• 한국정밀공학회지
• /
• 제15권8호
• /
• pp.174-182
• /
• 1998

This paper describes a research work of developing a computer-aided design and machining of irregular shaped-sheet metal product for blanking or piercing operation. An approach to the CAD/CAM system is based on the knowledge-based rules. Knowledge for the CAD/CAM system is formulated from plasticity theories, experimental results and the empirical knowledge of field experts. The system has been written in AutoLISP on the AutoCAD and in customer tool kit on the SmartCAM with a personal computer and is composed of nine modules, which are input and shape treatment, flat pattern-layout, production feasibility check, blank-layout, strip-layout, die-layout, data conversion, modelling, and post-processor module. Based on knowledge-based rules, the system is designed by considering several factors, such as material and thickness of product, complexities of blank geometry and punch profile, diameter and material of a wire, and availability of press. This system is capable of generating NC data automatically according to drawings of die-layout module. Results which are carried out in each module will provide efficiencies to the designer and the manufacturer of blanking or piercing die in this field.

• Radiation Oncology Journal
• /
• 제20권3호
• /
• pp.274-282
• /
• 2002

목적 : 방사선치료시 환자에 조사되는 방사선량을 매 치료시마다 간편하게 확인하기 위한 생체내(in vivo) 선량측정의 한 방법으로 투과선량을 이용하는 새로운 시스템에 필요한 알고리즘을 이미 개발한 바 있다. 본 연구에서는 조사면 일부가 차폐된 부정형 조사면에서 적용하기 위한 보정 알고리즘을 개발하고자 하였다. 재료 및 방법 : 알고리즘을 개발하기 위한 기본 자료를 마련하기 위하여 투과선량 측정을 시행하였다. 측정에는 선형가속기의 6 MV 및 10 MV의 X선을 이용하였고, 이온함형 측정기 및 전위계를 사용하였다. 측정조건으로는 조사면의 크기(collimator opening)는 $2\times2\;cm^2$에서 $32\times32\;cm^2$까지 한 변을 2 cm씩 증가시켜 16단계로 하였고, 팬톰 두께(phantom thickness; Tp)는 0, 10, 20 및 30 cm, 팬톰과 측정기간의 거리(phantom chamber distance; PCD)는 10, 30 및 50 cm으로 하였다. 이 때 조사면의 일부를 차폐하였으며 차폐되지 않은 유효조사면(effective field size)의 크기를 $5\times5,\;10\times10,\;15\times15$ 및 $20\times20\;cm^2$으로 하였다. 결과 : 조사면의 일부가 차폐체에 의하여 차폐된 경우 종양선량이 감소되며 동시에 투과선량도 감소된다는 물리학적인 추론을 이용하여 방사선조사면 일부 차폐가 투과선량에 미치는 영향을 보정하기 위한 알고리즘을 개발하였으며 조사면 일부가 차폐된 여러 측정 조건에서 알고리즘을 이용한 계산치와 실제측정치 간의 오차는 ${\pm}1.0\%$ 이내이었다. 결론 : 투과선량 계산 알고리즘은 조사면 일부가 차폐된 불규칙 조사면의 경우 ${\pm}1.0\%$ 이하의 오차 범위로 정확히 투과선량을 계산할 수 있음을 확인하였다.

• 한국정밀공학회지
• /
• 제15권2호
• /
• pp.124-133
• /
• 1998

This paper describes a research work of developing a computer-aided design of blanking and piercing for irregular-shaped sheet metal products. An approach to the development of compact and practical CAB system is based on the knowledge-based rules. Knowledge for the CAD system is formulated from plasticity theories, experimental results and the empirical knowledge of field experts. The system has been written in AutoLISP on the AutoCAD with a personal computer. Based on knowledge-based rules, the system, STRT-DES, is designed by considering several factors, such as complexities of blank geometry and punch profile, availability of press equipment and standard parts, utilization ratio which minimizes the scrap in a single or a pairwise operation, bridge width, grain orientation and design requirements which maximize the strength of the part when subsequent bending is involved. This system checks a forming feasibility with both internal and external features, a dimension of blanked hole, and a corner and a fillet radius for irregualrly shaped sheet metal products. Therefore this system can carry out a die design for each process which is obtained from results of an automated blank layout drawing with a best utilization ratio for irregular shape of product that was successful in production feasibility check module and those of an automated strip layout drawing and generate part drawings and the assembly drawing of die set in graphic forms.

