• Journal of The Korea Institute of Healthcare Architecture
• /
• v.28 no.4
• /
• pp.61-69
• /
• 2022

Purpose: In response to the rapid spread of COVID-19 in 2020, the government supported facilities and equipment through the 'Urgent Isolation Ward Expansion Project'. Design and remodeling of efficient negative pressure isolation facilities had to be done in a short period of time, and the performance gap between facilities was very large because the types of hospitals and wards of existing medical facilities were diverse. In order to secure the stability of isolation wards between medical facilities and reduce the facility gap, guidelines for planning isolation wards considering the diversity of each hospital should be appropriately presented. In consideration of these points, this study aims to provide basic data for future remodeling guidelines for each plan type of the negative pressure isolation ward first. Methods: We analyzed the plans before and after the change of 13 case hospitals that performed the urgent care bed expansion project for COVID-19 confirmed patients. Before the remodeling, the current status of the facility was analyzed according to the type of corridor, the location of the nursing station, and the location of the elevator. After remodeling, the flow of medical staff and patients, the flow of entry and exit of clean and contaminated items, and the space of negative pressure and non-negative pressure areas. Results: The ward type was divided into three types according to the corridor type and room arrangement: double loaded corridor type with two side wards, race track type with one side ward, and race track type with two side wards. Based on these three types, the standard floor plan type of the isolation ward was proposed in terms of the location of the elevator bank and Nurse station. Implications: When the existing general ward is converted into a negative pressure isolation ward, this study can be a basic data to present customized guidelines for each ward type.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.20 no.1
• /
• pp.7-14
• /
• 2014

Purpose: In this study, we performed ventilation simulations for a standard isolation ward including three intensive care rooms, one anteroom(buffer room), and its recommended ventilation equipments. The purpose of this study is to predict outflow of pathogenic bacteria from patient breath to verify the reliability and the safety of the isolation ward. Methods: We suppose three scenarios of the movement of medical staff. The leakage of patient's breath to out of the ward is predicted in these scenarios using CFD simulations. Results: The patient's breath leakage rate to out of the ward in scenario 1 according to room air changes per hour(ACH : 6 and 12) is predicted to be 0.000057% and 0.00002%, respectively. The patient's breath leakage rate to out of the ward in scenario 2 according to room air changes(ACH : 6 and 12) is predicted to be 0.00063% and 0.00019%, respectively. The patient's breath leakage rate to out of the ward in scenario 3, which is the worst case(6 room air changes) is predicted to be 0.1%. Implications: Through the ventilation simulation like that in this study, the reliability and the safety on isolation performance of various plan of isolation ward are predicted quantitatively.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.27 no.3
• /
• pp.39-49
• /
• 2021

Purpose: The negative pressure isolation ward is a key facility in preparedness and response to infectious diseases. For the sustainable operation of the facility, appropriate facility improvement is required. The experience of medical staff responding to infectious diseases in the COVID-19 pandemic provides effective informations for facility planning. Methods: The post occupancy evaluation (POE) was conducted by interviewing medical staff who is working on Nationally designated negative pressure isolation ward in general hospital. Floor plan analysis was conducted before field surveys for identifying facility characteristic and spatial composition. After that, field surveys were conducted at 3 hospitals, and interviews and fieldwork were conducted together. Results: It is necessary to increase the standard size of ward area from 15m² to 20m². The size of the doffing room has to be planned for accommodation of two or more people. Equipment storage, clean storage and waste storage also should be properly planned. There were almost no problems with the circulation in the ward. There was not enough space for medical staff. Implications: For a sustainable and safe negative pressure isolation ward planning, it is necessary to exploit learning from the medical staffs who have many experiences of coping with infectious diseases.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.28 no.3
• /
• pp.7-16
• /
• 2022

