• Earthquakes and Structures
• /
• v.26 no.6
• /
• pp.433-447
• /
• 2024

During earthquakes, regular buildings perform better than irregular buildings. In general, seismic design codes define a regular building using estimates of Storey Stiffness and Storey Strength. At present, seismic design codes do not recommend a specific method to estimate these parameters. Consequently, any method described in the literature can be applied to estimate the aforementioned parameters. Nevertheless, research has demonstrated that storey stiffness and storey strength vary depending on the estimation method employed. As a result, the same building can be regular or irregular, depending on the method employed to estimate storey stiffness and storey strength. Hence, there is a need to identify the best method to estimate storey stiffness and storey strength. For this purpose, the study presents a qualitative and quantitative evaluation of nine approaches used to determine storey stiffness. Similarly, the study compares six approaches for estimating storey strength. Subsequently, the study identifies the best method to estimate storey stiffness and storey strength using results of 350 linear time history analyses and 245 nonlinear time history analyses, respectively. Based on the comparison, it is concluded that the Fundamental Lateral Translational Mode Shape Method and Isolated Storey Method - A Particular Case are the best methods to estimate storey stiffness and storey strength of low-to-mid rise buildings, respectively.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.9 no.6
• /
• pp.63-77
• /
• 2006

The research aim is to classify biotope types of rural eco-villages designed by ministry of environment and analyze landscape ecological characteristics of them. This information would provide information on eco-villages' potential and specific needs to improve landscape ecological structure of eco-villages. Two eco-villages, designated by ministry of environment, in Yoocheon-ri and Sanduk-ri were selected and the landscape ecological metrics used in this study were Area, Shannon diversity index, Shape index, Distance index. The results are as follows. 1) There were five biotope types in large-scale classification, 13 biotope types m Sanduk-ri and 9 biotope types in Yoocheon-ri in middle-scale classification, 31 biotope types in Sanduk-ri and 24 biotope types in Yoocheon-ri in small-scale classification. 2) In the case of area, artificial biotope types, such as artificial forest, agricultural irrigation canal, wet paddy, dry paddy and residential area, covered more than 80% of total area. However, natural biotope types, such as natural forest, river, reservoir, covered just more than 10% of total area. In details, an orchard (26.69%) was the dominant biotope type, followed by artificial forest (19.10%) in Sanduk-ri and the first most abundant biotope type was artificial forest (49.71%), followed by wet paddy (15.95%) in Yoocheon-ri. 3) The result of Shannon diversity index indicated that Sanduk-ri (2.158) had more heterogeneity landscape, rather than Yoocheon-ri (2.051). 4) In the case of shape index, road (13.09) had more complex and irregular shape than either agricultural irrigation canal (3.35) or artificial forest (2.46) in Sanduk-ri. Road (6.52) was also the most irregular biotope shape, followed by river (5.70) and agricultural irrigation canal (4.78) in Yoocheon-ri. 5) Mean Nearest-neighbour Distance (MND) was smallest in wet paddy and dry paddy biotope types in the two study area, suggesting that these biotope types were concentrated within these study areas. From the result, this research suggested information to protect and improve biotopes of eco-villages in the landscape ecological terms. To achieve this improvement plan, there should be strong support by ministry of environment and local governments.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.2
• /
• pp.124-133
• /
• 1998

This paper describes a research work of developing a computer-aided design of blanking and piercing for irregular-shaped sheet metal products. An approach to the development of compact and practical CAB system is based on the knowledge-based rules. Knowledge for the CAD system is formulated from plasticity theories, experimental results and the empirical knowledge of field experts. The system has been written in AutoLISP on the AutoCAD with a personal computer. Based on knowledge-based rules, the system, STRT-DES, is designed by considering several factors, such as complexities of blank geometry and punch profile, availability of press equipment and standard parts, utilization ratio which minimizes the scrap in a single or a pairwise operation, bridge width, grain orientation and design requirements which maximize the strength of the part when subsequent bending is involved. This system checks a forming feasibility with both internal and external features, a dimension of blanked hole, and a corner and a fillet radius for irregualrly shaped sheet metal products. Therefore this system can carry out a die design for each process which is obtained from results of an automated blank layout drawing with a best utilization ratio for irregular shape of product that was successful in production feasibility check module and those of an automated strip layout drawing and generate part drawings and the assembly drawing of die set in graphic forms.

