• Korean Journal of Metals and Materials
• /
• v.50 no.8
• /
• pp.583-589
• /
• 2012

This work is concerned with a statistical approach to the life prediction on irradiation-assisted stress corrosion cracking (IASCC) of stainless steel (SS) for core internals of a pressurized water reactor (PWR). The previous results of the time-to-failure of IASCC measured on neutron-irradiated stainless steel components were statistically analyzed in terms of stress and irradiation. The accelerating life testing model of IASCC of cold worked Type 316 SS was established based on an inverse power model with two stress-variables, the applied stress and irradiation dose. Considering the variation of the yield strength and applied stress with the irradiation dose in the model, the remaining life of the baffle former bolt was statistically predicted during operation under complex environments of stress and irradiation.

• Nuclear Engineering and Technology
• /
• v.55 no.8
• /
• pp.2823-2834
• /
• 2023

Austenitic stainless steel welds (ASSWs) of nuclear components undergo aging-related degradations caused by high temperature and neutron radiation. Since irradiation leads to the change of material characteristics, relevant quantification is important for long-term operation, but limitations exist. Although ion irradiation is utilized to emulate neutron irradiation, its penetration depth is too shallow to measure bulk properties. In this study, a systematic approach was suggested to estimate mechanical properties of ion irradiated 308 ASSW. First of all, weld specimens were irradiated by 2 MeV proton to 1 and 10 dpa. Microstructure evolutions due to irradiation in δ-ferrite and austenite phases were characterized and micropillar compression tests were performed. In succession, dislocation density based stress-strain (S-S) relationships and quantification models of irradiation defects were adopted to define phases in finite element analyses. Resultant microscopic S-S curves were compared to verify material parameters. Finally, macroscopic behaviors were calculated by multiscale simulations using real microstructure based representative volume element (RVE). Validity of the approach was verified for the unirradiated specimens such that the estimated S-S curves and 0.2% offset yield strengths (YSs) which was 363.14 MPa were in 10% agreement with test. For irradiated specimens, the estimated YS were 917.41 MPa in 9% agreement.

• Journal of Marine Bioscience and Biotechnology
• /
• v.12 no.1
• /
• pp.66-74
• /
• 2020

Marine algae contain a variety of substances, such as mycosporine-like amino acids, which can defend against UV irradiation. Among them, Porphyra-334 derived from Porphyra yezoensis is attracting attention as a novel active ingredient for anti-aging cosmetics because of its excellent anti-oxidative, anti-inflammatory, and wound-healing properties through promoting skin cell migration. In this study, a process using direct current (DC) for increasing the yield of large-scale purification of Porphyra-334 was developed. When DC was applied to obtain Porphyra-334 efficiently, the purification time was shortened by approximately 1/4 compared with the process wherein DC was not applied; moreover, the yield of purification was improved.

• the MEAT Journal
• /
• s.35 winter
• /
• pp.46-55
• /
• 2008

The microbiological and physicochemical properties of irradiated (2 kGy) or non-irradiated fermented meats processed with or without a commercial starter culture were evaluated during fermentation and aging. The pH of irradiated (2 kGy) fermented meats with starter cultures dramatically decreased during fermentation and aging (p<0.05), and the final pH was 4.25. The total aerobic counts and lactic acid bacteria counts reflected the addition of the starter culture. As the fermentation progressed, the total aerobic counts closely paralleled the lactic acid bacteria counts. The TBARS values of irradiated fermented meats increased regardless of the treatment during fermentation and aging. These results show that the irradiated(electron-beam) meat/fat resulted in the reduction of the total microbes and survives lactic acid bacteria. The use of starter cultures in meat batters post-irradiation may be useful for the production of fermented meats.

• Food Science of Animal Resources
• /
• v.27 no.3
• /
• pp.308-313
• /
• 2007

The microbiological and physicochemical properties of irradiated (2 kGy) or non-irradiated fermented meats processed with or without a commercial starter culture were evaluated during fermentation and aging. The pH of irradiated (2 kGy) fermented meats with starter cultures dramatically decreased during fermentation and aging (p<0.05), and the final pH was 4.25. The total aerobic counts and lactic acid bacteria counts reflected the addition of the starter culture. As the fermentation progressed, the total aerobic counts closely paralleled the lactic acid bacteria counts. The TBARS values of irradiated fermented meats increased regardless of the treatment during fermentation and aging. These results show that the irradiated (electron-beam) meat/fat resulted in the reduction of the total microbes and survives lactic acid bacteria. The use of starter cultures in meat batters post-irradiation may be useful for the production of fermented meats.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1993.11a
• /
• pp.80-84
• /
• 1993

