• 자원ㆍ환경경제연구
• /
• 제19권2호
• /
• pp.341-360
• /
• 2010

조선산업에서의 수요는 해상물동량이며 공급은 선박의 건조량이다. 따라서 해상물동량에 대한 정확한 예측은 향후 조선산업의 호 불황을 전망할 수 있는 중요한 요인이 된다. 본 연구의 목적은 해상물동량 중 가장 큰 비중을 차지하고 있는 건화물(철광석, 석탄)의 물동량을 전망하는 것이다. 철광석 물동량의 예측을 위하여 조강생산과 세계 GDP를 독립변수로, 석탄 물동량 예측을 위하여 조강생산과 세계 발전량을 독립변수로 하는 회귀식을 도출하였으며, 두 회귀식 모두 통계적으로 유의하다는 결론을 얻었다. 전망 결과, 2010년 철광석 해상물동량은 2009년 대비 5.1% 증가한 8억 9,200만 톤 수준이 될 것으로 전망되었으며, 석탄은 전년대비 6.1% 증가한 8억 2,700만 톤 수준이 될 것으로 전망되었다. 2015년까지의 중기 전망(2009~2015)은 철광석이 연평균 4.7%, 석탄이 6.1%의 증가세를 보이는 것으로 나타났다. 전체 해상물동량에서 가장 비중이 큰 두 화물의 해상물동량에 대한 예측은 향후 해운경가와 조선경기의 향방을 가늠해 볼 수 있는 중요한 정보를 제공한다는 점에서 본 연구의 의미가 있다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제21권10호
• /
• pp.1501-1505
• /
• 2008

A broiler experiment was conducted to compare the effects of duration and level of iron-methionine chelate (Fe-Met) supplementation on the iron, copper (Cu) and zinc (Zn) content of broiler meat. Two hundred and fifty hatched Ross broiler chickens were randomly assigned to 5 dietary treatments. Each treatment had 5 replicates of 10 birds (5 males and 5 females) each. Birds were housed in raised floor batteries and fed traditional broiler diets ad libitum for 5 weeks. Dietary treatments were as follows: Control and two levels of Fe-Met (100 or 200 ppm in Fe) supplemented for either the whole period (0-5 wk) or grower period (4-5 wk). Production performance was not significantly affected by treatments. Iron content in the muscles (breast, leg and wing) and organs (liver and spleen) were significantly (p<0.05) increased as the level and duration of Fe-Met supplementation increased. The highest concentration of iron was shown in Fe-Met 200 fed for the whole period. Liver contained the highest amount of iron followed by spleen, leg muscle, wing muscle and breast muscle. Supplementation of Fe-Met 200 for the grower period resulted in higher iron concentration in liver and spleen than supplementation of Fe-Met 100 for the whole period. However, the same treatment resulted in lower iron concentration in muscles (breast, leg and wing) than the treatment of Fe-Met 100 for the whole period. In order to achieve the highest iron enrichment in the muscles, Fe-Met should be supplemented at 200 ppm in Fe for the whole period (5 wks). Fe-Met supplementation increased copper concentration in all muscles and organs except wing muscle. Zinc concentration decreased in breast and wing muscle but tended to increase in leg muscle, liver and spleen by Fe-Met 200 supplementation. Color of muscle was not significantly affected by Fe-Met treatments. However, redness of leg and breast muscle, and yellowness of leg and breast muscle tended to increase by supplementation of Fe-Met for the whole period. It was concluded that iron content of broiler meat can be effectively enriched by supplementation of 200 ppm of Fe as Fe-Met for 5 wks.

