• Korean Journal of Microbiology
• /
• v.33 no.1
• /
• pp.31-37
• /
• 1997

Intergeneric hybrids between Aspergillus niger and Perricillium ch~y.sop~um(Tyr ), hyperlipolytic enzyne-producing fungi, were obtained by nuclear transfer technique:. Optimal conditions for formation of intergeneric hybrids were investigated. Maximum production of protoplasts were obtainrd by 1% Novozym 234 at $30^{\circ}C$ for 3 hrs and the most effective osmotic stabilizers for the isolation of protoplasts were 0.6 M KC]. Frequencies of hybrid formation by nuclear transfer were $1.3{\times}$10^{-3}$$ $-3.8{\times}$10^{-3}$$. From the chervation of genetic stability, conidial size, DNA content, ;md nuclear stain, it was suggested that their karyotypes are aneuploid. The hybrids showed 1.4-2.2 fold higher lipase activities than parental strains. It was strongly supported by results of this study that nuclear transfer technique is much more efficient in the formation of intergeneric hybrids than protoplast fusion and is very useful for the improvement of strains.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.5
• /
• pp.2092-2099
• /
• 2013

Through the data transfer race in industry since 1990s, the operational speed of optical disk drive(ODD) becomes commonly over 10,000 rpm. Such high speed operation inevitably causes the vibration, which is also the disturbances in the read-write process of pick-up servo-controller. Generally the vibration disturbance problem can be solved by the vibration isolation using the rubber mount and the increase of robustness of the pick-up servo-controller. Optical disk itself has not been targeted for the vibration reduction, because it is manufactured under the standardized format. In this paper we focused on the increase of critical speed of optical disk, that is, the improvement of dynamic characteristics, with the control of residual stresses which are come from the injection molding process. To do this, first, the residual stresses induced from the injection molding process are calculated using finite element method. The major design parameters of the process conditions are flow rate and melt temperature, which control the residual stresses in optical disk. Second, the critical speed of optical disk is calculated with modal analysis considering residual stress distributions. It was found out that the critical speed can be improved by the control of operational parameters in the injection molding process.

• Quality Improvement in Health Care
• /
• v.19 no.1
• /
• pp.30-42
• /
• 2013

Objectives: This study was intended to check if the "Creating Clean Wards" project, which is an innovative reinforced campaign activity targeting infection control strategies and active surveillance cultures for VRE (vancomycin resistant enterococci) high-risk patients to be admitted in the NS (neuro-surgery) wards, would be reduced the incidence rates of VRE acquisition, transmission rates. Methods: 75 subjects of the VRE high-risk patients were surveyed by carrying out active surveillance cultures of VRE colonization 11 times from January to March, 2012. And the retrospective study was conducted dividing them into two groups. Results: The incidence rates of VRE acquisition was reduced to 3.67 cases per 1,000 patients day in the control group and to 2.88 cases in experimental group, which was not statistically significant (p = .753). VRE transmission rates of 0.0015 per day before the project tended to increase to 0.0019, although not statistically significant (p = .650). As a result of multivariate analysis with regard to using glycopeptide antibiotics in order to find out risk factors of VRE colonization, the patients who had been treated with glycopeptide until VRE colonization showed 274.41 times higher rate. Conclusion : For effective VRE infection control in NS wards, We should carry out active surveillance culture regularly, especially patient of using glycopeptide. And block the spread of VRE by strengthening infection control through the strict isolation and the changed mind-set of members motivated by the "Creating Clean Wards" campaign.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.9
• /
• pp.1269-1278
• /
• 2013

