• Wind and Structures
• /
• 제26권2호
• /
• pp.99-114
• /
• 2018

Due to shortage of land and architectural aesthetics, sometimes the buildings are constructed as unconventional in plan. The wind force acts differently according to the plan shape of the building. So, it is of utter importance to study wind force or, more specifically wind pressure on an unconventional plan shaped tall building. To address this issue, this paper demonstrates a comprehensive study on mean pressure coefficient of 'E' plan shaped tall building. This study has been carried out experimentally and numerically by wind tunnel test and computational fluid dynamics (CFD) simulation respectively. Mean wind pressures on all the faces of the building are predicted using wind tunnel test and CFD simulation varying wind incidence angles from $0^{\circ}$ to $180^{\circ}$ at an interval of $30^{\circ}$. The accuracy of the numerically predicted results are measured by comparing results predicted by CFD with experimental results and it seems to have a good agreement with wind tunnel results. Besides wind pressures, wind flow patterns are also obtained by CFD for all the wind incidence angles. These flow patterns predict the behavior of pressure variation on the different faces of the building. For better comparison of the results, pressure contours on all the faces are also predicted by both the methods. Finally, polynomial expressions as the sine and cosine function of wind angle are proposed for obtaining mean wind pressure coefficient on all the faces using Fourier series expansion. The accuracy of the fitted expansions are measured by sum square error, $R^2$ value and root mean square error.

• 대한세포병리학회지
• /
• 제7권2호
• /
• pp.207-212
• /
• 1996

Angiosarcoma of the bone is rare with an incidence of 0.13%. It may be solitary or multiple. Its cytologic findings by FNA have rarely been reported. We report a case of angiosarcoma of the rib in a 66 year-old man. FNA revealed single or clusters of round to oval shaped cells in a hemorrhagic and myxoid background. The large central nuclei had irregular nuclear membrane, chromatin clumping and prominent nucleoli. The cytoplasm was scanty with an eosinophilic distinct cytoplasmic border. Erythrophagocytosis by malignant cells was also found. Histopathologic examination confirmed the diagnosis of angiosarcoma revealing irregular and complex anastomosing vascular channels lined by malignant round tumor cells, protruding into the lumen. Immunohistochemical staining revealed diffuse strong positive reaction to factor VIII-related antigen and CD31.

• 한국산림과학회지
• /
• 제6권1호
• /
• pp.6-10
• /
• 1967

In the present paper author investigated the symptom, pathogenic fungus and pathogenicity of Endothia canker of Carpinus laxiflora in Korea, and made clear the indistinct discription on its pathogen in the past. 1. The pathogen is identified as Endothia fluens (Schw.) Shear et Stevens. The discription is recorded as follows: Stromata cortical, erumpent, spherical or conical, outer yellowish-brown and inner yellowish, 0.5 to 2.5 mm in diameter; perithecia irregularly embeded in the bottom of stroma, 7 to 23 in a stroma usually spherical to elliptical or irregular, 235 to $370{\mu}$ in diameter, with black slender necks; each neck open the papilliate ostiole to the surface, about 250 to $400{\mu}$ in length; asci clavate or fusoid, colorless, 31.16 to 42.64 by 6.54 to $8.20{\mu}$ in size, average 37.02 by $6.84{\mu}$, with 8 ascospores in double line; ascospores elliptical, ovate or cylindrical, with rounded ends, hyaline, 1-septate, not constrict at the septum, 6.51 to 9.30 by 3.16 to $3.72{\mu}$, average 7.61 by $3.44{\mu}$ in size; pycnidia formed abundantly in stroma. spherical at first but later irregular large cavity by fussing each other; pycnospores oblong or rod-shaped, hyaline, non-septate, 3.8 by $1.9{\mu}$ in size; spore-horn formed abundantly under moist condition. 2. The pathogen is wound parasite invading the hosts through the wound. But after the infection is established, expanding the disease lesion is swiftly vigorus.