• 헤리티지:역사와 과학
• /
• 제43권3호
• /
• pp.144-179
• /
• 2010

본고는 1970년대 이래 제철유적에 대한 조사가 꾸준히 증가되었음에도 불구하고 그 조사방법에 대한 연구는 이에 미치지 못하는 상황을 인식하는 데서 비롯되었다. 제철유적은 1990년대에 들어오면서 전국적으로 조사가 급증하였으며, 특히 최근에는 생산유적의 중요성이 부각되면서 더욱 주목받고 있는 유적의 하나이다. 하지만 분묘유적이나 취락, 성곽유적 등에 비해 제철유적의 조사방법에 대한 소개와 연구는 크게 부족하다고 할 수 있다. 그 이유는 제철조업의 프로세스는 매우 복잡하고 다양할 뿐 아니라, 공정의 이해를 위해서는 금속공학적인 기초지식까지 학습해야 하는 어려움이 있기 때문이다. 즉 고고학 조사와 연구에 있어 제철과 관련된 유구 유물의 성격이 이러한 프로세스와 어떠한 상관관계를 가지는지 밝히기가 몹시 어렵다는 이유 때문이다. 이러한 문제를 해결하기 위해 철생산 및 철기제작의 공정과 철재, 철괴 등 관련유물의 금속학적 특징에 대한 이해를 바탕으로, 제철유적 발굴조사의 순서와 방법, 유물의 분류 및 정리방법에 대한 시론을 제시함으로써 정밀한 조사와 심도 있는 분석이 이루어질 수 있도록 하는 것이 본 연구의 목적이다. 본고에서는 제철유적을 조업공정에 따라 채광, 제련, 정련, 단야, 용해, 제강유적의 6가지 유형으로 분류한 후, 사전조사와 지표${\rightarrow}$시굴${\rightarrow}$발굴조사로 이어지는 각 단계별 조사방법에 대해 정리하였다. 또한 가장 대표적인 제철관련유물인 철재의 분류 및 정리에 있어 새로운 방법을 모색해 보았다. 더불어 유적의 성격파악에 필요한 자연과학분석 및 제철로 복원실험의 필요성에 대해서도 언급하였으며, 내용의 구성에서는 사례 제시와 도면 사진자료를 최대한 활용하였다. 본고에서는 다양한 조사연구방법의 응용과 개발에 대해 심도 있게 논의하지는 못하였지만, 유구 유물의 세밀한 관찰을 통해 공정에 따른 다양한 제철유적의 조사연구 방법론 개발이 매우 시급한 과제임을 알 수 있었다. 그리고 유적의 종합적인 성격규명을 위해서는 고고학적 지식뿐만 아니라 자연과학 분야가 다양하게 응용되어야 하며, 더불어 실험고고학의 측면에서도 지속적인 제철로의 복원실험이 필요함을 알 수 있었다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권1호
• /
• pp.26-33
• /
• 2002

In order to assess the effect of feeding raw or processed cotton (Gossypium) seed meal (CSM) on meat and wool production, 30 male crossbred lambs (3-4 months) of uniform body weight were assigned equally to five dietary treatments in a completely randomised design. The CSM was processed by three different methods i.e., cooking the meal at $100^{\circ}C$ for 45 minutes, treatment with 1% calcium hydroxide ($Ca(OH)_2$) for 24 h and iron treatment in the ratio of 1 part free gossypol (FG) to 0.3 parts of iron for 30 minutes. The lambs were fed isonitrogenous and isocaloric concentrate mixtures, containing 30% deoiled peanut meal (reference diet) and 40% of either raw, cooked, $Ca(OH)_2$ or iron treated CSM for 180 days. The raw and variously processed CSM replaced about 50% nitrogen of reference concentrate mixture. The concentrate mixtures were fed to meet 80% of the protein requirements (NRC, 1985) along with ad libitum chopped maize (Zea mays) hay. The slaughter weight, empty body weight and carcass weight was higher ($p{\leq}0.01$) in lambs fed cooked CSM incorporated diets, compared to diets containing deoiled peanut meal (DPNM). These parameters were not influenced by feeding diets containing either raw, $Ca(OH)_2$ or iron treated CSM in comparison DPNM diets. The carcass length, loin eye area and edible and inedible portion of carcass and the meat: bone ratio in whole carcass were also not affected by feeding CSM based diets. Among various primal cuts, the yield of legs was lower ($p{\leq}0.05$) from raw CSM fed lambs in comparison to DPNM fed lambs. The fat content in the Longissimus dorsi muscle was reduced ($p{\leq}0.05$) in lambs fed processed CSM based diets compared to those fed DPNM diet. Replacing DPNM with either raw or processed CSM based diets did not influence the sensory attributes and overall acceptability of meat. The wool yield was higher ($p{\leq}0.05$) in iron treated CSM fed lambs. The fibre length and fibre diameter were comparable among lambs on various dietary regimes. Among lambs fed variously processed CSM diets, the feed cost per kg of edible meat production was lower ($p{\leq}0.05$) on $Ca(OH)_2$ treated CSM, followed by cooked CSM diet and then on raw CSM based diets compared to DPNM diet. The CSM after 1% $Ca(OH)_2$ treatment or cooking for 45 minutes appears to be a satisfactory protein supplement in lamb diets for meat and wool production to replace at least 50% nitrogen of scarce and costly peanut meal.