Crack remediation on the surface of cement mortar using microbiological calcium carbonate ($CaCO_3$) precipitation (MICP) has been investigated as a microbial sealing agent on construction materials. However, MICP research has never acknowledged the antifungal properties of calcite-forming bacteria (CFB). Since fungal colonization on concrete surfaces can trigger biodeterioration processes, fungi on concrete buildings have to be prevented. Therefore, to develop a microbial sealing agent that has antifungal properties to remediate cement cracks without deteriorative fungal colonization, we introduced an antifungal CFB isolated from oceanic islands (Dokdo islands, territory of South Korea, located at the edge of the East Sea in Korea.). The isolation of CFB was done using B4 or urea-$CaCl_2$ media. Furthermore, antifungal assays were done using the pairing culture and disk diffusion methods. Five isolated CFB showed $CaCO_3$ precipitation and antifungal activities against deteriorative fungal strains. Subsequently, five candidate bacteria were identified using 16S rDNA sequence analysis. Crack remediation, fungi growth inhibition, and water permeability reduction of antifungal CFB-treated cement surfaces were tested. All antifungal CFB showed crack remediation abilities, but only three strains (KNUC2100, 2103, and 2106) reduced the water permeability. Furthermore, these three strains showed fungi growth inhibition. This paper is the first application research of CFB that have antifungal activity, for an eco-friendly improvement of construction materials.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.46 no.2
• /
• pp.147-153
• /
• 2013

To prevent paralytic shellfish poisoning (PSP) due to the consumption of shellfish contaminated with PSP toxins, the quantitative analysis of these toxins is very crucial. The AOAC International mouse bioassay (MBA) has been used widely for the routine monitoring of PSP toxins for more than 50 years. However, this method has low sensitivity and high limit of quantification (LOQ) and interferences from other components in the extract, and it cannot determine toxic profiles. Ethical problems also exist with the continued use of this live mouse assay. To establish an alternative method to the MBA used for PSP toxins analysis, we attempted to optimize the analysis conditions of a precolumn high-performance liquid chromatography (HPLC) oxidation method and succeeded in validating its accuracy and precision in quantifying PSP toxins. A clear peak and the isolation of PSP toxins were obtained by injecting the working standards of Certified Reference Materials using HPLC. The LOQ of the precolumn HPLC oxidation method for PSP toxins was about $0.1002{\mu}g/g$, which represented an approximately fourfold improvement in detection capability versus the AOAC MBA. The intra-accuracy and precision for PSP toxins in oysters were 77.0-103.3% and 2.0-5.7%, respectively, while the respective inter-accuracy and precision were 77.3-100.7% and 2.4-6.0%. The mean recoveries of PSP toxins from oysters were 75.2-112.1%. The results of a comparison study showed good correlation between the results of the precolumn HPLC oxidation method and those of MBA, with a correlation factor of 0.9291 for mussels. The precolumn HPLC oxidation method may be used as an alternative to, or supplementary method with, MBA to monitor the occurrence of PSP toxins and to analyze the profiles of these toxins in shellfish.

• Microbiology and Biotechnology Letters
• /
• v.14 no.5
• /
• pp.359-363
• /
• 1986

S. diastaticus hydrolysised $\alpha$-1.4 linkage of the starch and was known fermenting yeast strain, but poorly hydrolized $\alpha$-1.6 linkage of the starch. To improve the starch fermentation ability of yeast, we tried that protoplast fusion between S. diastaticus and C. tropicalis and finally two starins of fusant (FPDC42, FPDC43) were obtained. C. tropicalis well hydrolysis both $\alpha$-1.4 and $\alpha$-1.6 linkanges in the starch. The protoplast of parental auxotrophic cells were fused in the presence of 10mM CaCl$_2$ and 35% of polyethylene glycol (M. W. 4,000). The fusion frequency was 10$^{-5}$ to 10$^{-6}$. Properties of the fusants(genetic stability, assimilation of carbon sources, random spore formation, copper resistance, NaCl tolerance, DNA content, cell size and growth rate) were investigated.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.69-70
• /
• 2006