• Progress in Medical Physics
• /
• v.28 no.1
• /
• pp.33-38
• /
• 2017

Creating individualized build-up material for superficial photon beam radiation therapy at irregular surface is complex with rice or commonly used flat shape bolus. In this study, we implemented a workflow using 3D printed patient specific bolus and describe our clinical experience. To provide better fitted build-up to irregular surface, the 3D printing technique was used. The PolyLactic Acid (PLA) which processed with nontoxic plant component was used for 3D printer filament material for clinical usage. The 3D printed bolus was designed using virtual bolus structure delineated on patient CT images. Dose distributions were generated from treatment plan for bolus assigned uniform relative electron density and bolus using relative electron density from CT image and compared to evaluate the inhomogeneity effect of bolus material. Pretreatment QA is performed to verify the relative electron density applied to bolus structure by gamma analysis. As an in-vivo dosimetry, Optically Stimulated Luminescent Dosimeters (OSLD) are used to measure the skin dose. The plan comparison result shows that discrepancies between the virtual bolus plan and printed bolus plan are negligible. (0.3% maximum dose difference and 0.2% mean dose difference). The dose distribution is evaluated with gamma method (2%, 2 mm) at the center of GTV and the passing rate was 99.6%. The OSLD measurement shows 0.3% to 2.1% higher than expected dose at patient treatment lesion. In this study, we treated Mycosis fungoides patient with patient specific bolus using 3D printing technique. The accuracy of treatment plan was verified by pretreatment QA and in-vivo dosimetry. The QA results and 4 month follow up result shows the radiation treatment using 3D printing bolus is feasible to treat irregular patient skin.

• Journal of Korean Association for Spatial Structures
• /
• v.10 no.2
• /
• pp.105-115
• /
• 2010

Recently, High-rise building are irregular-shaped to be city landmarks and function as vertical cities to enable the efficient use of land. 3T (Twisted, Tilted & Tapered) designs are being suggested for irregular buildings and studies to develop new structural system have been actively made to satisfy slender shape ratio. In diagrid system, not only gravity load but also lateral load is delivered based on the triangular shape of diagrid, so most of columns are eliminated. Because shearing force is delivered by the axial behavior (tensile/compressive) of diagrid to minimize shearing deformation, the system is more applicable to irregular buildings than existing system where shearing force is delivered by the columns. In this study, the process of selecting connection details and the structural safety of the selected details are verified using the finite element analysis with focus given to the construction overview of the Cyclone Tower. However, the relersed methods of stress concentration are suggested and the performance of stress concentration relieves that it's suggested for the appropriate cap plate thickness and extended length.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.10
• /
• pp.947-952
• /
• 2006

It has been confirmed that the inner defect of insulator and the perfect diagnosis for aging are closely related to safe electric power transmission system and that the detection of accident and diagnosis technique turn out to be very important issues. But perfect diagnosis is difficult because discharge pattern is irregular. Thus, we investigated discharge pattern using the new distribution statistical models with cross-inked polyethylene(XLPE) specimens. Voltage was applied to power frequency by step method, and calibration of discharge was set to 50 pC. After the voltage was applied, it measured the discharge occurring during 10s. We investigated discharge pattern using the K-means analysis and Weibull function. We also investigated variation of centroid and shape parameter due to variation of voltage. As a result of analyzing K-means, it was confirmed that cluster including many object numbers was formed by the presence of void. And result of Weibull distribution, it was confirmed that shape parameter of discharge varied from 1.28 to 1.62 in no void specimens, and that shape parameter of discharge number varied from 1.28 to 1.62. In the void, shape parameter of discharge varied from 5.66 to 6.43, and shape parameter of discharge number varied from 5.05 to 5.08.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.199-203
• /
• 2005

One of the most important hydrological response characteristics is the lag time. It is well known as being under the influence of the morphometric properties of the basin, which could be expressed by catchment shape descriptors. In this paper, the geometric characteristics of an equivalent ellipse proposed by Moussa(2003) is applied for the lag time analysis. The lag time is obtained from the rainfall-runoff observed data by the method of moments suggested by Nash(1960) and the relationships between the basin morphometric properties and the lag time are discussed as applied to 3 catchments in Korea. Additionally, the shapes of equivalent ellipse are examined how they are transformed from upstream area to downstream one. As a result, the relationship between descriptors based on a equivalent ellipse a+b and $a+b+{\epsilon}OM$, and the lag time is shown to be close and the shape of ellipse is presented to approach a circle along the river downwards. Also, the notion of compactness which is used to express the shape of an irregular plan-form is tried to apply.