• 한국주조공학회지
• /
• 제17권4호
• /
• pp.371-378
• /
• 1997

The study for direct synthesis of TaC carbide which was a reaction product of tantalum and carbon in the cast iron was performed. Cast iron which has hypo-eutectic composition was cast bonded in the metal mold with tantalum thin sheet of thickness of $100{\mu}m$. The contents of carbon and silicon of cast iron matrix was controlled to have constant carbon equivalent of 3.6. The chracteristics of microstructure and the formation mechanism of TaC carbide in the interfacial reaction layer in the cast iron/tantalum thin sheet heat treated isothermally at $950^{\circ}C$ for various time were examined. TaC carbide reaction layer was grown to the dendritic morphology in the cast iron/tantalum thin sheet interface by the isothermal heat treatment. The composition of TaC carbide was 48.5 at.% $Ti{\sim}48.6$ at.% C-2.8 at.% Fe. The hardness of reaction layer was MHV $1100{\sim}1200$. The thickness of reaction layer linearly increased with increasing the total content of carbon in the cast iron matrix and isothermal heat treating time. The growth constant for TaC reaction layer was proportional to the log[C] of the matrix. The formation mechanism of TaC reaction layer at the interface of cast iron/tantalum thin sheet was proved to be the interfacial reaction.

• 보존과학회지
• /
• 제38권1호
• /
• pp.33-44
• /
• 2022

The study, iron-making process was examined through the scientific analysis of six by-products that were obtained during iron making at the Songdu-ri site in Jincheon. The total Fe content of the slags excavated from the Songdu-ri site was 36.29-54.61 wt%, whereas the deoxidation agent was 26.48-49.08 wt%. The compound analysis result indicated that fayalite and wüstite are the main compounds in slag. Furthermore, the microstructure analysis result confirmed the presence of fayalite and wüstite in the slag. It can be inferred from the flat shape in a bright matrix structure of the hammer scales that forging was performed in the latter stage. The Raman micro-spectroscopy results confirmed that the surface was hematite (Fe₂O₄), middle layer was magnetite (Fe₃O₄), and inner layer was wüstite (FeO). The presence of smelting and smithing slags, spheroid hammer scales, and flake hammer scales suggests that at the Songdu-ri site, iron-making process is carried out by division of labor into producing iron bloom through direct smelting, refining and forge welding, and ingot production.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2003년도 생물공학의 동향(XIII)
• /
• pp.284-286
• /
• 2003

In order to optimize the culture medium for fumaric acid production using newly isolated fungi, we investigated the effects of various carbon sources and nitrogen sources. When rice bran as nitrogen source was used, the effects of trace elements (phosphate, magnesium, zinc, and iron) on fumaric acid production were also investigated. When initial glucose of 50 g/L and rice bran was employed, maximum fumaric acid was produced without addition of magnesium, zinc, and iron.