• 한국정밀공학회지
• /
• 제15권3호
• /
• pp.18-23
• /
• 1998

This paper describes a research work of developing a computer-aided design of blanking and piercing for irregular-shaped sheet metal products. An approach to the CAD system is based on the knowledge-based rules. Knowledge for the CAD system is formulated from plasticity theories, experimental results and the empirical knowledge of field experts. The system has been written in AutoLISP on the AutoCAD with a personal computer and is composed of four main modules, which are input and shape treatment, flat pattern layout, production feasibility check, and strip layout module. Based on knowledge-based rules, the system is designed by considering several factors, such as radius and angle of bend. material and thickness of product, complexities of blank geometry and punch profile, and availability of press. This system is capable of unfolding a formed sheet metal part to give flat pattern and automatically account for the adjustment of bend allowances to match tooling requirements by checking the dimensions and relationships of parts of the folded product. Also this system can carry out a process planning which is obtained from results of irregular shape of product that was successful in production feasibility check module according to flat pattern layout and generate strip layout drawing in graphic forms. The developed system provides its efficiency for flat pattern layout, and strip layout for the irregularly shaped sheet metal products.

• Journal of Magnetics
• /
• 제16권4호
• /
• pp.461-465
• /
• 2011

Traditional magnetostrictive/piezoelectric laminate composites are generally in the regular geometries such as rectangles or disks. To explore properties of the irregular geometry magnetostrictive/piezoelectric transducer in the fundamental resonant frequency, a step dumb-bell shaped Magnetoelectric (ME) transducer is presented in this study. Both analytical and experimental investigations are carried out for the dumb-bell shaped transducer in the fundamental frequency. Comparing with the traditional rectangular transducer, the theory shows the resonant frequency of dumb-bell shaped transducer is reduced 31%, and the experiment gives the result of that is 37% which is independent of dc magnetic fields. The ratio of magnetoelectric voltage coefficient (MEVC) between the dumb-bell shaped and rectangular shaped transducers in theory is 66% comparing with that of in experiment is varying from 140% to 33% when the dc field is increased from 0 Oe to 118 Oe.

• 한국식물병리학회지
• /
• 제11권3호
• /
• pp.282-284
• /
• 1995

Grey leaf spot on tomato plants was first observed in Sedo-myeon, Puyo-kun, Chungnam province of Korea in 1994. This disease which had not been reported before in Korea exhibited different symptoms from those of other leaf spot diseases on tomato plants. The symptoms were characterized by small irregular-shaped spots on leaves at the initial stage of the infection, subsequent spread and coalescence of the spots throughout the leaves with ultimate necrosis, and abscission from the plants. When healthy tomato plants were inoculated with a conidial suspension of the fungus isolated from the lesion of a diseased plant in a field, the same characteristic symptoms as those in the field were produced. Furthermore, the same pathogen could be reisolated from the lesions formed buy the inoculation. Conidial characteristics of the pathogen were as follows; oblong shape with constricted 3 transverse septa, round-shaped base, round- or point-shaped apex, size of 45~75$\times$12.5~17.5 ${\mu}{\textrm}{m}$, and 3.5 : 1 ratio of length to width. The pathogen was identified as Stemphylium lycopersici and thus this is the first report on the occurrence of grey leaf spot disease on tomato plants caused by s. lycopersici in Korea.

• Earthquakes and Structures
• /
• 제13권4호
• /
• pp.377-386
• /
• 2017

Earthquake-induced pounding damages to building structures were repeatedly observed in many previous major earthquakes. Extensive researches have been carried out in this field. Previous studies mainly focused on the regular shaped buildings and each building was normally simplified as a single-degree-of-freedom (SDOF) system or a multi-degree-of-freedom (MDOF) system by assuming the masses of the building lumped at the floor levels. The researches on the pounding responses between irregular asymmetric buildings are rare. For the asymmetric buildings subjected to earthquake loading, torsional vibration modes of the structures are excited, which in turn may significantly change the structural responses. Moreover, contact element was normally used to consider the pounding phenomenon in previous studies, which may result in inaccurate estimations of the structural responses since this method is based on the point-to-point pounding assumption with the predetermined pounding locations. In reality, poundings may take place between any locations. In other words, the pounding locations cannot be predefined. To more realistically consider the arbitrary poundings between asymmetric structures, detailed three-dimensional (3D) finite element models (FEM) and arbitrary pounding algorithm are necessary. This paper carries out numerical simulations on the pounding responses between a symmetric rectangular-shaped building and an asymmetric L-shaped building by using the explicit finite element code LS-DYNA. The detailed 3D FEMs are developed and arbitrary 3D pounding locations between these two buildings under bi-directional earthquake ground motions are investigated. Special attention is paid to the relative locations of two adjacent buildings. The influences of the left-and-right, fore-and-aft relative locations and separation gap between the two buildings on the pounding responses are systematically investigated.

