• Environmental and Resource Economics Review
• /
• v.19 no.2
• /
• pp.341-360
• /
• 2010

The goal of this study is to forecast the scales of seaborne trade of iron ore and coal. It is assumed that the seaborne trade of iron ore is the function of two independent variables(crude steel production, world GDP) and the seaborne trade of coal is the function of two independent variables(crude steel production, world electricity generation). The result shows that the regressions of two functions are statistically significant respectively. As the results of forecasting, the seaborne trade of iron ore in 2010 may be 892 million tons which is increased 5.1% compare to the level of 2009. Also the seaborne trade of coal in 2010 may be 827 million tons which is increased 6.1% compare to the level of 2009. In terms of the compound annual growth rate, it is forecasted that the iron ore may show 4.7% of increasing rate from 2009 to 2015 and the seaborne trade of coal may be increased 6.1% annually for the same period.

• Asian-Australasian Journal of Animal Sciences
• /
• v.21 no.10
• /
• pp.1501-1505
• /
• 2008

A broiler experiment was conducted to compare the effects of duration and level of iron-methionine chelate (Fe-Met) supplementation on the iron, copper (Cu) and zinc (Zn) content of broiler meat. Two hundred and fifty hatched Ross broiler chickens were randomly assigned to 5 dietary treatments. Each treatment had 5 replicates of 10 birds (5 males and 5 females) each. Birds were housed in raised floor batteries and fed traditional broiler diets ad libitum for 5 weeks. Dietary treatments were as follows: Control and two levels of Fe-Met (100 or 200 ppm in Fe) supplemented for either the whole period (0-5 wk) or grower period (4-5 wk). Production performance was not significantly affected by treatments. Iron content in the muscles (breast, leg and wing) and organs (liver and spleen) were significantly (p<0.05) increased as the level and duration of Fe-Met supplementation increased. The highest concentration of iron was shown in Fe-Met 200 fed for the whole period. Liver contained the highest amount of iron followed by spleen, leg muscle, wing muscle and breast muscle. Supplementation of Fe-Met 200 for the grower period resulted in higher iron concentration in liver and spleen than supplementation of Fe-Met 100 for the whole period. However, the same treatment resulted in lower iron concentration in muscles (breast, leg and wing) than the treatment of Fe-Met 100 for the whole period. In order to achieve the highest iron enrichment in the muscles, Fe-Met should be supplemented at 200 ppm in Fe for the whole period (5 wks). Fe-Met supplementation increased copper concentration in all muscles and organs except wing muscle. Zinc concentration decreased in breast and wing muscle but tended to increase in leg muscle, liver and spleen by Fe-Met 200 supplementation. Color of muscle was not significantly affected by Fe-Met treatments. However, redness of leg and breast muscle, and yellowness of leg and breast muscle tended to increase by supplementation of Fe-Met for the whole period. It was concluded that iron content of broiler meat can be effectively enriched by supplementation of 200 ppm of Fe as Fe-Met for 5 wks.

• Korean Journal of Heritage: History & Science
• /
• v.43 no.3
• /
• pp.144-179
• /
• 2010

Investigation into iron manufacture relics has been active since 1970s, especially accelerated in 1990s across the country. Consideration of the importance of production site relics has lately attracted attention to iron manufacture relics. Methodological studies of the investigation into iron manufacture relics, however, were less made compared with those of the investigation into tomb, dwelling, or swampy place relics. It is because the process of iron manufacture is too complicated to understand and also requires professional knowledge of metal engineering. With the recognition of these problems this research is to form an opinion about how to excavate, to rearrange and classify, and to examine iron manufacture relics, based upon the understanding of the nature of iron, iron production process, and metal engineering features of related relics like slag, iron lumps and so on. This research classifies iron manufacture relics into seven types according to the production process; mining, smelting, refining, tempering, melting, steelmaking, and the others. Then it arranges methods to survey in each stage of field study, trial digging, and excavation. It also explains how to classify and examine excavated relics, what field of natural science to be used to know the features of relics, and what efforts have been made to reconstruct a furnace and what their problems were, making the best use of examples, drawings, and photos. It comes to the conclusion, in spite of the lack of in-depth discussion on application and development of various investigation methods, that iron manufacture relics can be classified according to the production process, that natural sciences should be applied to get comprehensive understanding of relics as well as archeological knowledge, and that efforts to reconstruct a furnace should be continued from the aspect of experimental archeology.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.1
• /
• pp.26-33
• /
• 2002

