• Title/Summary/Keyword: Iron phthalocyanine

Search Result 15, Processing Time 0.021 seconds

Adsorption of Amine and Sulfur Compounds by Iron Phthalocyanine Derivatives (철 프탈로시아닌 유도체에 의한 아민 및 황 화합물의 흡착)

  • Lee, Jeong-Se;Park, Jin-Do;Lee, Hak-Sung
    • Journal of Korean Society for Atmospheric Environment
    • /
    • v.23 no.5
    • /
    • pp.575-584
    • /
    • 2007
  • The adsorption capability of iron phthalocyanine derivatives were investigated by means of X-ray diffractometor (XRD), IR (infrared) spectroscopy, scanning electron microscopy (SEM) and temperature programmed desorption (TPD). According to TPD results, iron phthalocyanine derivatives showed two desorption peaks at low temperature ($100{\sim}150^{\circ}C$) and high temperature ($350{\sim}400^{\circ}C$) indicating that there were two kinds of acidities. Tetracarboxylic iron phthalocyanine (Fe-TCPC) have a stronger desorption peak (chemical adsorption) at the high temperature and a weaker desorption peak (physical adsorption) at the low temperature than iron phthalocyanine (Fe-PC). The specific surface areas of Fe-TCPC and Fe-PC were $26.46\;m^2/g\;and\;11.77\;m^2/g$, respectively. The pore volumes of Fe-TCPC and Fe-PC were $0.14\;cm^3/g\;and\;0.06\;cm^3/g$, respectively. The adsorption capability of triethyl amine calculated by breakthrough curve at 220 ppm of equilibrium concentration was 29.2 mmoL/g for Fe-TCPC and 0.8 mmoL/g for Fe-PC. The removal efficiency of dimethyl sulfide of Fe-TCPC and Fe-PC in batch experiment of 225 ppm of initial concentration were 44.9% and 28.9%, respectively. The removal efficiency of trimethyl amine of Fe-TCPC and Fe-PC in batch experiment of 118 ppm of initial concentration were approximately 100.0% and 33.9%, respectively.

Organic light emitting diodes using Iron(II) and Metal-free Phthalocyanine (Iron(II)과 Metal-free Phthalocyanine의 결정구조 변화에 따르는 유기 발광소자의 발광 특성)

  • 임은주;한우미;이정윤;김명식;이기진
    • Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
    • /
    • 2001.07a
    • /
    • pp.947-950
    • /
    • 2001
  • We report the characteristics of organic light emitting diodes (OLEDS) by controlling the carrier mobility according to the crystalline of Iron(II) Phthalocyanine(Fe-Pc) and metal-free Phthalocyanine (H$_2$-Pc). In order to change the recombination zone, we controlled the hole mobility by changing the crystal structures of Fe-Pc and H$_2$-Pc. OLEDs were constructed with ITO/Fe-Pc/triphenyl-diamine (TPD)/tris-(8-hydroxyquinoline)aluminum (Alq$_3$)/Al and ITO/H$_2$-Pc/triphenyl-diamine (TPD)/tris-(8-hydroxyquinoline)aluminum (Alq$_3$)/Al. The electroluminescent properties were changed according to the heat-treatments of Fe-Pc and H$_2$-Pc. We observed that the recombination zone and the carrier mobility were changed as the higher occupied molecular orbital levels of Fe-Pc and H$_2$-Pc decreased.

  • PDF

Preparation of Novel Iron Phthalocyanine Containing Reactive Groups and its Deodorizing Property on Cellulose

  • Kim, Eun-Mi;Choi, Jae-Hong
    • Textile Coloration and Finishing
    • /
    • v.25 no.4
    • /
    • pp.247-253
    • /
    • 2013
  • The enzyme-like catalytic functions of metal complex phthalocyanine derivatives those containing carboxylic acid groups could be applied as odor-removing systems and antibacterial systems. Pyromellitic dianhydride and 4-nitrophthalimide were used as starting material for synthesizing dinitro-tetracarboxylic acid iron phthalocyanine(compound 1). Then diamino-tetracarboxylic phthalocyanine(compound 2) was obtained by reduction of compound 1. For the formation of covalent bond with cellulose fiber, cyanuric chloride was introduced to the amino group of compound 2 by condensation reaction compound 3. The exhaustion method was employed for adsorbing compound 3 on cotton fiber. K/S values of each fabrics were measured by a CCM system and deodorizing rates were tested by a detector tube method for ammonia gas. K/S values of treated cotton fiber with compound 3 were arranged from 2.1 to 4.2 at $90^{\circ}C$ of exhaustion temperature. Deodorizing rates provided result of 81%, 84%, 88%, 91%, by passing time of 30 min, 60 min, 90 min, 120 min, respectively.

