• 한국전산유체공학회:학술대회논문집
• /
• 2005.10a
• /
• pp.213-217
• /
• 2005

In this study the water including sediment is assumed that the density is different from fresh water. And the phenomenon inhaled by low pressure around the pipe is numerically simulated in two dimension. The simulation is done using finite difference method in rectangular staggered mesh system and Navier-Stokes equations and continuty equation are employed as governing equations. The method of Irregular leg lengths and stars are adopted to satisfy boundary condition of body boundary. Marker-Density method is used to calculate the density of mixed flow. Also SGS turbulence model is applied to consider vortex smaller then grid at high Renolds number. This study is to analyze inhalation phenomenon of mixed flow with sediment and to verify the numerical method for mixed flow. To verify the numerical results are compared with experimental results

• Proceedings of the KIEE Conference
• /
• 2006.07a
• /
• pp.609-610
• /
• 2006

As developing the information society, Lighting Emitted diode(LED) which is light source for illumination of next generation is attracted public attention. LED have many problem as narrow light view angle, high price, drift phenomenon of color coordinate, high heating problem for lower power, lower weight and small size. So, many researches have continued in a illumination as LED module type. in this problem, heating problem is very important and difficult and that is caused in decreasing phenomenon of brightness and drift phenomenon of color coordinate. so the problem of heating is urgent question for illumination of LED. In this paper, structural design of PCB changed as two type for solving the heating problem. also the properties of heating is analysed and optical properties is measured with heating image camera and spectrometer according to change in this design.

• Proceedings of the KIEE Conference
• /
• 2006.07d
• /
• pp.2241-2242
• /
• 2006

As developing the information society, Lighting Emitted diode(LED) which is light source for illumination of next generation is attracted public attention. LED have many problem as narrow light view angle, high price, drift phenomenon of color coordinate, high heating problem for lower power, lower weight and small size. So, many researches have continued in a illumination as LED module type. in this problem, heating problem is very important and difficult and that is caused in decreasing phenomenon of brightness and drift phenomenon of color coordinate. so the problem of heating is urgent question for illumination of LED. In this paper, structural design of PCB changed as two type for solving the heating problem. also the properties of heating is analysed and optical properties is measured with heating image camera and spectrometer according to change in this design.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.1275-1276
• /
• 2006

As developing the information society, Lighting Emitted diode(LED) which is light source for illumination of next generation is attracted public attention. LED have many problem as narrow light view angle, high price, drift phenomenon of color coordinate, high heating problem for lower power, lower weight and small size. So, many researches have continued in a illumination as LED module type. in this problem, heating problem is very important and difficult and that is caused in decreasing phenomenon of brightness and drift phenomenon of color coordinate. so the problem of heating is urgent question for illumination of LED. In this paper, structural design of PCB changed as two type for solving the heating problem. also the properties of heating is analysed and optical properties is measured with heating image camera and spectrometer according to change in this design.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.45 no.3
• /
• pp.1-11
• /
• 2008

This paper proposes a real-time method using a 3-axis accelerometer to enhance blurred images taken from a camera loaded in mobile devices. Blurring phenomenon is a smoothing effect occurring in photo images. Algorithms to cope with blurring phenomenon is essential since small-size mobile devices tremble severely by even a tiny hand-shaking of a user. In this paper, accurate sensing characteristics of the 3-axis accelerometer is acquired by applying the sensor in pendulum motion and the blurring phenomenon is modeled as a uniform distribution and Gaussian distribution. Also, non-Gaussian distributed model is observed in the experiment of real blurring phenomenon and a particular deblurring function is designed by reversing the model. It has been demonstrated that the application of trembling information to the deblurring function adequately removes the blurring phenomenon.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.20 no.12
• /
• pp.3792-3803
• /
• 1996

Since the skew beam element has two curvatures which are a curvature and a torsion, spatial behavior of curved beam which cannot be included in one plane can be anlayzed by emploting the skew beam element. The $C^{0}$-continuous skew beam element shows the stiffness locking phenomenon when full integration is employed. The locking phenomenpn is characterized by two typical phenomena ; one is the much smaller displacement thant the exact one and theother is the undelation phenomenon is stress distribution. In this paper, we examine how unmatched coefficient in the constrained energy brings about the locking by Reduced Minimization theory. We perform the numerical ones. These comparisons show that uniformly full integration(UFI), which employs full integration for the constrained energy, entails the locking phenomenon. But the use of uniformly reduced integration(URI) of selectively reduced integration(SRI), which employs reduced integration for constrained energy, does not produce the significant errors of displacements of the undulation phenomenon in stress distribution since they do not entails the locking, Additionally, the error due to the approximated parameters for describing the geometry of skew beam is examined.d.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.8 no.4
• /
• pp.85-92
• /
• 2000

