• Transactions of the Korean hydrogen and new energy society
• /
• v.30 no.2
• /
• pp.111-118
• /
• 2019

Greenhouse gas emissions have a profound effect on global warming. Various environmental regulations have been introduced to reduce the emissions. The largest amount of greenhouse gases, including carbon dioxide, is produced in the steel industry. To decrease carbon dioxide emission, hydrogen-based iron oxide reduction, which can replace carbon-based reduction has received a great attention. Iron production generates various by-product gases, such as cokes oven gas (COG), blast furnace gas (BFG), and Linz-Donawitz gas (LDG). In particular, COG, due to its high concentrations of hydrogen and methane, can be reformed to become a major source of hydrogen for reducing iron oxide. Nevertheless, continuous COG cannot be supplied under actual operation condition of steel industry. To solve this problem, this study proposed to use two alternative COG-based fuel mixtures; one with natural gas and the other with biogas. Reforming study on two types of mixed gas were carried out to evaluate catalyst performance under a variety of operating conditions. In addition, methane conversion and product composition were investigated both theoretically and experimentally.

• Journal of Wetlands Research
• /
• v.17 no.1
• /
• pp.75-79
• /
• 2015

DIWS system was introduced to treat HCl gas from the scrubber of iron and steel industry according as the regulation of air quality is expected to be changed to 2ppm. pH of condensed water at stack was increased to 6.0. While 13.3ppm of inflow HCl was introduced to DIWS system, the average exhaust gas was 0.43ppm with 96.9% of removal efficiency. Compared with HCl data of TMS, the stable removal efficiency was shown in DIWS system, but the phenomenon of data hunting was also observed with different types of TMS apparatus.

• Journal of Wetlands Research
• /
• v.25 no.4
• /
• pp.291-296
• /
• 2023

DIWS system was employed to treat hydrochloric acid gas from cold rolling mill process of iron and steel industry. Chlorine gas generated from the acid regeneration system was combined with hydrogen gas and hydrogen chloride gas was increased to 50%. After the injection of Na₂S₂O₃ to remove chlorine gas, the removal of hydrogen chloride was stably kept 87.5~88.8%, where the inflow was 13.1~13.4ppm and the outflow was 1.5~1.7ppm. DIWS system can be recommended for the real iron and steel plant because it was stably maintained not only the air emission standards but also the reduction of chemical usage.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.10 no.1
• /
• pp.45-57
• /
• 2000

Results of environmental monitoring for 35 steel industry welders exposed to manganese and chromium fume were evaluated. Efficiency of respiratory protectors, welding face shields and local exhaust ventilation were also evaluated to establish more efficient preventive measures that can protect welders from occupational disease as related to welding fume. The results are as follows; 1. Total fume from $CO_2$ arc welding with mild steel occurred 1.5 to 2.2 times more than that from shielded metal arc welding. Chromium and nickel fume from welding with stainless steel occurred 27 to 59 times and 18 to 30 times, respectively, than those with mild steel. 2. Proportions of water-soluble chromium(VI) and insoluble chromium(VI) Compare to total chromium occurring from $CO_2$ arc welding with stainless steel were 10.5% and 8.7%, respectively, while those with mild steel were 57.1 to 63.2% and 31.6 to 38.1%, respectively. 3. The efficiencies of 4 types of respiratory protectors to reduce welding fume exposure were evaluated as 54.4 to 64.4%. 4. The reducing effect of head type welding face shield was 67.6%, and that of hand type welding face shield was 58.5%. The highest reducing effect was shown in air supply welding face shield as 99.2%, although it is not convenient to wear. 5. When welding face shield and respiratory protectors were worn together, the reducing efficiency increased to 79.0 to 87.5%. 6. When local exhaust ventilation was installed in workplace, the reducing efficiencies varied from 31.5 to 73.1% according to the types of welding.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.34 no.4
• /
• pp.1-14
• /
• 2009

This study empirically tests post-M&A performance through competitiveness variables based on extensive firm-based panel data over the past 26 years in the world steel industry. Different measures of profitability, productivity, efficiency, market share, and growth rate which are considered as critical factors of competitiveness are used in the analysis. In particular, this paper tries to separate M&A samples into two cases; horizontal integration (between steel makers) and vertical integration (between steel makers and iron ore suppliers/steel consuming firms). Merged firms show significant improvement in competitiveness relative to other individual firms in the steel industry.