In order to assess the effect of feeding raw or processed cotton (Gossypium) seed meal (CSM) on meat and wool production, 30 male crossbred lambs (3-4 months) of uniform body weight were assigned equally to five dietary treatments in a completely randomised design. The CSM was processed by three different methods i.e., cooking the meal at $100^{\circ}C$ for 45 minutes, treatment with 1% calcium hydroxide ($Ca(OH)_2$) for 24 h and iron treatment in the ratio of 1 part free gossypol (FG) to 0.3 parts of iron for 30 minutes. The lambs were fed isonitrogenous and isocaloric concentrate mixtures, containing 30% deoiled peanut meal (reference diet) and 40% of either raw, cooked, $Ca(OH)_2$ or iron treated CSM for 180 days. The raw and variously processed CSM replaced about 50% nitrogen of reference concentrate mixture. The concentrate mixtures were fed to meet 80% of the protein requirements (NRC, 1985) along with ad libitum chopped maize (Zea mays) hay. The slaughter weight, empty body weight and carcass weight was higher ($p{\leq}0.01$) in lambs fed cooked CSM incorporated diets, compared to diets containing deoiled peanut meal (DPNM). These parameters were not influenced by feeding diets containing either raw, $Ca(OH)_2$ or iron treated CSM in comparison DPNM diets. The carcass length, loin eye area and edible and inedible portion of carcass and the meat: bone ratio in whole carcass were also not affected by feeding CSM based diets. Among various primal cuts, the yield of legs was lower ($p{\leq}0.05$) from raw CSM fed lambs in comparison to DPNM fed lambs. The fat content in the Longissimus dorsi muscle was reduced ($p{\leq}0.05$) in lambs fed processed CSM based diets compared to those fed DPNM diet. Replacing DPNM with either raw or processed CSM based diets did not influence the sensory attributes and overall acceptability of meat. The wool yield was higher ($p{\leq}0.05$) in iron treated CSM fed lambs. The fibre length and fibre diameter were comparable among lambs on various dietary regimes. Among lambs fed variously processed CSM diets, the feed cost per kg of edible meat production was lower ($p{\leq}0.05$) on $Ca(OH)_2$ treated CSM, followed by cooked CSM diet and then on raw CSM based diets compared to DPNM diet. The CSM after 1% $Ca(OH)_2$ treatment or cooking for 45 minutes appears to be a satisfactory protein supplement in lamb diets for meat and wool production to replace at least 50% nitrogen of scarce and costly peanut meal.

• Journal of Korea Foundry Society
• /
• v.17 no.4
• /
• pp.371-378
• /
• 1997

The study for direct synthesis of TaC carbide which was a reaction product of tantalum and carbon in the cast iron was performed. Cast iron which has hypo-eutectic composition was cast bonded in the metal mold with tantalum thin sheet of thickness of $100{\mu}m$. The contents of carbon and silicon of cast iron matrix was controlled to have constant carbon equivalent of 3.6. The chracteristics of microstructure and the formation mechanism of TaC carbide in the interfacial reaction layer in the cast iron/tantalum thin sheet heat treated isothermally at $950^{\circ}C$ for various time were examined. TaC carbide reaction layer was grown to the dendritic morphology in the cast iron/tantalum thin sheet interface by the isothermal heat treatment. The composition of TaC carbide was 48.5 at.% $Ti{\sim}48.6$ at.% C-2.8 at.% Fe. The hardness of reaction layer was MHV $1100{\sim}1200$. The thickness of reaction layer linearly increased with increasing the total content of carbon in the cast iron matrix and isothermal heat treating time. The growth constant for TaC reaction layer was proportional to the log[C] of the matrix. The formation mechanism of TaC reaction layer at the interface of cast iron/tantalum thin sheet was proved to be the interfacial reaction.

• Journal of Conservation Science
• /
• v.38 no.1
• /
• pp.33-44
• /
• 2022

The study, iron-making process was examined through the scientific analysis of six by-products that were obtained during iron making at the Songdu-ri site in Jincheon. The total Fe content of the slags excavated from the Songdu-ri site was 36.29-54.61 wt%, whereas the deoxidation agent was 26.48-49.08 wt%. The compound analysis result indicated that fayalite and wüstite are the main compounds in slag. Furthermore, the microstructure analysis result confirmed the presence of fayalite and wüstite in the slag. It can be inferred from the flat shape in a bright matrix structure of the hammer scales that forging was performed in the latter stage. The Raman micro-spectroscopy results confirmed that the surface was hematite (Fe₂O₄), middle layer was magnetite (Fe₃O₄), and inner layer was wüstite (FeO). The presence of smelting and smithing slags, spheroid hammer scales, and flake hammer scales suggests that at the Songdu-ri site, iron-making process is carried out by division of labor into producing iron bloom through direct smelting, refining and forge welding, and ingot production.

