• Restorative Dentistry and Endodontics
• /
• v.29 no.2
• /
• pp.170-176
• /
• 2004

Objectives : In the unique metal iris method. the developing interfacial gap at the cavity floor resulting from the cavity wall property during polymerizing composite resin might affect the nominal shear bond strength values. The aim of this study is to evaluate that the iris method reduces the cohesive failure in the substrates and the cavity wall property effects on the shear bond strength tests using iris method. Materials and Methods : The occlusal dentin of 64 extracted human molars were randomly divided into 4 groups to simulate two different levels of cavity wall property (metal and dentin iris) and two different materials ($ONE-STEP^{\circledR}$ and $ALL-BOND^{\circledR}$ 2) for each wall property. After positioning the iris on the dentin surface. composite resin was packed and light-cured. After 24 hours the shear bond strength was measured at a crosshead speed of 0.5 mm/min. Fracture analysis was performed using a microscope and SEM. The data was analyzed statistically by a two-way ANOV A and t-test. Results : The shear bond strength with metal iris was significant higher than those with dentin iris (p＝0.034). Using $ONE-STEP^{\circledR}$, the shear bond strength with metal iris was significant higher than those with dentin iris (p＝0.005), but not in $ALL-BOND^{\circledR}$ 2 (p＝0.774). The incidence of cohesive failure was very lower than other shear bond strength tests that did not use iris method. Conclusions：The iris method may significantly reduce the cohesive failures in the substrates. According to the bonding agent systems. the shear bond strength was affected by the cavity wall property.

• Journal of Korea Multimedia Society
• /
• v.13 no.3
• /
• pp.438-456
• /
• 2010

Iris recognition uses a unique iris pattern of user to identify person. In order to enhance the performance of iris recognition, it is reported that the diameter of iris region should be greater than 200 pixels in the captured iris image. So, the previous iris system used zoom lens camera, which can increase the size and cost of system. To overcome these problems, we propose a new method of enhancing the accuracy of iris recognition on low-resolution iris images which are captured without a zoom lens. This research is novel in the following two ways compared to previous works. First, this research is the first one to analyze the performance degradation of iris recognition according to the decrease of the image resolution by excluding other factors such as image blurring and the occlusion of eyelid and eyelash. Second, in order to restore a high-resolution iris image from single low-resolution one, we propose a new method based on multiple multi-layered perceptrons (MLPs) which are trained according to the edge direction of iris patterns. From that, the accuracy of iris recognition with the restored images was much enhanced. Experimental results showed that when the iris images down-sampled by 6% compared to the original image were restored into the high resolution ones by using the proposed method, the EER of iris recognition was reduced as much as 0.133% (1.485% - 1.352%) in comparison with that by using bi-linear interpolation

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.6
• /
• pp.1244-1250
• /
• 1997

An arbitrary shaped iris in rectangular waveguideis investigated using FEM-CDMA with triangularprism elements in this paper. The volume of irisis subdivided into a relatively small number of triangular prism elements and FEM is used to formulate the field distribution. On the other hand, the fields in the waveguide region are represented by BIM derived from the waveguide Green's function and boundary conditions. The proposed method is verified through the design and experiment for the circular iris filter using WR-90 waveguide.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.10
• /
• pp.53-59
• /
• 1997

In this paper, we present a 20 GHz low-loss dual-mode channel filter designed by using mode matching method. The performance of dual-mode channel filter mainly depends on iris characteristics. Therefore the exact design of iris is the key point to get good frequncy response of the filter. MOde matching technique is widely used ot design several kinds of waveguide filters because it is simple in theory and can easily calculate the scattering matrices at the discontinuities with simple structure like iris coupled filters. Additionally the effect for finite thickness of the iris in the dual-mode cavity iflter is analyzed by te full-wave method, providing the exact filter implementation without trial and error.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.7
• /
• pp.1175-1181
• /
• 2001