• 대한방사선치료학회지
• /
• 제14권1호
• /
• pp.79-84
• /
• 2002

1.목적 : 작고 불규칙한 모양의 전자선 조사면에서 선원의 출력에 영향을 미치는 요인은 선형가속기의 collimation system, insert block diameter, energy 등이다. 때문에 이러한 조사면의 선량계산으로 LBR을 이용할 수 있는데 LBR(lateral build-up ratio)이란 동일한 incident fluence와 profile에 대해 circular field와 broad field의 선량비로서 나타낼 수 있다. 얻어진 LBR data는 elementary pencil beam 모형을 근거해 깊이와 에너지에 따른 함수(${\sigma}$)로 표현할 수 있다. 여기에서 얻어진 수식을 기초로 해서 만들어진 factor값이 작고 부정형의 전자선 조사면의 선량계산 유용성을 알아보고자 한다. 2.재료 및 방법: 심부선량은 water phantom에서 ion chamber로 측정하였다. Cerrobend와 electron applicator 에 따른 incident fluence의 변화를 알아보기 위해 Chamber를 0.5mm깊이에 놓고 측정하였다. 그리고 에너지와 electron applicator 크기에 따라 insert block diameter를 2-15cm로 변화시키며 심부선량을 측정하였고 이 값을 0.5mm 깊이에서 normalization 하였다. 이렇게 normalization 한 그래프로부터 LBR과 함수 (${\sigma}$)를 얻어했다. 3.결과 : 0.5mm 깊이에서 normalization한 심부선량-그래프로부터 LBR data와 그로부터 얻어낸 (${\sigma}$)함수 값을 기초로 하여 elementary pencil beam 모형의 깊이에 빠른 선량변화의 수식을 얻어낼 수 있었다. 4.결론 : 부정형 전자선 조사면에 대해 MU당 심부선량은 작은 circular field에서 측정된 LBR값, reference applicator와 insert block diameter 에 따른 incident fluence factor 그리고 reference broad field에서의 심부선량등 세 가지 data로 부터 계산할 수 있다. 이 방법을 이용하면 어떤 모양의 전자선 조사면에 대해서도 심부선량의 계산에 유용하다고 할 수 있다.

• Radiation Oncology Journal
• /
• 제9권2호
• /
• pp.343-350
• /
• 1991

종양모양에 거의 일치하는 선량분포를 얻기위해 다층부정형필터를 이용하는 방법을 보였으며, 필터의 재질은 Lipowitz (일명 cerrobend alloy) 금속체를 이용하였다. 선속내 필터의 놓임은 일차선의 감쇄와 함께 조직내 산란선 기여율의 변화가 예상되므로 필터의 두께에 따른 SMR의 변화가 계산에 이용되어야 된다. 이에 본 연구의 계산선량은 실측치의 $3\%$이내에서 잘 일치됨을 알 수 있었다. 다층부정형필터를 이용한 펜톰의 원호조사의 선량평 가는 동일 필터에 의한 고정조사의 선량분포가 적용되었으며, 가상종양에 거의 일치하는 선량분포를 얻을수 있었다. 한편, 컴퓨터모의계산된 선량과 열발광산량계(teflon-embedded TLD)의 실측선량은 비교적${\pm}5\%$ 범위내에서 잘 일치됨을 알 수 있었으며, 이 치료방법은 현재 차폐체로 많이 이용되고 있는 Lipowitz 금속체를 사용함으로써 보다 쉽게 응용되어질 것으로 생각된다.

• 한국의학물리학회지:의학물리
• /
• 제13권1호
• /
• pp.21-26
• /
• 2002

블록을 사용한 부정형 전자선 조사면에서의 선량율(relative output factor, ROF)을 계산하는 전자선 알고리듬을 개발하고, 측정값과 계산값을 비교하여 알고리듬을 평가하였다. 전자선의 선량은 산란판, 전자선 cone 등 모든 요소를 고려한 1차선 부분과 블럭에 의한 2차선의 합으로 표시할 수 있다고 가정하였으며, 1차선은 가우스 분포를, 2차선은 거리역제곱 법칙만을 따른다고 가정하였다. 2차선 블럭 산란에 의한 각 분포는 고려하지 않았다. 이런 방법으로 전자선의 ROF를 유효 SSD, 1차선 분포 표준편차, 2차선 발생율 등 3가지의 인자만을 이용하여 선량율을 계산할 수 있는 단순한 방식을 고안하였다. 6, 9, 12, 16, 20 MeV의 전자선을 사용하여 이 모델을 검증하였다. 측정은 항상 개방 조사면의 선량 최대지점 깊이에서 실시하였으며 다양한 정사각형 치료면 측정으로 3개의 인자를 구할 수 있었다 직사각형 조사면과 부정형 조사면에 대하여 이 모델을 이용한 계산값과 측정값의 차이는 평균 1.0％이내였으며, 최대 2.1％를 넘지 않았다. 본 연구에서 개발한 알고리듬은 필요한 인자가 3개이면서 매 전자선 콘마다 5∼6회 측정으로 구할 수 있어서 임상 적용에 편리하며, 계산 결과가 정확하여 특이 오차를 보이는 유형에 관한 보완 연구를 수행하면 임상에 사용할 수 있음을 보였다.