• Journal of the East Asian Society of Dietary Life
• /
• v.16 no.3
• /
• pp.272-280
• /
• 2006

This study examined the weight control and food habits in 160 obese children and 191 normal-weight children in 4th, 5th and 6th graders of some elementary schools in Gumi city. Regarding the subjects' self-recognition of their body shape, 27.8% of the normal weight group and 92.5% of the obese group acknowledged themselves to be obese. 58.9% of the normal weight group and 61.0% of the obese group were not satisfied with their own body shape and the difference between two groups was very small, 23.6% of the normal weight group and 87.5% of the obese group have tried to reduce weight. The main causative factor of weight gain that children themselves recognized was a sedentary life style. All the students showed a high rate of irregular and unbalanced diet. The obese children showed a significantly higher rate of skipping meals and eating meals faster than the normal weight children. More obese children disliked exercise, and did less excercise than the normal weight children. There was a negative correlation between the obesity index and the food habit score. In other words, they frequently skip a meals, eat in a hurry and dislike vegetables and dairy products. In addition, there was a positive correlation between the student's BMI and the parents' BMI. Overall, many normal weight children showed a high level of self-consciousness of being obese or underweight. Both groups showed a low degree of satisfaction with their own body shape. Therefore education for the distorted perception of body shape is needed because, even normal weight children have tried to reduce their weight. Obese children should be encouraged to exercise, not skip a meals and eat slowly. They also need a systematic education program on weight reduction and weight maintenance. Moreover, education on a healthy diet, healthy food habits, and healthy body shape are necessary for elementary school children.

• Journal of Drive and Control
• /
• v.17 no.4
• /
• pp.23-30
• /
• 2020

Driving on irregular and inclined roads using agricultural machinery such as spraying machines or trucks in orchards causes farmer casualties associated with the overturning of agricultural machinery. In addition, the harm to agricultural workers caused by the excessive inhalation of the scattered pesticide frequently occurs during pest control processes. To address these problems, we introduced precision agricultural technology that could selectively spray pesticides only where the fruit is present by recognizing the presence or shape of the fruit in the orchard. In this paper, a 16-channel LIDAR (VLP-16) made of Velodyne was used to identify the shape of fruit trees. Solenoid valves were attached to the end parts of 12 nozzles of the orchard spraying machine for on/off control. The smart spraying machine implemented in this way was mounted on a vehicle capable of autonomous travel and performed selective control depending upon the shape of the fruit trees while traveling in the orchards. This is expected to significantly reduce the amounts of pesticides used in orchards and production costs.

• Earthquakes and Structures
• /
• v.21 no.5
• /
• pp.551-562
• /
• 2021

In this study, the generalized intensity measure (IM) named I_Npg is analyzed. The recently proposed proxy of the spectral shape named N_pg is the base of this intensity measure, which is similar to the traditional N_p based on the spectral shape in terms of pseudo-acceleration; however, in this case the new generalized intensity measure can be defined through other types of spectral shapes such as those obtained with velocity, displacement, input energy, inelastic parameters and so on. It is shown that this IM is able to increase the efficiency in the prediction of nonlinear behavior of structures subjected to earthquake ground motions. For this work, the efficiency of two particular cases (based on acceleration and velocity) of the generalized I_Npg to predict the peak floor acceleration demands on steel frames under 30 earthquake ground motions with respect to the traditional spectral acceleration at first mode of vibration Sa(T₁) is compared. Additionally, a 3D reinforced concrete building and an irregular steel frame is used as a basis for comparison. It is concluded that the use of velocity and acceleration spectral shape increase the efficiency to predict peak floor accelerations in comparison with the traditional and most used around the world spectral acceleration at first mode of vibration.