• 제목/요약/키워드: Isopropanol

검색결과 189건 처리시간 0.021초

Poly(dimethyl siloxane)막에 의한 삼성분 알코올수용액의 투과증발 (Pervaporation of Ternary Aqueous Alcohol Solutions through Poly(dimethyl siloxane) Membrane)

  • 김상집;김진환
    • 공업화학
    • /
    • 제7권6호
    • /
    • pp.1087-1095
    • /
    • 1996
  • Poly(dimethyl siloxane)막을 이용하여 $45^{\circ}C$에서 에탄올/이소프로판올/물의 삼성분 혼합물에 대한 투과증발실험을 행하고, 에탄올과 이소프로판올의 존재가 상호의 투과특성에 미치는 영향을 연구하였다. 에탄올과 이소프로판올은 각각 상호의 투과속도를 감소시키는 경향을 나타내었으며, 이소프로판올이 에탄올의 투과에 미치는 영향보다는 에탄올이 이소프로판올의 투과에 미치는 영향이 더 현저하였다. 투과속도의 감소는 고분자막에 대한 에탄올이나 이소프로판올의 가소화 영향보다는 투과성분 사이의 상호작용에 의한 영향이 더 크기 때문으로 생각되었다. 삼성분 혼합물에서 투과성분 사이의 강한 상호작용은 에탄올과 이소프로판올의 투과에 대한 추진력을 감소시키는 결과를 나타내었다.

  • PDF

이소프로판올-물 混合溶媒中의 리튬, 나트륨 및 칼륨 鹽化沕 溶液의 電導度 (Electric Conductance of Dilute Solutions of Lithium, Sodium and Potassium Chloride in Isopropanol_Water Mixtures)

  • 조병린;이영자;김재빈
    • 대한화학회지
    • /
    • 제20권4호
    • /
    • pp.260-265
    • /
    • 1976
  • 여러 組成의 isopropanol-물 混合溶媒中에서 LiCl, NaCl 및 KCl의 稀薄溶液의 電導導를 測定하였다. 그結果, 濃度에 따르는 當量電鍍度의 변화가 Debye-Huckel-Onsager 식에 대해서 좋은 一致를 보였다. 또한 溶媒中의 isopropanol 組成이 증가함에 따라 極限當量電導度${\Lambda}_0의 값이 급격히 減少하며 이것은 溶媒의 粘度增加 및 誘導常數의 감소로부터 예측되는 바와 같다. 그리고 isopropanol의 몰分率이 0.0, 0.1 및 0.2인 溶媒中에서는 {\Lambda}_0가 {\Lambda}_{0,LiCl} < {\Lambda}_{0,NaCl} < {\Lambda}_{0,KCl}의 順으로 증가하고 있으나, 0.3 몰分率 isopropanol-물中에서는 {\Lambda}_{0,LiCl} < {\Lambda}_{0,KCl} < {\Lambda}_{0,NaCl}의 順으로 바뀌고 있다. 또한 Walden product {\Lambda}_{0{\eta}0}$는 0.1몰分率 isopropanol-물中에서 最大値를 보여 주었다.

  • PDF

초임계 건조에 의한 실리카 에어로겔의 저압 합성 (Low Pressure Synthesis of Silica Aerogels by Supercritical Drying)

  • 김동준;현상훈
    • 한국세라믹학회지
    • /
    • 제33권5호
    • /
    • pp.485-494
    • /
    • 1996
  • Silica Aerogels with the density and porosity of 0.1g/cm3 and 96% were synthesized by two different supercri-tical drying processes (i.e additional solvent and intial pressure methods) Isoptopanol was chosen as sol-gel and supercritical drying solvents in order to synthesize aerogels at the lower temperature and pressure because the critical values of isopropanol are lower than those of methanol and ethanol commonly used. The P-V-T relationship of isopropanol was experimentally described for optimizing supercritical drying conditions such as the amount of extra solvent and supercritical drying temperature and pressure. In the addional solvent method monolithic and transparent aerogels were obtained by supercritical drying at 25$0^{\circ}C$ and 900 psing after 40% of the reactor volume was filled with isopropanol. Crack-free aerogels were synthesized at 25$0^{\circ}C$ and 1100~1200 psig by the initial pressure method with an intial nitrogen gas pressure of 400 psig and the isopropanol amount of 5% of the reactor volume.