In this research, we studied the variation of the dielectric loss absorption of the dielectric loss absorption of the sample according with the change to $\^$60/Co-${\gamma}$-ray irradiation dose of the influence of temperature and applied voltage. In order to investigate the effect of irradiation oriented polypropylene film, we have observed dissipation factor within the temperature range of 30∼130 [$^{\circ}C$] and voltage range of 100∼250$^{\circ}C$ [V]. As for the dependency of temperature by dissipation factor, the ${\alpha}$-peak which appears at high temperature increases accordingly to the increasement of irradiation dose which is contributed by the crystal region and moves towards the high temperature. The ${\beta}$-peak which appears at low temperature is origined from dipoles and molecular motions in the amorphous region. As for the dependency of voltage by tan$\delta$, at low temperature the peak of the tan$\delta$, at low temperature the peak of the tan$\delta$ shifts accordingly to the increasement of irradiation dose towards the high temperature region.

• Korean Journal of Food Science and Technology
• /
• v.31 no.4
• /
• pp.1005-1010
• /
• 1999

To study the shortening of rigor mortis and changes in the morphological properties of gamma-irradiated pre-rigor bovine muscle (M). Sternomandibularis during post mortem, this experiment was performed with a test of shear force and the observation of the ultrastucture of raw muscle. The time elapsed until maximum shear force values was shortened by gamma irradiation, depending upon the dose. The release of rigor mortis started earlier than control (non-irradiated muscle). A shortening of the length of the Z-line and the maintenance of the sarcomere length by gamma irradiation was observed. The breakdown of the perimysium of muscle bundles was observed more in irradiated samples than in the control. In conclusion, it is considered that gamma irradiation on pre-rigor beef shortens aging-period, improves tenderness and enhances the beef quality.

• The Journal of Korean Academy of Prosthodontics
• /
• v.46 no.6
• /
• pp.577-585
• /
• 2008

STATEMENT OF PROBLEM: The discoloration of anterior teeth restoration is one of the material problems demanding retreatment. OBJECTIVES: To evaluate the color stability and affecting factors on esthetic restorative materials when subjected to accelerated aging. MATERIAL AND METHODS: This study was conducted using porcelain disks (IPS Empress 2-glazed, IPS Empress 2-polished), direct restorative resin disks (SYNERGY Duo) and indirect restorative resin disks (Sinfony, TESCERA ATL). Accelerated aging was done by precipitating the specimens in 38.C distilled water and irradiating with xenon light, and the total irradiation was 397.98 KJ/mm. Color and microhardness change of the specimens were measured before accelerated aging and after 100 hours, 200 hours and 300 hours of accelerated aging, and Surface of the specimens were examined with SEM before and after 300 hours of accelerated aging. RESULTS: 1. After 300 hours' accelerated aging, a ${\Delta}E$ value was 3.3 or lower in IPS Empress 2-glazed, IPS Empress 2-polished and Sinfony. 2. After 300 hours' accelerated aging, gloss was lost and surface changes including microcracks were observed in TESCERA ATL and SYNERGY Duo, and color changes of them ranged between 3.58 and 6.40 ${\Delta}E$ units. 3. During 300 hours' accelerated aging, the microhardness of surface was increased by 3.21 - 19.64% in all kinds of composites resin. CONCLUSION: After 300 hours' accelerated aging, SEM images IPS Empress 2-glazed, IPS Empress 2-polished and Sinfony showed little morphological change and their color changes were considered to be clinically acceptable. And there was significant correlation between microhardness changes and color changes of composites (P < .05).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.05b
• /
• pp.57-60
• /
• 2001

This study describes the effect of $\tau$ -ray irradiation on the properties of insulation materials for low voltage cables in a nuclear power plant. The radiation effects were characterized by measuring OIT, FTIR, electrical properties of the irradiated specimens. As a result, they showed the decrease of OIT and the increase of chemical structural defects with the increase of $\tau$ -ray amount

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.9 no.1
• /
• pp.20-24
• /
• 2013

Reactor Vessel Internals(RVIs), which are installed within the reactor pressure vessel and support the fuel assembly, take responsibility for safety of reactor core. In operating Nuclear Power Plants(NPPs), the RVIs have been exposed to severe conditions such as neutron irradiation, high temperature, high pressure, and high velocity of coolant flow and have degraded by materials aging with long-term operation. Therefore, the effective aging management plan and the appropriate regulatory requirements are necessary to maintain the integrity of RVIs. The purpose of this paper is to provide a review guide for Periodic Safety Review(PSR) of RVIs in presurized water reactor. The review guide is developed based on the revised review guides and reports established from IAEA and USNRC, and the analysis results of design characteristics, aging mechanisms, and operating experiences of RVIs in domestic and international NPPs. Consequently, the developed review guide for PSR of RVIs is expected to contribute an overall strategy and standard for the PSR of RVIs.