
• /
• 2017

This study proposed adsorption of Pb(II) ions from aqueous solution using activated carbon prepared from areca catechu shell (ACS AC) using Timphan Method. The effects of independent variables on adsorption kinetic and isotherm have been investigated by conducting experiments in batch mode at neutral pH. The structural characterization of adsorbent was done by FT-IR and SEM analysis. The Pb(II) adsorption was correlated very well with the pseudo second-order kinetic (PSOKM) and Langmuir isotherm models (LIM). Increasing NaOH mass for activation and adsorption temperature increased weakly all the parameters of adsorption kinetic and isotherm. The Pb(II) ions adsorption capacity of the ACS AC at 27 and $45^{\circ}C$ was 50.51 and 55.25 mg/g, respectively. Thermodynamic parameters were determined, and the results confirmed the Pb(II) ions adsorption should be endothermic and spontaneous process, and both physical and chemical adsorption should be taken place.