In lithium-ion batteries, separator membrane's, main role is to physically isolate a cathode and an anode while maintaining rapid transport of ionic charge carriers during the passage of electric current. As far as battery safety is concerned, the electrical isolation of electrodes is most crucial since unexpected short-circuits across the membrane induces hot spots where thermal runaway may break out. Internal short-circuits are generally believed to occur by protrusions on the electrode surface either by unavoidable deposits of metallic impurities or by dendritic lithium growth during battery operation. Another cause is shrinkage of the separator membrane when exposed to heat. If separator membrane can be engineered to prevent the internal short-circuit, it will not be difficult to improve lithium-ion batteries' safety. Commonly the separators employed in lithium-ion batteries are made of polyethylene (PE) and/or polypropylene (PP). These materials have terrible limitations in preventing the fore-mentioned internal short-circuit between electrodes due to their poor dimensional stability and mechanical strength. In this study we have developed a novel separator membrane that possesses very high thermal and mechanical stability. The cells employing this separator provided noticeable safety improvement in the various abuse tests.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.244-244
• /
• 2010

Doping process of crystalline silicon solar cell process is very important which is as influential on efficiency of solar. Doping process consists of pre -deposition and diffusion. Each of these processes is important in the process temperature and process time. Through these process conditions variable, p-n junction depth can be controled to low and high. In this paper, we studied a optimized doping pre-deposition temperature for high solar cell efficiency. Using a $200{\mu}m$ thickness multi-crystalline silicon wafer, fixed conditions are texture condition, sheet resistance($50\;{\Omega}/sq$), ARC thickness(80nm), metal formation condition and edge isolation condition. The three variable conditions of pre-deposition temperature are $790^{\circ}C$, $805^{\circ}C$ and $820^{\circ}C$. In the $790^{\circ}C$ pre-deposition temperature, we achieved a best solar cell efficiency of 16.2%. Through this experiment result, we find a high efficiency condition in a low pre-deposition temperature than the high pre-deposition temperature. We optimized a pre-deposition temperature for high solar cell efficiency.

• The Journal of Korean Association of Computer Education
• /
• v.11 no.2
• /
• pp.89-98
• /
• 2008

Providing appropriate interactions between learner and e- Learning system is an essential factor of a successful e-Learning system. Although many interaction functions are employed in multimedia Web-based Instruction content, learner experience a lack of similar feedbacks from educators in real- time due to the limitation of Human-Computer Interaction techniques. In this paper, an emotion recognition system via learner facial expressions has been developed and applied to a tutoring system. As human educators do, the system observes learners' emotions from facial expressions and provides any or all pertinent feedback. And various feedbacks can bring to motivations and get rid of isolation from e-Learning environments by oneself. The test results showed that this system may provide significant improvement in terms of interesting and educational achievement.

• Journal of Technologic Dentistry
• /
• v.22 no.1
• /
• pp.145-152
• /
• 2000

In order to select an effective antibiotic substance against oral resident bacteria, we were isolated from soil and texonomically analyzed. Seven hundred and eighteen strains were isolated on humic acid- vitamin agar(HV agar) and 220 strains were on methanol medium from three each paddy forest, field and riverside soil samples. So, during the screening of antibiotics from soil, we isolated microorganisms showing powerful antagonistic activity against oral resident bacteria. Microorganism was tested against 25 strains of bacteria, yeast and fungi. Among them, No. 248 strain exhibited the most strongly growth inhibition. So, the taxonomical analysis the isolated strain was found to be unknown Actinomyces sp. and was named No 248. A production of the antibiotics from No. 248 begins at the early exponential phase developed at the 72th hour under the optinum conditions. The property of No. 248 antimicrobial compound was very stable under acid(pH 3.0) and alkali(pH 10.0) treatment, but it was instable in heat treatment at $120^{\circ}C$. For the improvement of antibiotic activity, two mutants were isolated from strain No. 248 by the treatment of mutagenic agents, NTG and hydroxylamine. As a result, the mutant strains excreted the potent antibiotics to inhibit the growth of Candida albicans.