Purpose: This study aims to establish the basic directions of the modular airborne infection isolation(AII) ward. Considering a specific function and purposed use as a modular AII ward, it is a chance to derive an address of current modular technology by overview the limitation and improvement of the existing modular architecture. Methods: In addition to the literature analysis on the configuration system of mobile hospitals, research cases on the operational effectiveness of the domestic and foreign mobile construction systems are analyzed. Results: In order to meet the various and strict space guidelines of the AII ward and a chance to improve limitations of uniformed existing modulars, AII modular the negative pressurized care setting should be minimized a structural restriction for reflecting its system on a architectural plan. For this unique requirements, it could be possible to apply various space boxes called infill box which needs to secure a large-scale space. So, a rahmen structure system could be adaptable for this purpose. A dead space between beams of the rahmen structure is to be used for MEP installation. Partial separation, dismantling, and repair should be possible by separating the MEP and infill box from the structure. The infill box must keep 3.5m width under the current Road Traffic Act. Implications: It is necessary to utilize and develop an improved construction method that can reduce the problems of existing steel modular and PC modular.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.29 no.4
• /
• pp.29-35
• /
• 2023

Purpose: The 2015 Middle East Respiratory Syndrome (MERS) outbreak and the recent COVID-19 pandemic have highlighted the lack of negative pressure isolation rooms and the fragility of the healthcare system. The need for healthcare facility transformation for respiratory infectious diseases has become more prominent due to COVID-19, and the purpose of this study is to provide a foundation for the rapid, economical, and safe construction of negative pressure isolation wards. Methods: This study analyzes the current status of hospitals that have been converted to negative pressure isolation rooms, and provides architectural plans and examples to provide a reference for bedroom change. Research data of this study have been obtained by analyzing the drawings of negative pressure isolation wards of nationally designated inpatient treatment beds and urgent isolation beds. In addition, the relevant literature of urgent isolation beds has been analyzed to derive bedroom change type. Result: In this study, a total of 21 isolation bed conversion methods have been presented. Implications: In order to change efficiently from a general ward to an isolation ward, it is necessary to consider the actual hospital's infectious disease transmission patterns and facility conditions.

• Journal of radiological science and technology
• /
• v.45 no.4
• /
• pp.347-353
• /
• 2022

In this study, the radiation dose rate was measured by time and distance and evaluated whether radiation dose rate was suitable for domestic and international discharge criteria. In addition, the radiation dose emitted from the patient was measured with a glass dosimeter to evaluate the exposure dose if the caregiver stays in the isolated ward by placing a humanoid phantom instead of the caregiver at a distance of 1 m from the patient, on the second day of treatment. After 23 hours of isolation, the radiation dose rates at a distance of 1 m were 20.54 ± 6.21 µSv/h at 2.96 GBq administration and 27.94 ± 12.33 µSv/h at 3.70 GBq administration. The radiation dose rates at a distance of 1 m were 25.90 ± 2.21 µSv/h when 2.96 GBq was administered and 34.22 ± 10.06 µSv/h when 3.70 GBq was administered after 18 hours of isolation. However, if the isolation period is short may cause unnecessary radiation exposure to the third person. The reading of the attached dosimeter from the morning of the second day of treatment until removal was 0.01 to 0.95 mSv, which is a surface dose determined by the International Commission on Radiation Units and Measurements. And the depth dose was 0.01 to 0.99 mSv. On the second day of treatment, even if the patient caregivers stayed in the isolation ward, the exposure dose of the patient family did not exceed the effective dose limit of 5 mSv recommended by the ICRP and NCRP.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.23 no.2
• /
• pp.63-72
• /
• 2017

