• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.276-279
• /
• 1997

When a magnetostrictive material is exposed to a magnetic field, its geometry changes due to a magnetostrictive effect. The magnetostriction is analogous to the piezoeletricity. The displacement of the magnetostrictive material is proportional to the applied current while that of the piezoelectric material is proportional to the voltage. A magnetostrictive material generates large displacement and higher compressive force compared with a piezoeletric material. These advantages provide a good performance of a vibration isolation of a platform. In this work, it is applied to a driving actuator for vibration isolation of a platform. The properties of a magnetostrictive material are investigated in terms of hysteresis and displacement vs. applied current for a various preload. Modeling of the displacement of the vibration isolating actuator is performed as it behaves as a flow source. A sliding mode controller is designed to demonstrate the ability of the magnetostrictive actuator to reduce the vibration at the platform. The effectiveness of the proposed scheme is demonstrated through experimental works. The experimental results of the vibration of the platform axe presented in terms of time response and frequency response.

• 대한조선학회논문집
• /
• 제46권3호
• /
• pp.290-302
• /
• 2009

Pipe system widely used in a ship is usually attached to the hull of a ship, and its vibration lead to structure-borne noise. Rubber mount is usually used as a vibration isolator of a pipe in a ship. In this paper, the effects of several factors, besides the stiffness and damping of the rubber mount, on vibration-isolating performance are taken into consideration. The parameters considered in this paper are hardness of the rubber material, painting on the rubber and deformation from clamping. Through the results of parametric study, the effective specifications of rubber mount are suggested to improve vibration-isolating performance. The performance under fluid flowing condition is calculated numerically and verified experimentally.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2005년도 Proceedings of The 6th korea-china joint workshop on nuclear waste management
• /
• pp.236-244
• /
• 2005

Radioactive wastes arising from a wide range of human activities are in many different physical and chemical forms, contaminated with varying radioactivity. Their common feature is the potential hazard associated with their radioactivity and the need to manage them in such a way as to protect the human environment. The geological disposal is regarded as the most reasonable and effective way to safely disposal high-level radioactive wastes in the world. The conceptual model of geological disposal in China is based on a multi-barrier system that combines an isolating geological environment with an engineered barrier system. The buffer is one of the main engineered barriers for HLW repository. The buffer material is expected to maintain its low water permeability, self-sealing property, radio nuclides adsorption and retardation property, thermal conductivity, chemical buffering property, overpack supporting property, stress buffering property over a long period of time. Benotite is selected as the main content of buffer material that can satisfy above. GMZ deposit is selected as the candidate supplier for Chinese buffer material of High Level Radioactive waste repository. This paper presents geological features of GMZ deposit and basic property of GMZ Na bentonite. GMZ bentonite deposit is a super large scale deposits with high content of Montmorillonite (about $75\%$) and GMZ-l, which is Na-bentonite produced from GMZ deposit is selected as reference material for Chinese buffer material study.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1533-1538
• /
• 2008

The development of new material systems like Carbon Fiber Reinforced Polymer (CFRP) places ever higher demands on the techniques for non-destructive material characterisation. Image-producing eddy current methods also need to satisfy these demands. Eddy-current imaging of FRP is based on the anisotropic electrical properties of the material investigated. Significant differences in conductivity between carbon fibres, polymer matrix and integrated functional components can be found. The availability of high-resolution sensors enables access to the local distribution of the electromagnetic properties. The static and dynamic procedures for isolating influential characteristics, already in use in eddy-current technology, can now be supplemented by topographical images. The precondition for a successful implementation of the eddy-current procedure is a deeper understanding of the image-generating process which allows correct interpretation of the images obtained.

• 한국광학회지
• /
• 제19권3호
• /
• pp.161-168
• /
• 2008

본 논문에서는 왼손(left-handed)과 오른손(right-handed) 방향으로 각각 $180^{\circ}$ 트위스트(${\pi}$-twist)된 액정상을 두 개의 안정상태로 가지는 쌍안정(bistable) 액정 디스플레이(liquid crystal display)를 제안한다. 제안된 소자는 액정과 자외선경화 폴리머 물질의 혼합물의 비등방성 상분리 방법으로 형성된 격벽에 의해 화소고립된(pixel-isolation) 구조를 가지며, 인가전압의 주파수에 따라 유전율 이방성의 부호가 바뀌는 이중주파수(dual-frequency) 특성의 네마틱(Nematic) 액정을 사용한다. 두 안정된 액정상 사이의 스위칭은 인가전압의 주파수를 연속적으로 변화시킴으로써 이루어지며, 주파수 변화에 따른 액정의 유체 효과에 의해 발생하므로 응답특성이 매우 빠르다. 두 액정상은 카이랄 도펀트(chiral dopant)가 아니라 격벽이 가지는 앵커링(anchoring)의 영향으로 안정화됐기 때문에 거의 동일한 탄성에너지(elastic free energy)를 가지게 되어 우수한 메모리 특성을 나타낸다. 또한, 위상지연필름을 이용한 투과형 광학보상을 통해 높은 정면 명암비(contrast ratio)를 가질 수 있다.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권8호
• /
• pp.763-769
• /
• 1997