• 한국생물공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.284-286
• /
• 2003

In order to optimize the culture medium for fumaric acid production using newly isolated fungi, we investigated the effects of various carbon sources and nitrogen sources. When rice bran as nitrogen source was used, the effects of trace elements (phosphate, magnesium, zinc, and iron) on fumaric acid production were also investigated. When initial glucose of 50 g/L and rice bran was employed, maximum fumaric acid was produced without addition of magnesium, zinc, and iron.

• Journal of Conservation Science
• /
• v.18 s.18
• /
• pp.33-50
• /
• 2006

Around Yeongsan river basin, there are Yeongkwang Gundong, Muan Inpyeong Tombs, Muu Gusan-ri Tombs and Hampyeong Guksan remain from which a lot of iron artifacts were excavated. Among them, 6 iron artifacts were chosen, and their microstructures were analyzed. As a result, Iron artifacts were produced sponge iron by the low temperature reduction process and a part of microstructure have the possibility that steel made by decarburizing. And also, by tempering the parts which need high strength, the iron artifacts had high strength and by distributing the weakness of the tempered structure to the nearby untempered parts, their breaking was prevented and they had the durability. These skills were used then. Especially these skills were found to be used in the 2nd century by high skilled people because an iron axe excavated at Yeongkwang Gundong of 2nd century by the historical record showed that the skill was used. Also microstructures were found to show the possibility that the iron technology was inherited to the late 5th century. When producing iron artifacts made of sponge iron containing small amount of carbon, that was made by the production process repeating molding, carburizing, heat treatment and hammering.

• Journal of the Korean Ceramic Society
• /
• v.11 no.2
• /
• pp.22-30
• /
• 1974

This study was carried out to investigate the species of iron compounds in kaolin mineral and the bonding relation between the major kaolin and its subordinate iron compound existing as incidental mineral in common clay by means of chemical composition, X-ray diffraction, thermal differential and thermogravimetrie analysis for the application of clays in the field of ceramic raw material. The domestic clay are produced abounduntly in many places, but San-Cheong kaolin, Chu-An clay, and Yeong-Am clay were selected as samples in this experiment because of their frequent utilization in porcelain industry. Two kinds of samples with low and high iron content are picked up respectively from the place of production and elutriated under two micron size to determine the properties and concentration of iron compound very fine particles or colloidal substance of low crystalline grade. Therefore, hydrothermal treatment in autoclave was conducted considering the existence of low crystalline grade of iron compounds known as an amorphoue state in X-ray diffraction pattern furthermore, de-iron treatment of hydrothermal compound was done in order to identify the related iron compound before and after hydrothermal reaction and iron compound which is one of the samples was synthesized for the determination of their compounds state in more detail. The obtained results in this study are as follows: In San-Cheong kaolin, Chu-An clay and Yeong-Am clay 1) It is proved that species accompanying iron compound is $\alpha$-FeOOH form. 2) Iron compound is composed of very fine particles or colloidal substance. 3) The iron substance encircles the fine parts of clay minerals under 2 micron and acts as cementizing agent.

• 보존과학연구
• /
• s.27
• /
• pp.165-180
• /
• 2006

The research was conducted to understand type of iron used by those who lived at dwelling site of Yangsoo-ri in between the first century B.C. and the first century A.D. to make steel products and their technique such as steel making process and heat treatment, based on micro structure information obtained through microscopic metallographic structure analysis with SEM-EDS of six steel productsexhumed at the site. Key findings are summarized as below. In the sense that Si-Ca-Al style and less than 0.5% of Ti were found in the non-metallic inclusion, the material used for forged iron ware was magnetite resolved in that. It is, however, unclear whether magnetite was resolved at high temperature or at low temperature. Microscopic structure analysis revealed that forged steel products were made through repeated hot working, the technique of molding by hitting after heating in the process of resolving and molding iron. As a result, the iron used here for the products was not the iron ore which was produced through resolution from discarded cast iron axe, ingot iron. It is probable that to make those steel products, disposed-of cast iron was reused after being molded by decarburizing. Although a few of relics were analyzed for the research, they were of critical importance in defining the process of ironware production from the first century B.C. and the first century A.D. at the Yangsoo-ri region. Judging from the iron from A-19 dwellingsite, it is possible to conclude that the iron was manufactured from cast iron decarburized and yet more research has to be done into relics yetto be exhumed in order to ascertain the finding. All of these findings are believed to play a critical role in further studies to define the steel-manufacturing technique used on the central Korean peninsular in the ancient times.