Purpose: The purpose of this study is to review the material handling system of the Airborne Infection Isolation Hospitals which is the one of the key elements of infection control and to improve the basic data for the planning and design of those facilities. Methods: Research was conducted by literature reviews and case studies for the material handling system of domestic and foreign Isolation hospitals. Results: The result of this study can be summarized into three points. First, a general isolation unit and a high level isolated unit need to be distinguished in terms of efficiency and safety. In particular, it is desirable that a high level isolated unit have to completely separate clean and soiled circulations, and soiled corridor should be installed by those means. By doing this, the medical staff can observe patient rooms and supply clean materials directly in the clean zone without wearing PPE, so that safety and work efficiency can be improved at the same time. Second, for the safe disposal of wastes, it is desirable to install a dedicated sterilizer per ward and sterilize it at least in the ward. In addition, It is desirable to install a central waste treatment room and a dedicated soiled corridor in consideration of the inadequate handling capacity and emergency situation. Third, the characteristics of material flow chart in the negative pressured isolation hospitals and the corresponding material handling system have been presented. Implications: Infection control is very important in safety, but it is necessary to respond to the symptoms of the patient.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.19 no.1
• /
• pp.23-34
• /
• 2013

Purpose: Many researches have clearly begun to address the relationship between people and their physical environments. These represent that children experience traditional hospital environments as unpleasant and scary. More specifically, children in hospitals face many psychological and emotional challenges: isolation, painful procedures, separation from family members, all in unfamiliar settings. For this reason, some have argued that the children's experiences within hospital environments can lead to poorer health outcomes. This study has been started in order to provide basic informations for the planning of Healing rest space in pediatric ward. Methods: Literature reviewes and field surveys to rest space at pediatric ward in Korea and foreign country have been conducted for the data collection. Results: The result of this study can be summarized into eight environment factor for healing rest space in pediatric ward: family, noise, safe, choice opportunity, light, privacy, social support and distract from disease or death. Implications: In the rest space in pediatric ward, it is necessary to consider healing rest space for promoting healing from disease and normal developing of children.

• Journal of Korean Academy of Nursing
• /
• v.14 no.2
• /
• pp.55-62
• /
• 1984

This study was performed from september 26th to October 7th 1981 to investigate the contamination problems of Nurse's hands characterized by var-ious nursing functions. A total of 50 nurse's hands were sampled from 5 different wards of H. University Hospital. The samples were cultured for isolation of microorganisms. The results were as follows: 1. Of 50 Nurses 23 were found to be contaminated by 9 species of bacilli such as Non-fermentative gram negative Bacilli, Gram negative bacilli, Oxidase positive, Enterobacter, Escherichia coli, Pseudomonas aeruginosa, Acinetobacter, Staphylococcus epidermidis, Gaffkya tetragens, Bacillus subtilis. 2. The contaminate rates by wards where they have been serving are; 7 (87.5％) of 8 nurses from Intensive care unit, 7(70%) of 10 nurses from general surgery ward, 3(50%) of 6 nurses from neurosurgery ward, 2(20%) of 10 nurses from orthopedic surgery ward, 4(25%) of 10 nurses from medical ward. 3. The contamination rates by the types of clinical service offered are 6(85.7%) of 7 nurses after wound dressing assist 6 (55.3%) of 13 nurses after vital sign check. 4. No statistical significance could he observed as to the between the rates of contamination of nurse's hands with various nursing functions (0.1

• KIEAE Journal
• /
• v.17 no.1
• /
• pp.55-61
• /
• 2017

Purpose : As the necessity of reinforcement of infections management in medical facilities after MERS increased, Ministry of Health and Welfare promulgated the enforcement regulations of medical law on February 3, 2017. Its main objective is to improve patients' safety and medical-care quality through the establishment of isolation facilities from infectious diseases and the set-up of standards for In-patient and ICU facilities. The purpose of this study is necessarily to propose a standardized spatial composition model for ward modules by analyzing changing environments of in-patient facilities according to the strengthened medical law. Method: Theoretical studies will be undergone of Evidence-based Designs to improve patients' safety, medical quality, and domestic/overseas in-patient room guidelines. With reference to the status of 24 general hospitals over 500 beds, the spatial compositions of the in-patient rooms and the types of multi/single bed room modules will be analyzed. The directions of future in-patient room module changes through the study of the minimum ward module types and various ward types will be presented. Result: This paper will hopefully provide guidelines for hospitalization rooms that can be applied to the revised rules of medical law enforcement and provide a basis for a comprehensive study of patients' safety and efficient infection control as well.