An efficient hybrid method is proposed to analyze discontinuities in a rectangular waveguide. Only with a small number of meshes around a discontinuity, the typical finite element method is shown to give an exact solution through several iterative updates of the boundary conditions. To show the validity of the proposed method, a simple circular aperture in a rectangular waveguide is analyzed and its result is compared with FEBIM.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.2 s.93
• /
• pp.128-133
• /
• 2005

An iris-coupled partial H-plane filter as a new type of partial H-plane filter is proposed. The proposed filter can be compared with conventional H-plane filter and uses an iris-type evanescent waveguide as a coupling structure. Filter design technique based on numerical simulation is developed to design and compare the proposed filter and H-plane filter. Designed iris-coupled partial H-plane filter has the same frequency response as that of the conventional H-plane filter while its cross section is one quarter. A good agreement between measurements and theoretical prediction is achieved.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.754-757
• /
• 2003

In Oriental medicine, the shape of collarette that formed with position in iris of patients often used by health diagnotcian to grasp health condition. In this paper, we present method that effectively extract collarette that exist in Iris image. After proposed method detert iris area using circular edge detector, derides boundary candidate point through radial line search and threshold value establishment. And boundary candidate line is treated to use nearest neighbor calculation at each boundary candidate point, finally extracts collarette through linear interpolation. As a result of experimenting about iris images, We Confirmed that can be used as assistant tool of diagnostic system that can presume state of ventriculus of human body.

• Journal of the HCI Society of Korea
• /
• v.11 no.1
• /
• pp.11-19
• /
• 2016

This study aimed to assess the economic value of the UX design and applied contingent valuation method (CVM) to the three smartphone screen unlock interface types: touch, fingerprint, and iris recognition. The contingent valuation method was chosen from various economic valuation approaches because the interface components such as the screen unlock are important user experience values but non-market goods which are not traded independently. Using the double-bounded dichotomous choice approach of the contingent valuation method, the survey results of the logit model showed that the economic value of touch unlock interface was 529 won, fingerprint was 4,214 won, and iris recognition was 1,316 won. That is, the fingerprint interface had the highest economic value, followed by iris recognition and touch interface. The main contribution of this research is that we examined a method for economic valuation of the UX design and generated systematic and credible results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.4
• /
• pp.530-538
• /
• 1999

In this paper, design of rectangular iris waveguide filter for the microwave broadcasting transponder using WR137 is applied to the modified ${TE^x}_{mn}$ mode theory in order to exactly analyze the characteristic of the waveguide discontinuity. We designed and fabricated the rectangular iris waveguide filter with the bandwidth 47 MHz for the microwave broadcasting transponder applied the conjugate gradient method to the modified ${TE^x}_{mn}$ mode theory. The results show a good characteristics that the $S_{11}$ and $S_{21}$ are -23 ㏈, -0.56 ㏈ and the maximum VSWR is below 1.02 in the passband.

• Journal of KIISE:Software and Applications
• /
• v.30 no.9
• /
• pp.876-884
• /
• 2003

It is essential to identify both the pupil and iris boundaries for iris recognition. The circular edge detector proposed by Daugman is the most common and powerful method for the iris region extraction. The method is accurate but requires lots of computational time since it is based on the exhaustive search. Some heuristic methods have been proposed to reduce the computational time, but they are not as accurate as that of Daugman. In this paper, we propose a pupil and iris boundary finding algorithm which is faster than and as accurate as that of Daugman. The proposed algorithm searches the boundaries using the Daugman's circular edge detector, but reduces the search region using the problem domain knowledge. In order to find the pupil boundary, the search region is restricted in the maximum and minimum bounding circles in which the pupil resides. The bounding circles are obtained from the binarized pupil image. Two iris boundary points are obtained from the horizontal line passing through the center of the pupil region obtained above. These initial boundary points, together with the pupil point comprise two bounding circles. The iris boundary is searched in this bounding circles. Experiments show that the proposed algorithm is faster than that of Daugman and more accurate than the conventional heuristic methods.