• 보존과학회지
• /
• 제18권
• /
• pp.33-50
• /
• 2006

영산강유역이라는 지역적 연계성을 가진 영광 군동, 무안 인평고분군, 무안 구산리고분군, 함평 국산유적에서 출토된 유물 중 백제식 묘제인 횡혈식석실분 출현 이전으로 편년되는 철기유물 6점을 선정하여 미세조직을 분석하였다. 분석 결과, 고대 영산강유역에서는 저온환원법에 의해 괴련철을 생산하는 기술이 주를 이루고 있었으며, 아울러 탄소를 제거시켜 강소재를 생산하는 기술체계가 이루어졌을 가능성도 확인되었다. 또한 강도를 필요로 하는 부위에만 담금질을 함으로써 높은 강도를 가짐과 동시에 담금질 조직이 가지는 취성을 담금질이 안된 부위에 분산시켜 철기가 깨지는 것을 방지하고 인성을 부여하는 기술이 이루어지고 있었다고 생각된다. 이러한 기술은 2세기대로 편년되는 영광 군동 출토 철부 미세구조에서 확인되고 있어 높은 기술체계를 가진 집단이 2세기 이전에 존재하고 있었고 5세기 말까지 이어졌을 가능성이 높다고 판단된다. 낮은 탄소함량의 괴련철로 철기를 제작하는 경우 성형-침탄-열처리-단타를 반복적으로 행하는 제작 공정이 이루어진 것으로 보인다.

• 한국세라믹학회지
• /
• 제11권2호
• /
• pp.22-30
• /
• 1974

This study was carried out to investigate the species of iron compounds in kaolin mineral and the bonding relation between the major kaolin and its subordinate iron compound existing as incidental mineral in common clay by means of chemical composition, X-ray diffraction, thermal differential and thermogravimetrie analysis for the application of clays in the field of ceramic raw material. The domestic clay are produced abounduntly in many places, but San-Cheong kaolin, Chu-An clay, and Yeong-Am clay were selected as samples in this experiment because of their frequent utilization in porcelain industry. Two kinds of samples with low and high iron content are picked up respectively from the place of production and elutriated under two micron size to determine the properties and concentration of iron compound very fine particles or colloidal substance of low crystalline grade. Therefore, hydrothermal treatment in autoclave was conducted considering the existence of low crystalline grade of iron compounds known as an amorphoue state in X-ray diffraction pattern furthermore, de-iron treatment of hydrothermal compound was done in order to identify the related iron compound before and after hydrothermal reaction and iron compound which is one of the samples was synthesized for the determination of their compounds state in more detail. The obtained results in this study are as follows: In San-Cheong kaolin, Chu-An clay and Yeong-Am clay 1) It is proved that species accompanying iron compound is $\alpha$-FeOOH form. 2) Iron compound is composed of very fine particles or colloidal substance. 3) The iron substance encircles the fine parts of clay minerals under 2 micron and acts as cementizing agent.

• 보존과학연구
• /
• 통권27호
• /
• pp.165-180
• /
• 2006

The research was conducted to understand type of iron used by those who lived at dwelling site of Yangsoo-ri in between the first century B.C. and the first century A.D. to make steel products and their technique such as steel making process and heat treatment, based on micro structure information obtained through microscopic metallographic structure analysis with SEM-EDS of six steel productsexhumed at the site. Key findings are summarized as below. In the sense that Si-Ca-Al style and less than 0.5% of Ti were found in the non-metallic inclusion, the material used for forged iron ware was magnetite resolved in that. It is, however, unclear whether magnetite was resolved at high temperature or at low temperature. Microscopic structure analysis revealed that forged steel products were made through repeated hot working, the technique of molding by hitting after heating in the process of resolving and molding iron. As a result, the iron used here for the products was not the iron ore which was produced through resolution from discarded cast iron axe, ingot iron. It is probable that to make those steel products, disposed-of cast iron was reused after being molded by decarburizing. Although a few of relics were analyzed for the research, they were of critical importance in defining the process of ironware production from the first century B.C. and the first century A.D. at the Yangsoo-ri region. Judging from the iron from A-19 dwellingsite, it is possible to conclude that the iron was manufactured from cast iron decarburized and yet more research has to be done into relics yetto be exhumed in order to ascertain the finding. All of these findings are believed to play a critical role in further studies to define the steel-manufacturing technique used on the central Korean peninsular in the ancient times.