The pulsating pressure waves are composed of fundamental frequency and higher order harmonics in exhaust pipe of engines. The nonlinearity in exhaust pipe is caused by their interactions. The error which is between prediction and measurement is induced by the nonlinearity. We can not explain this phenomenon using linear acoustic theory which is existing theory. So power spectrum which was used in linear theory is not useful. Bispectrum and bicoherence functions which are a higher order spectrum are applicable to explain this phenomenon. This paper proposes a nonlinear effect of pulsating pressure waves. The phenomenon proposed here is identified by using of higher order spectrum density functions.

• Asia pacific journal of information systems
• /
• v.7 no.2
• /
• pp.225-266
• /
• 1997

A Causal Transition Model of the IT impact on organization is proposed. The model is based upon the premise that the IT impact is a multi-phase, multi-realm phenomenon, and that the IT impact in one organizational realm logically transpires to another realm, thus forming complex causal webs among them. Two exploratory research studies, the one qualitative and the other quantitative, were conductea to validate the model in a setting involving major structural reorganization of the organizations' IT function. The research results provide support for the general theory structure of the model. The findings include: ⅰ) the IT impact manifests on multiple organizational realms, with different degrees of strength, ⅱ) the impact on the realms follow a particular causal transition path among them, and ⅲ) the IT impact manifests on and through the information processing aspect of work. The results, however, indicate that people's perception of the IT impact is strongly mitigated by the IT relevance of work, and that the organization is affected as much by the structural arrangement surrounding and accompanying the IT as by the technology itself, suggesting that the IT impact is an organizational phenomenon as well as a technological phenomenon. The implications of the research results are discussed at the end.

• Cross-Cultural Studies
• /
• v.33
• /
• pp.359-384
• /
• 2013

There is linguistic phenomenon that Korean syllable, morpheme and word are substituted with Chinese Character. These phenomenon is called Chinese Character Borrowing, the Chinese character used here is called Borrowed Chinese Character. Whereas borrowing Chinese character in Chinese is used for borrowing only sound for different word, borrowing Chinese character in Korean is used for assigning new meaning. Hence, by borrowing Chinese character in Korean, a syllable which had no meaning originally get new meaning, morpheme and word meaning has changed. At advertisement and campaign, Chinese Character Borrowing has lots of linguistical advantage such as visual immediacy, effectiveness of meaning expression. However, there are number of cases found that violate grammar rule and word constitution practice by Chinese Character Borrowing. For this reason, Chinese Character Borrowing has the problem polluting Korean along with another foreign words. Thus, this paper focus on study Chinese Character Borrowing phenomenon in Korean, and analysis its effectiveness and impact in Korean. In addition, analysis the problem of Borrowed chinese Character, and suggestion several alternative for right use of Korean is followed.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.2
• /
• pp.445-454
• /
• 1991

In this thesis, Mindlin plate element with nine nodes and three degrees-of-freedom at each node is formulated and is employed in eigen-analysis of a rectangular plates in order to alleviate locking phenomenon of eigenvalues. Eigenvalues and their modes may be locked if conventional $C_{0}$-isoparametric element is used. In order to reduce stiffness locking phenomenon, two methods (1, the general reduced and selective integration, 2, the new element that use of modified shape function) are studied. Additionally in order to reduce the error due to mass matrix, two mass matrixes (1, Gauss-Legendre mass matrix, 2, Gauss-Lobatto mass matrix) are considered. The results of eigen-analysis for two models (the square plate with all edges simply-supported and all edges built-in), computed by two methods for stiffness matrix and by two mass matrixes are compared with theoretical solutions and conventional numerical solutions. These comparisons show that the performance of the two methods with Gauss-Lobatto mass matrix is better than that of the conventional plate element. But, by considering the spurious rigid body motions, the element which employs modified shape function with full integration and Gauss-Lobatto mass matrix can elevate the accuracy and convergence of numerical solutions.