• 대한화학회지
• /
• 제68권1호
• /
• pp.20-24
• /
• 2024

This article presents the advantages of utilizing gossypol and its derivatives as reagents for iron (III) (Fe (III)) ions. A novel spectrophotometric method has been developed for the determination of Fe (III) using gossypol derivatives in the presence of a universal buffer solution. Optimal conditions have been identified, and the composition and stability constants of the Fe (III) complex with gossypolacetic acid have been determined.

• 한국안전학회지
• /
• 제35권5호
• /
• pp.128-136
• /
• 2020

In the present experimental study, the effect of water-based iron(III) oxide nanofluid on the MFB(Minimum Film Boiling) point during quenching was investigated. As the highly heated test specimen, the cylindrical stainless steel rod was used, and as the test fluids, the water-based iron(III) oxide nanofluids of 0.001 and 0.01 vol% concentrations were prepared with the pure water. To examine the effect of location in the test specimen, the thermocouples were installed at the bottom and middle of wall, and center in the test specimen. Through a series of experiments, the experimental data about the influences of nanofluid concentrations, the number of repeated experiments, and locations in the test specimen on the reaching time to MFB point, MFBT(Minimum Film Boiling Temperature), and MHF(Minimum Heat Flux) were obtained. As a result, with increasing the concentration of nanofluid and the number of repeated experiments, the reaching time to MFB point was reduced, but the MFBT and MHF were increased. In addition, it was found that the effect of water-based iron(III) oxide nanofluid on the MFB point at the bottom of wall in the test specimen was observed to be greater than that at the middle of wall and center. In the present experimental ranges, as compared with the pure water, the water-based iron(III) oxide nanofluid showed that the maximum reduction of reaching time to MFB point was about 53.6%, and the maximum enhancements of MFBT and MHF were about 31.1% and 73.4%, respectively.

• 대한화학회지
• /
• 제37권12호
• /
• pp.1035-1046
• /
• 1993

몇 가지 iron(III)porphyrin 착화합물을 합성하고, 이들에 대하여 역상 액체 크로마토그래피에서의 최적 분리조건 및 용리거동을 조사하였다. 분리관, 흐름속도, 용리액의 조성 등을 변화시킨 실험에서 분리관은 NOVA-PAK $C_{18}$, 용리액은 methanol/water의 이성분 혼합용매를 적당히 조절하였을 때 용량인자가 최적 분리조건인 $0{\leq}logk'{\leq}1$ 범위를 만족시켰다. 용리거동에 관련된 인자들로는 용리액의 세기, 분포비$(D_c)$ 및 분리관의 온도변화에 따른 엔탈피(${\Delta}H^{\circ}$), 엔트로피(${\Delta}S^{\circ}$), 보정온도($\beta$)를 조사하여 분리 메카니즘을 규명하였다. 이성분 용매계에서 용리 세기 및 물의 부피분율과 용량인자(logk')와의 관계를 조사한 결과 이들간에는 직선성이 잘 성립되었으며, 부피비와 용량인자와의 관계에서도 비교적 직선성을 잘 나타내었다. 이러한 결과로부터 시료의 용리 메카니즘이 소용매성 효과에 기인하고 있음을 확인할 수 있었다. 또한 열역학적인 방법으로 용리거동을 조사하기 위하여, van't Hoff plot으로부터 엔탈피, 엔트로피를 구하였다. 엔탈피와 용량인자와의 상관관계를 조사한 결과 iron(III)porphyrin 착화합물과 정지상과의 상호작용은 온도변화에 과계없이 일정함을 알 수 있었고, 정지상과의 소용매성 결합 과정은 등평형 거동을 나타내었다.

• Bulletin of the Korean Chemical Society
• /
• 제31권12호
• /
• pp.3617-3622
• /
• 2010

The reaction of stoichiometric amount of $FeCl_2{\cdot}4H_2O$, (2-pyridylmethyl, 3-pyridylmethyl)amine (2,3-pyma) and sodium azide/sodium thiocyanate in methanol under aerobic conditions affords the dinuclear Fe(III) complexes, [(2,3-pyma) $(N_3)_2Fe({\mu}-OCH_3)_2Fe(N_3)_2$(2,3-pyma)]${\cdot}CH_3OH$ (1) and [(2,3-pyma)$(NCS)_2Fe({\mu}-OCH_3)_2Fe(NCS)_2$(2,3-pyma)] (2) in good yield. Two bis-methoxy-bridged diiron(III) complexes are isolated and characterized. The coordination geometries around iron(III) ions in 1 and 2 are the same tetragonally distorted octahedron. The iron(III) ions are coordinated by two nitrogens of a 2,3-pyma, two nitrogens of two azide/thiocyanate ions, and two oxygens of two methoxy groups. Both compounds are isomorphous. The structures of 1 and 2 display the C-$H{\cdots}\pi$ and/or $\pi-\pi$ stacking interactions as well as hydrogen bonding interactions, respectively. Compounds 1 and 2 show significant antiferromagnetic couplings through the bridged methoxy groups between the iron(III) ions in the temperature range from 5 to 300 K ($H=-2JS_1{\cdot}S_2$, J=-19.1 and $-13.9\;cm^{-1}$ for 1 and 2).