  • PDF

Effect of different conditions on pervaporation dehydration in CA/NYL66 blend membrane

  • Kazemzadeh, Akram;Mousavi, Seyed M.;Mehrzad, Jamshid;Motavalizadehkakhky, Alireza;Hosseiny, Malihesadat
    • Membrane and Water Treatment
    • /
    • 제10권6호
    • /
    • pp.441-449
    • /
    • 2019
  • In this study, cellulose acetate (CA) / nylon66 (NYL66) (95/5) blend membranes with different thicknesses were prepared by a solvent evaporation method. The effects of membrane thickness (almost $7-25{\mu}m$), feed concentration (70-95 wt.% isopropanol), and feed temperature ($30-60^{\circ}C$) were investigated on the performance of membrane in the separation of isopropanol-water mixtures. With regard to the results of sorption experiments, it was found that the increase of feed temperature enhanced the overall sorption while by increasing feed concentration, the overall sorption passed through a maximum value at 70 wt. % isopropanol (IPA). The best separation factor 3080.51 was gained at high isopropanol concentration 95 wt.%, low feed temperature $30^{\circ}C$, and high membrane thickness $24.62{\mu}m$. Regarding the pervaporation separation index, the obtained results showed that proper values for the thickness of membrane, feed temperature, and isopropanol concentration in feed were $24.62{\mu}m$, $40^{\circ}C$, and 70 wt.%, respectively.

A Simple and Rapid Method to Isolate Low Molecular Weight Proteinase Inhibitors from Soybean

  • Krishnan Bari B.
    • 한국작물학회지
    • /
    • 제49권4호
    • /
    • pp.342-348
    • /
    • 2004
  • Sodium dodecyl sulfate-polyacrylamide gel electrophoresis of the $60\%$ isopropanol extract of soybean(Glycine max [L.] Merr.) seed revealed two abundant proteins with molecular masses of 19 and 10 kDa. Amino acid analysis revealed that the isopropanol-extractable protein fraction was rich in cysteine. Two-dimensional gel electro-phoretic analysis indicated that the 19kDa and 10kDa proteins had pI of 4.2 and 4.0 respectively. Peptide mass fingerprints of trypsin digests of the two proteins obtained using matrix-assisted, laser desorption/ionization-time of flight (MALDI-TOF) mass spectroscopy revealed the 19kDa protein was Kunitz trypsin inhibitor and the 10kDa protein was Bowman-Birk proteinase inhibitor. When resolved under non-denaturing conditions, the isopropanol-extracted proteins inhibited trypsin and chymotrypsin activity. Results presented in this study demonstrate that isopropanol extraction of soybean seed could be used as a simple and rapid method to obtain a protein fraction enriched in Kunitz trypsin and Bowman-Birk proteinase inhibitors. Since proteinase inhibitors are rich in sulfur amino acids and are putative anticarcinogens, this rapid and inexpensive isolation procedure could facilitate efforts in nutrition and cancer research.

Setp-Gradient Mode를 이용한 인지질의 분리 (Separation of Phospholipids in Step-Gradient Mode)

  • 이주원;노경호
    • 공업화학
    • /
    • 제8권4호
    • /
    • pp.694-699
    • /
    • 1997
  • 대두에 포함된 유용 인지질 PE, PI, PC를 분리하기 위해서 정상 HPLC를 이용하였다. 이동상으로 hexane, isopropanol, methanol을 사용하였고 일정용매조성법으로는 세 물질을 분리할 수 없었기 때문에 구배용매조성법을 적용하였다. 최적 분리조건을 구하기 위해서 단 이론과 step-gradient mode에서의 용량인자를 계산하는 식으로부터 농도분포곡선을 계산하였다. 계산 결과에 의하면 PE는 일정용매조성법 (hexane/isopropanol/methanol=90/5/5vo1.%)에서 분리하고 PI와 PC를 분리하기 위해서는 10분의 구배시간과 두번째 이동상을 hexane/isopropanol/methanol=50/20/30(vol.%)으로 계단함수의 구배용매조성법을 사용하는 것이다. 계산된 최적 분리조건을 실험 data와 비교한 결과 잘 일치하였고 이 제시된 방법은 구배용매조성법에서 최적 분리조건을 구하는데 이용될 수 있었다.

