• Proceedings of the KIEE Conference
• /
• 2009.04a
• /
• pp.77-79
• /
• 2009

Nonlinear system fault detection and isolation of this paper is about the failure of unknown function approximation using neural network for fault detection and isolation techniques of induction motors were applied. observer-based fault signal residual value was used. Induction motor using the speed controller of the backstepping controller. Proposed fault detection and isolation to prove the performance of the simulation was applied to and the actual system.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.1
• /
• pp.68-79
• /
• 1998

In this paper, we propose a model-based FDI(fault detetion and isolation) algorithm to detect and isolate fault in a linear system. The proposed algorithm is gased on an HFC(hydrid fault classifier) which consists of an FCART2(fault classifier by ART2 neural network) and an FCFM(fault classifier by fault models) which operate in parallel to isolate faults. The proposed algorithm is functionally composed of three main parts-parameter estimation, fault detection, and isolation. When a change in the system occurs, the estimated parameters go through a transition zone in which errors between the system output and the stimated output and the estimated output cross a predetermined thrseshold, and in this zone the estimated parameters are tranferred to the FCART2 for fault isolation. On the other hand, once a fault in the system is detected, the FCFM statistically isolates the fault by using the error between ach fault model out put and the system output. From the computer simulation resutls, it is verified that the proposed model-based FDI algorithm can be performed successfully to detect and isolate faults in a position control system of a DC motor.

• Journal of Information Technology Applications and Management
• /
• v.13 no.4
• /
• pp.141-153
• /
• 2006

According to supply of super high way internet service, importance of security becomes more emphasizing. Therefore, flawless security solution is needed for blocking information outflow when we send or receive data. large enterprise and public organizations can react to this problem, however, small organization with limited work force and capital can't. Therefore they need to elevate their level of information security by improving their information security system without additional money. No hackings can be done without passing invasion blocking system which installed at the very front of network. Therefore, if we manage.isolation log effective, we can recognize hacking trial at the step of pre-detection. In this paper, it supports information security manager to execute isolation log analysis very effectively. It also provides isolation log analysis module which notifies hacking attack by analyzing isolation log.

• Proceedings of the IEEK Conference
• /
• 2001.06e
• /
• pp.115-118
• /
• 2001

In this paper we propose an FDI(fault detection and isolation) algorithm using neural network-based multi-fault models to detect and isolate single faults in nonlinear systems. When a change in the system occurs, the errors between the system output and the neural network nominal system output cross a threshold, and once a fault in the system is detected, the fault classifier statistically isolates the fault by using the error between each neural network-based fault model output and the system output.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.39 no.1
• /
• pp.24-32
• /
• 2002

This paper is concerned with the fault diagnosis for stuck-at faults of a multistage interconnection network(MIM) which is a kind of interconnection networks in multicomputer systems. Up to the present, a fault diagnosis scheme has dealt with a fault model of all types, which results in complicated algorithms. In the literature, it is shown that a number of steps and computation are required for the fault detection and isolation algorithms for a class of MINs. In this paper, we propose a simple and easily implementable algorithm for the detection and isolation of the stuck-at fault in MIM. specifically, we develope an at algorithm for the isolation of the source fault in switching elements whenever tile stuck-at fault is detected in MINs. After all, the proposed algorithm is illustrated by an example of 16$\times$16 baseline networks of MINs.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.29 no.6
• /
• pp.37-49
• /
• 2002