• Bulletin of the Korean Chemical Society
• /
• 제21권9호
• /
• pp.923-928
• /
• 2000

[FeIII(BBA)DBC]ClO4 as a new functional model for catechol dioxygenases has been synthesized, where BBA is a bis(benzimidazolyl-2-methyl)amine and DBC is a 3,5-di-tert-butylcatecholate dianion.The BBA complex has a structuralfeature that iron cent er has a five-coordinate geometry similar to that of catechol dioxygenase-substrate complex.The BBA complex exhibits strong absorptionbands at 560 and 820 nm in CH3CN which are assigned to catecholate to Fe(III) charge transfer transitions. It also exhibits EPR signals at g = 9.3 and 4.3 which are typical values for the high-spin FeIII (S = 5/2) complex with rhombicsymmetry. Interestingly, the BBA complex reacts with O2 within an hour to afford intradiol cleavage (35%) and extradiol cleavage (60%) products. Surprisingly, a green color intermediate is observed during the oxygenation process of the BBA com-plex in CH3CN. This green intermediate shows a broad isotropic EPR signal at g = 2.0. Based on the variable temperature EPR study, this isotropic signalmight be originated from the [Fe(III)-peroxo-catecholate] species havinglow-spin FeIII center, not from the simple organic radical. Consequently,it allows O2 to bind to iron cen-ter forming the Fe(III)-superoxide species that converts to the Fe(III)-peroxide intermediate. These present data can lead us tosuggest that the oxygen activation mechanism take place for the oxidative cleavingcatechols of the five-coordinate model systems for catechol dioxygenases.

• 한국환경과학회지
• /
• 제8권2호
• /
• pp.205-209
• /
• 1999

Iron hydroxides are good adsorbents for uncomplexed metals, some metal-ligand complexes and many metal oxyanions. However, their adsorption properties of these precipitations are not fully exploited in wastewater treatment operations because of difficulties associated with their separation from the aqueous phase. This study describes experiments in which iron hydroxides were coated onto the surface of ordinary adsorbents(Sea sand) that are very resistant to acids, The coated adsorbents were used in adsorption of oxyanionic metals. The process was successful in removing some anions such as $SeO_3(-II)$ over a wide range of metal concentrations and sorption of oxyanionic metals increased with decreasing pH. Formation of two surface complexes for oxyanionic metals adsorption on iron hydroxides comprise (1) complexation of the free anion by a positively charged surface site, and (2) protonation of the adsorbed anion (or alternatively adsorption of a protonated form from solution) The coated adsorbents are inexpensive to prepare and could serve as the basis of a useful oxyanionic metal removal.

• 대한화학회지
• /
• 제22권5호
• /
• pp.311-316
• /
• 1978

Fe(III)과 Xylenol Orange (XO 또는 $H_6A$)의 반응을 분광광도법으로 연구하였다. Fe(III)과 XO는 조성이 Fe(III) : XO = 2 : 1 및 1 : 1 인 두가지 착물을 형성함을 확인하였다. 2 : 1 착물은 XO보다 Fe(III)를 많이 포함한 산성에서 안정하고, 1 : 1 착물은 XO가 많이 포함된 약산성용액에서 안정하다. 흡수극대는 590nm(2 : 1)와 500nm(1 : 1)이고 몰흡광계수는 각각 $3.18{\pm}0.04{\times}10^4,\;1.32{\pm}0.03{\times}10^4$이다. pH값을 변화시키면서 측정한 두 착물의 안정도상수는 $log{\beta}_{21}=18.69{\pm}0.03,\;log{\beta}_{212}=42.08{\pm}0.09,\;log{\beta}_{11}=4.17{\pm}0.04,\;and\;log{\beta}_{113}=34.47{\pm}0.07$이었다.

• 대한자원환경지질학회:학술대회논문집
• /
• 대한자원환경지질학회 2003년도 춘계 학술발표회 논문집
• /
• pp.236-236
• /
• 2003

Anaerobic Fe(III)-reducing bacteria are known to be able to reduce crystalline and amorphous Fe(III) oxides. Anaerobic Fe(III)-reducing bacterial reduction can induce several kinds of secondary minerals (Fe(II) containing minerals) such as magnetite, siderite, vivianite [($Fe_{3}(PO_{4}{\cdot}2H_{2}O$], and iron sulfide (FeS) according to variety of geochemical and biological conditions. (omitted)

• 한국결정성장학회지
• /
• 제8권1호
• /
• pp.138-144
• /
• 1998

에탄올을 용매로 사용한 철질산염(Fe$(MO_3)_3{\cdot}9H_2O$) 용액의 가용매분해 및 중합반응을 거친후 $350^{\circ}C$의 온도로 열처리를 하여 0.5$\alpha$m이하의 크기를 갖는 $\alpha$-$Fe_2O_3$ 미분말을 합성하였다. 반응시간에 따른 pH 변화와 적외선 분광 분석을 통해 용액내의 반응을 규명하였으며, 열분석(DSC), X-선 회절분석 및 적외선 분광(FT-IR) 분석을 통해 $\alpha$-$Fe_2O_3$가 형성되는 분해과정에 대해 분석하였다. 또한 반응온도와 철질산염의 농도를 변화시켜 각각 $\alpha$-$Fe_2O_3$분말의 입자크기에 미치는 영향을 조사하였다.

• 대한화학회지
• /
• 제21권2호
• /
• pp.121-124
• /
• 1977

황산제 1철을 전기로내에서 하소(瑕燒)시키고, 물에 침출시켜 몰비(Fe(III)/Fe(II))를 변화시킨 각각의 수용액을 가수분해하여 산화철 생성반응을 검토하였다. 하소온도가 증가함에 따라 소광(燒鑛)중의 Fe(III)/Fe(II)비가 증가하였고, $500^{\circ}C$에서 1시간 가량 하소시킨 시료가 등몰이 됨을 알았다. 등몰로 형성된 시료를 20% 수용액으로 만든 다음 pH 7 ∼ 8로 조절하고 반응온도 $100^{\circ}C$, 가압솥내 압력 3기압 및 반응시간 2시간으로 하여 가수분해 하였더니 진한흑색의 산화철이 93% 이상 생성되었다.