  • PDF

투과증발에 의한 이소프로판올 수용액의 분리특성 (Separation Characteristics of Aqueous Isopropanol Solution by Pervaporation)

  • 이규일;김현진;김진환
    • 멤브레인
    • /
    • 제6권1호
    • /
    • pp.22-31
    • /
    • 1996
  • 35$^{\circ}$C에서 polydimethytsiloxane(PDMS)막에 의한 이소프로판올수용액의 투과증발실험을 행하여 이소프로판올의 부피분율이 0.5~0.7범위에서 이상적인 투과속도로부터 가장 크게 벗어났다. 이소프로판올의 가소화 영향은 물의 투과를 증가시키는 데 비하여 물의 존재는 이소프로판올의 투과를 감소시키는 경향을 나타내었다. 혼합물에서 농도에 의존하는 확산계수를 Vignes식으로 나타내고, Flory-Huggins열역학과 Maxwell-Stefan식을 이용하여 투과속도와 선택도를 예측하였다. 이소프로판올과 물 사이의 Flory-Huggins상호작용계수는 과잉Gibbs에너지를 이용하여 계산하였으며 각 액체 성분과 고분자 사이의 상호작용계수는 평행팽윤 실험에 의하여 결정하였다. 이론적으로 예측한 투과속도는 35%이내의 오차범위에서 실험값과 일치하였으며, 투과선택도는 전 농도 범위에서 실험값과 이론값이 잘 일치하였다.

  • PDF

FASs로 코팅한 무기막에 대한 부탄올/물, 이소프로판올/물 용액의 수착 특성 (Sorption Characteristics of Butanol/Water and Isopropanol/Water Solutions on the FASs Coated Inorganic Membrane)

  • 이광래
    • 멤브레인
    • /
    • 제28권5호
    • /
    • pp.320-325
    • /
    • 2018
  • FASs (fluoroalkylsilanes)로 표면 개질한 소수성 막에 대한 부탄올/물, 이소프로판올/물 용액의 수착(sorption)량을 측정하였으며 이들 수착 특성을 Hansen 용해도 파라미터를 이용하여 해석하였다. 부탄올의 수착량이 이소프토판올보다 많았으며, 이는 부탄올의 용해도 파라미터(${\delta}_t=20.4$)와 FASs 소수성 막의 용해도 파라미터(${\delta}_t=16.9$)와의 차이가 이소프로판올 (${\delta}_t=24.6$)과의 차이보다 작기 때문인 것으로 설명할 수 있다. 극성력(${\delta}_p$) 측면에서 살펴보면, FASs 극성력(${\delta}_p=4.6$)과 부탄올의 극성력(${\delta}_p=6.3$)과의 차이가 FASs 극성력(${\delta}_p=4.6$)과 이소프로판올의 극성력(${\delta}_p=9.0$)과의 차이보다 작다. 이는 부탄올-FASs 간의 극성력 차이가 이소프로판올-FASs 간의 극성력 차이보다 작아서 부탄올-FASs 간의 상호인력이 크다는 것을 의미하며, 수착량이 크게 나타나는 결과를 설명할 수 있다. 본 실험결과로부터 막에 대한 알코올의 수착특성, 용매에 대한 용질의 용해도 등을 분석하는데 용해도 파라미터를 이용할 수 있음을 알 수 있다.

Investigation of Demixing Phenomena of a Polymer Solution During the Phase Inversion Process

  • Han, Myeong-Jin;D. Bhattacharyya
    • 한국막학회:학술대회논문집
    • /
    • 한국막학회 1995년도 춘계 총회 및 학술발표회
    • /
    • pp.11-15
    • /
    • 1995
  • Polysulfone (PS) membranes were prepared by the phase inversion process using water or isopropanol as nonsolvent. The Flory-Huggins theory for a ternary system nonsolvent/solvent/polymer is applied to describe the thermodynamic equilibria of the components. The calculated ternary phase equilibria show that demixing of a PS binary solution with n-methylpyrrolidone (NMP) will be fast in a water coagulation bath and will be delayed in an isopropanol bath. The prepared membranes were characterized by SEM, gas adsorption-desorption measurement, and permeability test. The membrane, which is precipitated by fast demixing in a water bath, has nodular structures in the skin region and includes finger-like cavities in the sublayer. The membrane coagulated by isopropanol has a very dense and thick skin structure, which is formed by delayed demixing. The membrane coagulated by isopropanol showed considerably lower pore volume and surface area compared to that observed with water coagulation method. With dimethylformamide (DMF) as solvent and 2-3 wt% of water, the solution can show the liquid-liquid phase separation due to agglomation of the polymer-lean phase from the homogeneous solution. The membranes, which were coagulated near an equilibrium state, show the large (micron size) round pores in the whole membranes. The pores do not contribute the permeation characteristics.

  • PDF