• International Journal of Advanced Culture Technology
• /
• 제11권2호
• /
• pp.109-117
• /
• 2023

Menstrual cycle irregularity reflects the reproductive health of women of childbearing age, but studies are scant on women in communities. In this study, we identified factors associated with menstrual cycle irregularity among 884 community women of childbearing age (19-40 years) and confirmed the relationship between menstrual cycle irregularity and depressive symptoms. Data were collected through online or mobile platforms. We noted that 25% of participants had menstrual cycle irregularity. Multivariable ordinal logistic regression analysis revealed that age, irregular eating, and depressive symptoms were associated with menstrual cycle irregularity. After adjusting for confounding variables, participants with depressive symptoms were at a slightly higher risk of menstrual cycle irregularity (odds ratio = 1.078, confidence interval = 1.021-1.139). Additional support be provided for community-living women of childbearing age with depressive symptoms, to improve their reproductive health

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제6권11호
• /
• pp.2992-3007
• /
• 2012

Recently there has been an increasing interest in exploring the radio irregularity research problem in Wireless Sensor Networks (WSNs). Measurements on real test-beds provide insights and fundamental information for a radio irregularity model. In our previous work "LMAT", we solved the path planning problem of the mobile anchor node without taking into account the radio irregularity model. This paper further studies how the localization performance is affected by radio irregularity. There is high probability that unknown nodes cannot receive sufficient location messages under the radio irregularity model. Therefore, we dynamically adjust the anchor node's radio range to guarantee that all the unknown nodes can receive sufficient localization information. In order to improve localization accuracy, we propose a new 2-hop localization scheme. Furthermore, we point out the relationship between degree of irregularity (DOI) and communication distance, and the impact of radio irregularity on message receiving probability. Finally, simulations show that, compared with 1-hop localization scheme, the 2-hop localization scheme with the radio irregularity model reduces the average localization error by about 20.51%.

• Structural Engineering and Mechanics
• /
• 제90권1호
• /
• pp.41-49
• /
• 2024

In recent years, China's high-speed railway (HSR) line continues to expand into seismically active regions. Analyzing the features of earthquake rail irregularity is crucial in this situation. This study first established and experimentally validated a finite element (FE) model of bridge-track. The FE model was then combined with earthquake record database to generate the earthquake rail irregularity library. The sample library was used to construct a model of desired earthquake rail irregularity based on signal processing (SFT) and hypothesis principle. Finally, the effects of random pier height and random span number on desired irregularity were analyzed. Herein, an equivalent method of calculating earthquake rail irregularities for random structures was proposed. The results of this study show that the amplitude of desired irregularity is found to increase with increasing pier height. When calculating the desired irregularity of a structure with unequal pier heights, the structure can be regarded as that with equal pier heights (taking the largest pier height). For a structure with the span number large than 9, its desired irregularity can be considered equal to that of a 9-span structure. For the structures with both random pier heights and random span number, their desired irregularities are obtained by equivalent calculations for pier height and span number, respectively.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.1624-1630
• /
• 2011

Currently the train operating environment to affect track irregularity is changed rapidly such as speed-up, linear improvement and rolling stack upgrade. The recent track maintenance criteria of track irregularity was quoted from past Japan's, and the needs of revision of criteria are increased because of the rapid change in train operating environment. In case of enhance the track irregularity criteria, it secure driving safety and riding comfort but maintenance cost are increase. And also decrease ballast durability by frequent corrective work. In case of mitigate the criteria, it decrease driving safety and riding comfort, but save the maintenance cost. The study for enacting rational criteria did not carry out so far. In this study, survey the domestic and international track irregularity and case study for track irregularity inspection results and maintenance history for guideline of enacting irregularity criteria study.

• Advances in nano research
• /
• 제12권5호
• /
• pp.483-488
• /
• 2022

The present work is an attempt to study the vibration analysis of the single-walled carbon nanotubes (SWCNTs) under the effect of the surface irregularity using Donnell's model. The surface irregularity represented by the parabolic form. According to Donnell's model and three-dimensional elasticity theory, a novel governing equations and its solution are derived and matched with the case of no irregularity effects. To understand the reaction of the nanotube to the irregularity effects in terms of natural frequency, the numerical calculations are done. The results obtained could provide a better representation of the vibration behavior of an irregular single-walled carbon nanotube, where the aspect ratio (L/d) and surface irregularity all have a significant impact on the natural frequency of vibrating SWCNTs. Furthermore, the findings of surface irregularity effects on vibration SWCNT can be utilized to forecast and prevent the phenomena of resonance of single-walled carbon nanotubes.