• 대한토목학회논문집
• /
• 제34권2호
• /
• pp.655-666
• /
• 2014

최근 건설공사에 디자인적 요소가 많이 강조 되면서 비정형 구조물이 증가하고 있다. 이에 따라 여러 소프트웨어들이 BIM환경에서 3D객체의 물량산출기능을 제공하고 있지만, 솔리드 모델기반 정형화된 객체의 제한된 물량산출기능을 제공하고 있다. 비정형 토목 구조물과 같이 수직적 단면형상의 변화정도가 심한 3D객체는 다수의 곡면 표현을 포함하므로 솔리드로 모델링하는데 많은 노력이 필요하며, 해당 모델이 포함한 기하정보의 수가 방대하기 때문에 특정한 단면에 대한 기하정보를 추출하기가 용이치 않다. 이러한 이유로 비정형 구조물을 솔리드 모델의 3D객체로 표현하는 데에는 한계가 따른다. 반면 서피스 모델은 비정형 객체의 형상을 비교적 자유로이 표현할 수 있고, 점, 선, 면으로만 이루어진 모델이기 때문에 정보의 용량이 적다. 따라서 대부분이 복잡한 형태로 방대한 양의 설계작업을 필요로 하는 토목공사의 설계정보 용량을 고려한다면, 서피스 모델링은 토목구조물 설계와 물량산출에 유리한 모델링 방법이 될 수 있다. 본 연구는 건설공사 비정형 구조물의 설계 작업에 유리한 서피스 모델기반의 3D객체를 이용한 비정형 객체의 물량산출 알고리즘을 제시하는 데 목적이 있다. 제시된 방법론은 사례적용을 통하여 수계산 및 기존 솔리드방식의 물량산출결과와 비교하여 정확성을 검증하고 있다.

• Radiation Oncology Journal
• /
• 제9권2호
• /
• pp.343-350
• /
• 1991

종양모양에 거의 일치하는 선량분포를 얻기위해 다층부정형필터를 이용하는 방법을 보였으며, 필터의 재질은 Lipowitz (일명 cerrobend alloy) 금속체를 이용하였다. 선속내 필터의 놓임은 일차선의 감쇄와 함께 조직내 산란선 기여율의 변화가 예상되므로 필터의 두께에 따른 SMR의 변화가 계산에 이용되어야 된다. 이에 본 연구의 계산선량은 실측치의 $3\%$이내에서 잘 일치됨을 알 수 있었다. 다층부정형필터를 이용한 펜톰의 원호조사의 선량평 가는 동일 필터에 의한 고정조사의 선량분포가 적용되었으며, 가상종양에 거의 일치하는 선량분포를 얻을수 있었다. 한편, 컴퓨터모의계산된 선량과 열발광산량계(teflon-embedded TLD)의 실측선량은 비교적${\pm}5\%$ 범위내에서 잘 일치됨을 알 수 있었으며, 이 치료방법은 현재 차폐체로 많이 이용되고 있는 Lipowitz 금속체를 사용함으로써 보다 쉽게 응용되어질 것으로 생각된다.

• 대한건축학회논문집:계획계
• /
• 제35권11호
• /
• pp.13-24
• /
• 2019

The history of tall buildings begins in 1853with the development of elevators. After the Industrial Revolution of the 18th century, the development of high-rise buildings will be carried out in earnest as a means to efficiently use the limited land of cities. The development, which began around Chicago, extended over a long period of time to Asia, maximizing the high competition. However, in the 2000s, not only was it high due to the development of construction and digital technology, but it also became competitive in eco-friendly elements and unstructured forms. High-rise building plans that have gained elemental and morphological diversity are completed by the interrelationships of various plans. Among them, it is important that the core plan has a reasonable approach from the initial planning stage as the basis for the vertical copper plan linking vertically-intensive functions. The cores should be designed to be clear and adequately responsive to changes in the shape of the building. This study aims to provide designers with a reasonable understanding of core planning by identifying core characteristics of irregular high-rise. In particular, we want to analyze the shape of the ground layer core and the relationship between the area and components of the ground layer core. The analysis results are as follows, classified according to the type or use of the building. Of the atypical forms composed of double bending, the TAPER-Curve and TWIST forms are the most distributed, and the plane and core shapes of the ground floor are the most commonly used. Based on the analysis of the validity of the ground floor cores by shape of the cores, the most commonly used forms for core shapes in the planning of the atypical high-rise are square, circular and Oval, and the most efficient oval cores and relatively inefficient ones when planned.