Screening of Photosensitizer for Photodynamic Therapy (광역동 항암치료를 위한 광과민제 스크리닝 연구)

  • Kim, So-Young;Yoo, Gui-Jae;Park, Keun-Hyoung;Lim, Byung-Lak;Kim, Shi-Surk;Yom, Heng-Cherl;Chae, Hee-Jeong
    • KSBB Journal
    • /
    • v.22 no.5
    • /
    • pp.318-321
    • /
    • 2007
  • Photodynamic therapy (PDT) is a targeted-tumor treatment system using a photosensitizer, light and oxygen to treat malignant tumor. We have investigated the cytotoxicity of 4 types of phthalocyanine derivative (silver phthalocyanine, iron (III) phthalocyanine, copper (II) phthalocyanine, nickel (II) phthalocyanine) against lung and breast cancers based on photodynamic therapy. As a result, phthalocyanine derivatives indicated a higher anticancer activity on a breast cancer cell line. Among the tested phthalocyanines, silver phthalocyanine (AgPc) showed a lower cytotoxicity against a normal cell line. In addition AgPc gave a good color characteristic when it is solubilized in water. Finally AgPc was selected as a potential antitumor agent for breast cancer.

In situ Structural Investigation of Iron Phthalocyanine Monolayer Adsorbed on Electrode Surface by X-ray Absorption Fine Structure

  • Kim, Seong Hyeon;Toshiaki Ohta;Gang, Gwang Hun
    • Bulletin of the Korean Chemical Society
    • /
    • v.21 no.6
    • /
    • pp.588-594
    • /
    • 2000
  • Structural changes of an iron phthalocyanine (FePC) monolayer induced by adsorption and externally applied potential on high area carbon surface have been investigated in situ by iron K-edge X-ray absorption fine structure (XAFS) in 0.5 M $H_2S0_4.$ Fine structures shown in the X-ray absorption near edge structure (XANES) for microcrystalline FePC decreased upon adsorption and further diminished under electrochemical conditions. Fe(II)PC(-2) showed a 1s ${\rightarrow}$ 4p transition as poorly resolved shoulder to the main absorption edge rather than a distinct peak and a weak 1s ${\rightarrow}$ 3d transition. The absorption edge position measured at half maximum was shifted from 7121.8 eV for Fe(lI)PC(-2) to 7124.8 eV for $[Fe(III)PC(-2)]^+$ as well as the 1s ${\rightarrow}$ 3d pre-edge peak being slightly enhanced. However, essentially no absorption edge shift was observed by the 1-electron reduction of Fe(Il)PC(-2), indicating that the species formed is $[Fe(II)PC(-3)]^-$. Structural parameters were obtained by analyzing extended X-ray absorption fine structure (EXAFS) oscillations with theoretical phases and amplitudes calculated from FEFF 6.01 using multiple-scattering theory. When applied to the powder FePC, the average iron-to-phthalocyanine nitrogen distance, d(Fe-$N_p$) and the coordination number were found to be 1.933 $\AA$ and 3.2, respectively, and these values are the same, within experimental error, as those reported ( $1.927\AA$ and 4). Virtually no structural changes were found upon adsorption except for the increased Debye-Wailer factor of $0.005\AA^2$ from $0.003\AA^2.$ Oxidation of Fe(II)PC(-2) to $[Fe(III)PC(-2)]^+$ yielded an increased d(Fe-Np) (1 $.98\AA)$ and Debye-Wailer factor $(0.005\AA^2).$ The formation of $[Fe(II)PC(-3)]^-$, however, produced a shorter d(Fe-$N_p$) of $1.91\AA$ the same as that of crystalline FePC within experimental error, and about the same DebyeWaller $factor(0.006\AA^2)$.

Continuous electricity generation in microbial fuel cells with non-precious metal catalysts (비귀금속촉매 미생물연료전지의 연속운전을 통한 전기 생산)

  • Moon, Chungman;Kim, Dong-Hoon
    • Journal of the Korea Organic Resources Recycling Association
    • /
    • v.23 no.1
    • /
    • pp.45-51
    • /
    • 2015
  • In this study, continuous microbial fuel cells (MFCs) were operated using non-precious metal catalysts such as iron(II) phthalocyanine (FePc) and cobalt tetramethoxyphenylporphyrin (CoTMPP)) as alternative cathode catalysts for platinum. To evaluate MFCs performance, operational conditions of organic loading rate (OLR) (0.5~3 g COD/L/d) and hydraulic retention rate (HRT) (0.25~1 day) were changed. Power density of MFCs were determined by cathode electrode performance. The maximum power density was $3.3W/m^3$ with platinum at OLR 3 g COD/L/d. Given each HRTs at 1 g COD/L/d, FePc showed to be a better alternative for platinum than CoTMPP because the power density of MFC with FePc was similar to that of MFC with platinum. CoTMPP catalyst, however, showed the lowest power density due to increase of internal resistance during continuous operation.