• Earthquakes and Structures
• /
• 제26권5호
• /
• pp.349-361
• /
• 2024

Excessive torsional behaviour is one of the major reasons for failure of buildings, as inferred from past earthquakes. Numerous seismic codes across the world specify a displacement-based or drift-based criterion for classifying buildings as torsionally irregular. In recent years, quite a few researchers have pointed out some of the inherent deficiencies associated with the current codal guidelines on torsional irregularity. This short communication paper aims to envisage the need for a revision of the displacement-based guidelines on torsional irregularity, and further highlight the appropriateness of a rotation-based criterion. A set of 6 reinforced concrete building models with asymmetric shear walls are analysed using ETABS v18.0.2, by varying the number of stories from 1 to 9, and the torsional irregularity coefficient of various stories is calculated using the displacement-based formula. Since rotation about the vertical axis is a direct indication of the twist experienced by a building, the calculated torsional irregularity coefficients of all stories are compared with the corresponding floor rotations. The conflicting results obtained for the torsional irregularity coefficients are projected through five categories, namely mismatch with floor rotations, inconsistency in trend, lack of clarity in incorporation of negative values, sensitivity to low values of displacement and error conceived in the mathematical formulation. The findings indicate that the irregularity coefficient does not accurately represent the torsional behaviour of buildings in a realistic sense. The Indian seismic code-based values of 1.2 and 1.4, which are used to characterize buildings as torsionally irregular are observed to be highly sensitive to the numerical values of displacements, rather than the actual degree of rotation. The study thus emphasizes the revision of current guidelines based on a more relevant rotation-based or eccentricity-based approach.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.2173-2178
• /
• 2008

Railroad is the major factor of vibration source in railway vehicles, and it must carefully maintained the original condition to secure the safety and good ride comfort of passenger. Measuring the condition of rail irregularities such as surface, alignment, gauge, twist and cant etc is required to maintain the good performance of railroad. Currently, the various rail irregularity measurement systems(EM120, ROGER1000K and the Total Rail Irregularity Measurement system of Korea High Speed Train) are operated in Korea to estimate the rail irregularity. It is hard to verify the correlation of one rail irregularity data of a measurement system with the other, because they have been adopted different rail irregularity estimation methods. The best method securing the reliability of the irregularity data is the direct confirmation on the ground where the measurement system had detected as a fault section, but it is impossible to apply all sections simultaneously due to limitation of time, labor, cost and equipments. There is a method to secure the reliability of the data by using acceleration values. Rail irregularities, the major factor of vibration in railway vehicle, are transmitted to the vehicle acceleration through masses, springs, dampers and joints as the system dynamic formation. In this study, Transition Function has been adopted by using the rail irregularity and the acceleration value regarding as input & output parameters respectively. It has been verified by comparing the analyzed results with real measured irregularity data from the Total Rail Irregularity Measurement system of Korea High Speed Train. Also various methods has been accomplished to verify the correlation between rail irregularities and acceleration values.

• 문화기술의 융합
• /
• 제8권5호
• /
• pp.547-552
• /
• 2022

본 연구에서는 궤도틀림이 차륜-레일 상호작용력에 미치는 영향을 분석하고 이를 바탕으로 궤도틀림을 관리할 수 있는 하중기반의 궤도틀림 분석기법을 제안하였다. 도시철도 침목플로팅궤도와 직결도상 접속구간에서 발생된 고저틀림 측정결과를 이용하여 고저틀림이 차륜-레일 상호작용력(동적윤중)과 레일의 진동가속도에 미치는 영향을 해석적으로 분석하였다. 직결궤도 총 4개소를 대상으로 부분적으로 직결궤도를 포함한 침목플로팅궤도 구간과 전, 후 인접 침목플로팅궤도 구간으로 구분하여 고저틀림을 비교, 분석하였다. 분석결과, 직결궤도를 포함한 구간이 침목플로팅궤도 보다 궤도틀림이 크게 나타났다. 고저틀림 데이터를 적용한 차륜-레일 상호작용력 분석결과, 거리에 비해 상대 변위차가 큰 구간에서 차륜-레일 상호작용력과 레일가속도가 증가하는 것으로 분석되었다. 반면 고저틀림 데이터의주기와 틀림량(변위)이 일정한 구간의 경우 차륜-레일 상호작용력과 레일가속도가 상대적으로 작게 나타났다. 따라서고저틀림의 주기가 짧고 상대변위차가 클수록 차륜-레일 상호작용력 측면에서 불리한 것으로 분석되었다. 본 연구에서는 궤도틀림 측정데이터를 이용한 차륜-레일 상호작용 해석을 통해 차륜-레일의 상호작용력을 바탕으로한 하중기반의 궤도틀림 분석기법 적용방안을 제시하였다.

• Structural Engineering and Mechanics
• /
• 제74권5호
• /
• pp.699-709
• /
• 2020

Torsional irregularity is one of the most probable types of horizontal irregularity and existence of this irregularity in most of the structural loading codes is determined by calculating the ratio of the maximum to the average story drift. No specific method has been previously recommended by the codes to calculate the mentioned ratio in the response spectrum analyses. In the current investigation, nine steel building structures with different plan layouts and number of stories have been analyzed and designed in order to evaluate the efficiency of three methods for calculating the ratio of the maximum to the average story drift in the response spectrum analyses. It should be noted that one of these methods is the approach used by current version of ETABS software andother ones are proposed in this paper. The obtained results using the proposed methods are compared with the time history analysis results. The comparisons show that one of these methods underestimates the mentioned ratio in all studied models, however, the other two methods have shown similar results. It is also found that the plan layouts and irregularities can affect how these methods estimate the ratios compared to those obtained by the time history analysis. Generally, it can be concluded that all of these methods can properly predict the ratio with acceptable errors.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2006년도 추계학술대회 논문집
• /
• pp.1264-1269
• /
• 2006

Measurement and estimation of rail irregularity is an important factor to concern travelling safety of train. Now a day, rail irregularity have been measured by EM120 and ROGER 1000K imported from MERMAC Co. Italy and making researches actively in Korea. This paper mainly consider to find correlation between acceleration value of wheel axle in HSR350x and rail irregularity value measured by EM120.