The objective of this research was an investigation of the important green spaces in Daegu and to present the basic frame of green network in Daegu. Present the condition of the significant green spaces is as follows: In the 3km radius of the city center, the isolation and discontinuation of the green spaces was extensive, caused by crowding of houses and funeral parlours. Consequently, the isolation relaxation which leads to the additional creation of the green spaces and a buffering plan were demanded. In the transfer area of a 3∼6km radius, which is located between the city center's congested area and the suburb green spaces, the significant green spaces had high connection and buffering characteristic, but in the northwest and the south, serious discontinuation appeared between the suburb green spaces and the city conte green spaces. In the 6∼9km radius, the suburb important green spaces accomplished the function which extended the back core green spaces to the city center area. But creation of buffering green spaces was necessary in part because of proximity to the resident area. The results suggest a connection between green spaces on the base of the distribution of the important green spaces, were as follows: In the 3km radius, irregular direction lines appeared while a schedule one direction line appeared in 3∼6km and 6∼9km radius. The discontinued parts of the green network were caused by industrial complexes, house crowding, and cultivation areas. Consequently, reservation and creation plans of green spaces in response to this were demanded. Through the additional creation of green spaces in the discontinued parts, the basic frame of green network in Daegu was the radiation annular form. And it was suitable to activate the parks and the general green spaces.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.9
• /
• pp.75-84
• /
• 2009

In this paper, the EPC Network as the most important technologies in the field of applied technology research and special attention to the use of RFID to better manage the disease in infected U-MAS (U-Medical Administrative Services) system was designed. U-MAS system, the Center for Disease Control in the illness, depending on the type of isolate and treat infected patients, recovery, discharge, isolation wards and intensive italian to manage and increase efficiency, manual and use a simple computer program improve the qualify of the current level, using RFID tags to improve the management of the patient everything that a little more and be out of the isolation ward, if competent disease management districts, such as the location to respond more quickly to facilitate the purpose is to contribute to. First, EPC Network and related technology for mobile RFID systems and related technology research. U-MAS system design offers. If you take advantage of the proposed U-MAS system for monitoring infectious disease patients and patients in the isolation ward, when the unauthorized departure location to shorten the time it takes to improve the effectiveness of disease management and present the elected effects was.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.39 no.1
• /
• pp.42-50
• /
• 2002

In this paper, we propose an FDI(fault detection and isolation) method using neural network-based multi-fault models to detect and isolate faults in nonlinear systems. When a change in the system occurs, the errors between the system output and the neural network nominal system output cross a threshold, and once a fault in the system is detected, the fault classifier statistically isolates the fault by using the error between each neural network-based fault model output and the system output. From the computer simulation results, it is verified that the proposed fault diagonal method can be performed successfully to detect and isolate faults in a nonlinear system.

• Journal of electromagnetic engineering and science
• /
• v.16 no.3
• /
• pp.194-197
• /
• 2016

An eight-element compact low-profile multi-input multi-output (MIMO) antenna is proposed for wireless local area network (WLAN) mobile applications. The proposed antenna consists of eight inverted-F antennas with an isolation-enhanced structure. By inserting the isolation-enhanced structure between the antenna elements, the slot and capacitor pair generates additional resonant frequency and decreases mutual coupling between the antenna elements. The overall size of the proposed antenna is only $33mm{\times}33mm$, which is integrated into an area of just $0.5{\lambda}{\times}0.5{\lambda}$. The proposed antenna meets 5-GHz WLAN standards with an operation bandwidth of 4.86 - 5.27 GHz and achieves an isolation of approximately 30 dB at 5 GHz. The simulated and measured results for the proposed antenna are presented and compared.

• Journal of Korean Society of Water and Wastewater
• /
• v.20 no.1
• /
• pp.35-43
• /
• 2006

Concerns related to protecting, identifying, and isolating of subsystems of a water distribution network have led to the realization of the increased importance of valves in the system. The most important purpose of valves in water distribution systems is to isolate a subsystem due to breakage, maintenance activities, or contamination. A subsystem called segment is isolated by the closure of adjacent valves. Minimizing the pipe failure impact, an efficient algorithm is required to identify adjacent valves quickly. In this paper, an algorithm to identify adjacent valves to be closed to isolate a subsystem from the remainder of a network when a pipe failure is presented. The algorithm is operated on a matrix called the valve location matrix containing the information of valve locations. An application to an existing water distribution system demonstrates the developed algorithm efficiently locates the adjacent valves for the isolation of a broken pipe.