• 치과방사선
• /
• 제25권1호
• /
• pp.89-97
• /
• 1995

The radiographic findings of soft tissue calcification in the oral and maxillofacial area was analysed using panoramic, skull P-A and intraoral radiographs in 250 patients. The obtained results were as follows ; 1. Salivary stone had the highest rate of occurrence at 46％(116 cases), followed by lymph node calcification(97 cases), phleholith(21 cases), multiple miliary osteoma(15 cases), antrolith(l case), vessel calcification(l case) and cysticercosis(1 case). 2. The prevalence of salivary stone was slightly higher in females, on the right side and in the middle-aged group and was especially higher in the submandibular gland(83％). The majority of them were round-shaped, homogeneously radiopaque and associated with sialodochitis. 3. The prevalence of lymph node calcification was higher in the female and old-aged group. Irregular shape and radiopaque bodies were seen in the cervical area, bilaterally. 4. The prevalence of phlebolith was slightly higher in the male, and the third decade group. The radiopaque bodies were 4-8 mm in diameter and had laminated appearance. 5. The prevalence of multiple miliary osteoma was higher in old-aged females. The numerous doughnut-shaped radiopaque bodies, sized 2-4 mm in diameter, were seen bilaterally in the cheek and were usually associated with the edentulous ridge.

• 한국세라믹학회지
• /
• 제33권1호
• /
• pp.56-64
• /
• 1996

A large amount of papers about the cubic-to-tetragonal phase transition the ferroelectric domain structures of the BaTiO3 were already reported but there exist still some needs to observe the domain behaviors directly. In this study the domain structures of the tinned plates prepared from ta single crystal grown by the TSSG technique were observed using a polarizing microscope TE and X-ray topography. The spatial relation be-tween the orientation states of domains was investigated and the effects of external stresses and electric fields on the behaviors of ferroelectric and ferroelastic domains were studied. All the 90$^{\circ}$walls cut off in the crystal are the wedge shaped lamellar domains and all the straight boundaries in the observed domain patte군 can be interpreted as the head-to-tail 90$^{\circ}$walls. The irregular overlapped boundaries commonly observed by using a polarizing microscope and X-ray topography are complex combinations of well-known 90$^{\circ}$walls and are domain walls were predominant and were stabilized after surface polishing. In the paraelectric phase region the domain walls vanished but the residual surface strain patterns could be seen at the same positions of the stabilized 90$^{\circ}$a-a walls in the tetragonal phase region, These stabilized walls resulted from the surface strain had a memory effect in domain formation during the repeated phase transitions and could notr be affected by an external electtric field.

• 한국분말재료학회지
• /
• 제3권3호
• /
• pp.181-187
• /
• 1996

Cobalt and VC powders were ball milled with M2 grade high speed steel powders under various ball to powder ratios. The powders milled under higher ball to powder ratio become finer, more irregular and have a broader size distribution, and thus possess a lower compressibility and a better sinterability regarding densification. Increasing the ball to powder ratio lowered the sintering temperature to obtain the density level necessary to isolate all the pores. Lowering the sintering temperature is very critical to maintain fine microstructure since grain and carbide coarsening are accelerated by higher sintering temperature due to more liquid phase formation. The powders obtained by ball milling at 20 to 1 ratio has the lowest compressibility but has the best sinterability, almost compatible to unmilled pure M2 powders. A sintered body over 97% theoretical density with fine microstructures having average grain size of ~10 microns was obtained from the powder by sintering at 1260 $^{\circ}C$ for 1 hour in vacuum. XRD results indicate that two types of carbides are mainly present in the sintered structure, MC and $M_{6}C$ type. The MC type carbides are more or less round shaped and mainly located at the grain boundaries whereas the $M_{6}C$ type are angular shaped and mainly located inside the grains.

• Geomechanics and Engineering
• /
• 제29권3호
• /
• pp.339-348
• /
• 2022

The bored tunneling method is generally preferred for urban tunnel construction, However the cut & cover tunnel is still necessary for special conditions, such as metro station and access structures. In some case, deep excavation for cut & cover construction is planed of irregular and unusual shape, as a consequence, the convex and concave corner is often encountered during that excavation. In particular, discontinuity or imbalance of the support structure in the convex corner can lead to collapse, which may result in damages and casualties. In this study, the behavior of the convex corner of retaining structure were investigated using 3-dimensional numerical models established to be able to simulate the split-shaped behavior of convex corners. To improve the stability in the vicinity of the convex corner, several stabilizing measures were proposed and estimated numerically. It is found that linking two discretized wales at the convex corner can effectively perform the control of deformation. Furthermore, it was also confirmed that the stabilizing measures can be enhanced when the tie-material linking two discretized wales is installed at the depth of the maximum wall deflection.