• Resources Recycling
• /
• v.6 no.2
• /
• pp.29-41
• /
• 1997

• Journal of Welding and Joining
• /
• v.32 no.5
• /
• pp.65-71
• /
• 2014

Atmospheric plasma spraying (APS) is world-widely used process in the automotive industry as a method to provide wear resistance coatings for engine cylinder bore, using various materials. The weight of engine blocks can be considerably decreased by removing cast iron liners, which can finally result in the improvement of fuel efficiency. In this study, five kinds of powder materials, 1.2C steel powder and 1.2C steel powder mixed with 5, 10, 15, 20 wt.%. molybdenum powder, were deposited by atmospheric plasma spraying in order to investigate the effect of molybdenum on the wear resistance of coatings. Microstructural analysis showed that molybdenum splats were well distributed in 1.2C steel matrix with intimate bonding. The molybdenum added coatings showed better tribological properties than 1.2C steel coating. However, above the 15 wt.%. blending fraction, wear resistance was somewhat degraded with poor roughness of worn surface due to the brittle fracture occurred in molybdenum splats. Consequently, compared to conventional liner material, gray cast iron, 10 wt. pct. molybdenum blended 1.2C steel coating showed much better tribological properties and therefore it looks very feasible to replace gray cast iron liner.

• Journal of Korean Institute of Industrial Engineers
• /
• v.30 no.3
• /
• pp.181-189
• /
• 2004

The purpose of this study was to investigate the effects of sleep/wake behavior for shift workers in the iron and steel industry using wrist actigraph for 59 male workers on a continuous full-day three-team three-shift system of backward rotation including on-duty and off-duty periods. The wrist actigraph data were recorded for 15 days (l shift cycle) for each subject. The sleep length at home during night shift decreased significantly as compared to the morning or evening shifts. The night shift nap length increased significantly in all sections as compared to the morning or evening shifts. The nap length in the Steel Manufacturing Process and Rolling Process during night shift decreased significantly as compared to the Machine Maintenance Section, the Forwarding of Products Section, and the Field Management Section. However, the sleep length at home while off-duty period increased significantly. The percentage of nap length during night shift in the Rolling Process, Steel Manufacture Process, and the other three types of jobs was 16.0%, 20.4%, and about 50.0%, respectively. The nap length during night shift for the above 50 year olds increased significantly as compared to the below 50 year olds. Finally, we discussed the role of nap-taking during the burden on night shift workers and the increased difficulty in continuing their job.

• Resources Recycling
• /
• v.24 no.3
• /
• pp.34-43
• /
• 2015

Raw materials in steel industry decide on the productivity, quality and price competitiveness. Utilizing iron-containing by-products as raw materials for steel products can save the cost of cleaning up iron-containing by-products and solve environmental issues. Iron-containing by-products have a small particle size. If they are directly inserted in a steel making process, it cause a problem such as poor heat flow and scattering. To solve these problems and induce the additional reduction, study concern with iron ore-coal mixed briquette technique are conducted by many researchers. In this paper, method of making carbon composite briquette iron(CCBI) using iron-containing by-products was studied. The effect of composition of Fe-containing process wastes, reducing agent, flux and binder on formability of CCBI (carbon composite briquette iron) was measured.

• Asia-Pacific Journal of Business
• /
• v.11 no.2
• /
• pp.27-43
• /
• 2020

Purpose - This study explores the impact of the real estate industry on related industries for the perspective of Chinese steel companies. Design/methodology/approach - The impact of housing prices on the 41 listed steel companies' performance was analyzed by using the panel data model. We used two kinds of housing price indexes that are set in the panel data models to estimate the range of the real estate market, driving the performance growth of steel listed companies. Moreover, the net profit of steel companies is used as the dependent variable. To test the stability of the model, ROA used as a dependent variable for the robustness test. Also, to avoid the time trend of housing prices, this paper selects the growth rate of housing prices as the primary research variable. After Fisher-type testings, there is no unit root problem in both independent and dependent variables. Findings - The results indicated that the rise in the housing price has a positive influence on the steel company performance. When the housing price increases by 1%, the net profit of steel enterprises will increase by 5 to 20 million yuan. Research implications or Originality - In this paper, empirical data at the micro-level and panel model are used to quantify China's real estate industry's driving effect on the iron and steel industry, providing evidence from the microdata level. It helps us to understand further the status and role of China's real estate industry in the economic structure.