• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.6
• /
• pp.586-594
• /
• 2013

This paper proposes a new coupling element of microwave slot coupler for designing waveguide slot array which can reduce the effect of undesired higher order mode coupling between coupling and radiating slots in the branch waveguide. The proposed device is composed of a centered longitudinal shunt-series coupling slot at the center of broad wall shared by two crossed rectangular waveguides and an asymmetric compound iris that excites the coupling slot. We first have obtained scattering parameters for the proposed coupler by use of EM S/W tool HFSS and then extracted the parameters of T- network equivalent circuit for the coupling slot. We also have analyzed the resonant properties such as resonant length and normalized admittance by changing the geometrical dimensions. The measured results for the fabricated coupler with short-circuited block ${\lambda}_g/4$ away from the coupling slot are well agreed with the simulated ones.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.2 s.93
• /
• pp.128-133
• /
• 2005

An iris-coupled partial H-plane filter as a new type of partial H-plane filter is proposed. The proposed filter can be compared with conventional H-plane filter and uses an iris-type evanescent waveguide as a coupling structure. Filter design technique based on numerical simulation is developed to design and compare the proposed filter and H-plane filter. Designed iris-coupled partial H-plane filter has the same frequency response as that of the conventional H-plane filter while its cross section is one quarter. A good agreement between measurements and theoretical prediction is achieved.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.11
• /
• pp.70-77
• /
• 1996

In this paper, a modifed TE$_{113}$/TM$_{012}$ triple-mode bandpass filter is implemented by using a modified inter-cavity iris in which the number of slots are reduced upto 50%. In a coventioanl iris two prirs of slot apertures are used to independently couple three resonant modes between two adjacent cavities. However, if transverse magnetic polarizability of a pair of veritcal slot apertures is used to control weak horizontal TE$_{h}$-TE$_{h}$ mode coupling, the width of novel iris slots would substitute for the slot length of the conventional iris, causing to eliminate the horizontal slot apertures. The measured data of two filters, which are the modified filter and ocnventional one, are compared. Experimental result shows that the characteristics of the novel triple-mode filter matches well that of the conventional filter.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.6
• /
• pp.62-71
• /
• 1996

In this paper, we design tripel-mode channel filter using iris optimization technique and investigate its response. The cavity diameter is determined to resonate three orthogonal modes coincidently and inter-cavity iris is optimized in which one slot control one TE-TE mode and other TM-TM mode couplings simultaneously. Since the electric/magnectic field is variable due to slot position, the center position of the slot which handle coupling coefficients of two modes should be designe dwith optimizatin technique presented here. The implemented triple-mode filter in this paper saves its mass and volume upto 33% relating to the dual-mode filter, caused by the reduced number of cavities.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.4
• /
• pp.460-465
• /
• 2007

In this paper, we propose a novel pattern classification method based on statistical properties of the given data and fuzzy-rough set to minimize the coupling problem of the rules. In the proposed method, statistical properties is used by a selection criteria for deciding a partition number of antecedent fuzzy sets, and for minimizing an coupling problem of the generated rules. Moreover, rough set is used as a tool to remove unnecessary attributes between generated rules from the numerical data. In order to verify the validity of the proposed method, we compared the classification results (i.e, classification precision) of the proposed with the conventional pattern classification methods on the Fisher's IRIS data. From experiment results, we can conclude that the proposed method shows relatively better performance than those of the classification methods based on the conventional approaches.

• Journal of electromagnetic engineering and science
• /
• v.2 no.2
• /
• pp.100-104
• /
• 2002

A proper equivalent circuit model for coupling iris has been derived in order to compensate the length of cavity in a $TE_{011}$TEX> mode cylindrical cavity filter. A method to resolve the difference in bandwidth and feature or ripple systematically has been proposed. This method can be applied to other types of waveguide cavity filter.

• Korean Journal of Ecology and Environment
• /
• v.44 no.3
• /
• pp.280-291
• /
• 2011

Bottom-up approaches to control of Microcystis aeruginosa blooms were comparatively investigated through an in situ mesocosm experiment using aquatic plants (Iris pseudoacorus). In the mesocosm experiments, floating I. pseudoacorus, seemed to be effective in controlling massive M. aeruginosa blooms in an agricultural reservoir, exhibiting a close coupling with temporal variations in Chl-a and DO concentration. Shading by floating I. pseudoacorus resulted in a reduced phytoplankton abundance inhibiting light energy availability. Moreover, I. pseudoacorus may suppress phytoplankton growth through the excretion of chemical substances, likes a allelopathy, that inhibit phytoplankton photosynthetic activity. The $^{15}N$ atom % of I. pseudoacorus showed higher values than POM, suggesting that I. pseudoacorus assimilates DIN predominantly compared to phytoplankton, which was mostly M. aeruginosa. This result strongly suggests that the M. aeruginosa bloom should be regulated by aquatic plants, like I. pseudoacorus, this approach can affect zooplankton composition. This is the first study that has used stable isotope tracers to evaluate the biomanipulation efficiency through floating I. pseudoacorus.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.18 no.3
• /
• pp.360-366
• /
• 2008

The initial fuzzy partitions in fuzzy rule-based classification systems are determined by considering the domain region of each attribute with the given data, and the optimal classification boundaries within the fuzzy partitions can be discovered by tuning their parameters using various learning processes such as neural network, genetic algorithm, and so on. In this paper, we propose a selection method for fuzzy partition based on statistical information to maximize the performance of pattern classification without learning processes where statistical information is used to extract the uncertainty regions (i.e., the regions which the classification boundaries in pattern classification problems are determined) in each input attribute from the numerical data. Moreover the methods for extracting the candidate rules which are associated with the partition intervals generated by statistical information and for minimizing the coupling problem between the candidate rules are additionally discussed. In order to show the effectiveness of the proposed method, we compared the classification accuracy of the proposed with those of conventional methods on the IRIS and New Thyroid Cancer data. From experimental results, we can confirm the fact that the proposed method only considering statistical information of the numerical patterns provides equal to or better classification accuracy than that of the conventional methods.

• Journal of electromagnetic engineering and science
• /
• v.4 no.1
• /
• pp.30-36
• /
• 2004

We determined equivalent circuit parameters of a 1.5 cell S-band RF gun cavity from the resonant characteristics of its decoupled cavities(half cell and full cell) using the code SUPERFISH. Equivalent circuit parameters of the 1.5 cell RF gun cavity resonated in the 0-mode were obtained easily from the circuit parameters of each decoupled cavities. In order to obtain equivalent circuit parameters for the $\pi$ -mode cavity, we calculated the differences of the resonant frequencies and the equivalent resistances between the 0- and $\pi$ -modes with slight variations of the radius and thickness of the coupling iris. From those differences, we obtained R/Q value and equivalent resistance of the $\pi$ -mode, which are directly related to the equivalent circuit parameters of the coupled cavity. Using calculated R/Q value, we can express equivalent inductance, capacitance and resistances of the RF gun cavity resonated in the $\pi$ -mode, which can be useful for analyzing coupled cavities in a steady state.