In this study we have synthesized Zno:Eu phosphors under various sintering atmospheres and temperatures. The analysis of X-ray diffractometer measurement indicates that for Zno:EuCl$_3$ phosphors sintered in air and vacuum 뗘 exists in the host lattice as Eu$_2$O$_3$and EuOCl respectively. From the photoluminescence for the phosphors sintered in vacuum Eu removes the broad-band emission of the ZnO host consequently isolating the red emission due to Eu$^{3+}$ ion and improves the color purity of red emission. The photoluminescence excitation and time resolving spectrum measurements suggest that energy-transfer process occurres from the self-activated defect center in ZnO host the Eu$^{3+}$ ion which exist in the host lattice in the form of EuOCl.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 가을 학술발표회 논문집
• /
• pp.196-200
• /
• 1996

In the case of construction under the marine environment the durability of concrete structures is everely deteriorated by the penetration of salts which results in the corrosion of reinforcing steel. To verify the effect of corrosion protection of reinforcing steel by isolating the penetration of chlorideion this study investigated the bond strength between painting material and concrete, the degree of the penetration-diffusion of chloride ion and the accelerated corrosion test using different potential. Results show that the painted concrete has little the penetration-diffusion of cholride and the reinforcing steel in painted concrete is little corroding.

• 한국소음진동공학회논문집
• /
• 제21권9호
• /
• pp.805-812
• /
• 2011

This study investigated the characteristics of heavy-weight floor impact sounds of box-frame type structure using 1:10 scale model. Ten types of floor structures(bare slabs and floating floors) were evaluated in terms of dynamic stiffness and loss factor. Floor vibrations and radiated sounds generated by simulated impact source were also measured. The results showed that the bakelite was appropriate for simulating concrete slab in the 1:10 scale model, and surface velocity and sound pressure level of concrete slab measured from the scale model showed similar tendencies with the results from in-situ in frequency domain. It was also found that dynamic behaviors of layered floor structures in the 1:10 scale model were similar to those in a real scale. Therefore, the use of 1:10 scale model would be useful for evaluating the heavy-weight floor impact sound insulation of layered floor structures when the frequency-dependent dynamic properties of each material are known.

• 대한토목학회논문집
• /
• 제44권1호
• /
• pp.11-17
• /
• 2024

제진 구조는 댐퍼라는 장치를 구조물에 장착시켜 지진에너지를 소산하는 내진설계이다. 지진피해를 저감하고자 하는 연구가 성행하고 있는 가운데 제진 구조는 댐퍼의 재료, 형상을 변경함으로써 기술을 발전시켜왔다. 하지만 댐퍼의 특성상 에너지를 소산하기 위해 재료에 발생하는 소성변형은 피할 수 없는 한계가 있다. 따라서 본 연구에서는 발생한 변형를 스스로 회복할 수 있는 초탄성 형상기억합금(Superelastic shape memory alloy, SSMA)을 활용하여 반영구적으로 사용할 수 있고 추가적인 긴장력을 적용하여 구조적 성능을 향상한 장수명 댐퍼를 제안하였다. 장수명 댐퍼의 거동 특성 분석을 위해 재료, 와이어 직경, 긴장력 유무의 설계 변수에 따라 유한요소해석을 진행하였고 응답 거동을 도출하여 하중 저항, 에너지 소산, 잔류변위 등의 특성을 분석하여 장수명 댐퍼의 성능적 우수성을 입증하였다.

• 한국어병학회지
• /
• 제24권3호
• /
• pp.297-305
• /
• 2011

A trap identification system for isolating functional sequences to allow the constitutive expression of foreign protein from Edwardsiella tarda was developed. Using the green fluorescent protein (GFP) reporter-based trap system, various functional sequences to drive heterologous expression of the GFP were selectable in Escherichia coli host. However from the bioinformatic sequence analysis, all the segments predicted as regulatory regions were not native promoters actually existing upstream of endogenous E. tarda genes. Instead, a number of non-authentic sequences, possibly resulted from the random shuffling and/or intermolecular ligation were also proven to be able to display a potent GFP expression in the recombinant E. coli. Further analysis with selected clones showed that both authentic and non-authentic sequences could function in as a constitutive promoter, leading quite a consistent and stable GFP expression after repetitive subcultures. Microscopic examination also confirmed the uniform pattern of GFP expression in every host bacterium. Semi-quantitative assay of GFP showed that there was no clear relationship between expression levels and organizational features of the promoters trapped. Functional promoter-like elements achieved in the present study could be a good starting material for multivalent genetic engineering of E. tarda in order to produce recombinant vaccines in a cost-effective fashion.