• Journal of Biomedical Engineering Research
• /
• v.30 no.3
• /
• pp.199-204
• /
• 2009

Iridium oxide films (IROFs) have been extensively studied as a material for electrical stimulation of neurons, as iridium oxide has higher charge storage capacity than other metal films. More recently, sputtered iridium oxide film (SIROF) has been studied, because it can be made more conveniently than activated iridium oxide film (AIROF). Typically, the SIROFs are grown at temperatures from 400 to 600 $^{\circ}C$. However, such high temperatures cannot be used when the iridium oxide (IrOx) film is to be deposited on a flexible polymer material, such as polyimide. In this paper, we show that we can still obtain excellent characteristics in SIROFs grown without heating (cold SIROF), by optimizing the growth conditions. We show that the oxygen flow rate is a critical parameter for controlling the surface properties of a cold SIROF. At an oxygen flow rate of 12 seem, the cold SIROF exhibited a charge storage capacity (CSC) of 60 mC/cm$^2$, which is comparable to or better than other published values for iridium oxide films including heated SIROFs. The film produced under these conditions also had the minimum impedance value of all cold SIROFs deposited for this study. A stability test and biocompatibility test also demonstrated the superiority of the optimized cold SIROF.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.10
• /
• pp.1565-1568
• /
• 2005

A surface renewable pH electrode was prepared by utilizing composite electrode technique. Iridium oxide micro-fine particles was prepared by hydrolysis of $(NH_4)_2IrCl_6$ at elevated temperature. The iridium oxide particles were mixed with well-dispersed carbon black and then filtered. The mixture was suspended in DMF containing PVC as a binder. The mixture was precipitated rapidly by adding large amount of water. The precipitate was ground and pressure-molded to iridium oxide composite electrode material. The electrode showed linear response between pH 1-13 with 50 to 60 mV/pH slope. The electrode maintained the pH response without appreciable slope drift for 170 days if stored in deionized water. The electrode surface can be renewed reproducibly by simple grinding process whenever contaminated or deactivated.

• Journal of the Korean Electrochemical Society
• /
• v.16 no.2
• /
• pp.70-73
• /
• 2013

Iridium oxide is well known as an electrocatalyst for the water oxidation. Recently, Dr. Bard's group observed the electrocatalytic behavior of individual nanoparticle of Iridium oxide using the electrochemical amplification method by detecting the single nanoparticle collisions at the ultramicroelectrode (UME). However, the electrocatalytic current is decayed as a function of time. In this study, we investigated that the reason of electrocatalytic current decay of water oxidation at Iridium oxide nanoparticles. We identified it is due to the bubble overpotential because the cyclic current decay and recovery were synchronized to the oxygen bubble growth and coming away from an Iridium disk electrode.

• Journal of the Korean Vacuum Society
• /
• v.4 no.S2
• /
• pp.156-162
• /
• 1995

For a stimulating neural electrode, the charge density should be as large as possible to provide adequate stimulation of the nervous system while allowing for miniaturization of the electrode. Since iridium oxide is able to produce high charge densities while preventing undesirable reactions due to charge storage, it has become a promising material for neural prostheses. Successful production of stable Ir and Ir oxide films on various substrates now limits the use of this material. Ir was deposited on two differently prepared surface of (mirror finish, passivation) surgical Ti-6AI-4V with several methods. Ion beam mixing of sputter deposited Ir films on passivated Ti-6AI-4V produced stable and good adherent Ir films. It was found that the increase in charge density of pure Ir on continuous cyclingis due to the accumulation of the oxide phase ( associated with a large surface area) in which the valence state of iridium changes and the double-layer capacitance increases. This study also showed that the double layer capacitance is equally or even more responsible for the high charge density of anodically formed Ir oxide.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1998.06a
• /
• pp.49-50
• /
• 1998

• Bulletin of the Korean Chemical Society
• /
• v.35 no.8
• /
• pp.2519-2522
• /
• 2014

Recently, the observation of the electrocatalytic behavior of individual nanoparticles (NPs) by electrochemical amplification method has been reported. For example, the Iridium oxide ($IrO_x$) NP collision on the Pt UME was observed via electrocatalytic water oxidation. However, the bare Pt UME had poor reproducibility for the observation of NP collision signal and required an inconvenient surface pre-treatment for the usage. In this manuscript, we has been investigated other metal electrode such as Cu UME for the reproducible data analysis and convenient use. The $IrO_x$ NP collision was successively observed on the bare Cu UME and the reproducibility in collision frequency was improved comparing with previous case using the $NaBH_4$ pre-treated Pt UME. Also, the adhesion coefficient between NP and the Cu UME was studied for better understanding of the single NP collision system.

• Journal of the Korean institute of surface engineering
• /
• v.40 no.5
• /
• pp.203-208
• /
• 2007

Preliminary studies were conducted to develop a dimensionally stable anode (DSA)electrode prepared by reactive sputtering method. The microstructure, surface morphology and electrochemical properties of iridium oxide $(IrO_2)$ coatings synthesized by unbalanced magnetron sputtering (UBMS) and conventional DSA electrode were compared. In addition, the possibilities of $IrO_2$ films synthesized by UMB on a real DSA electrode were investigated by electro-chemical application test. The degree of non-stoichiometry and surface area were closely related to the electro-chemical activity of the $IrO_2$ electrode. The feasibility of making a DSA electrode prepared by PVD technique was demonstrated through the present work.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1995.06a
• /
• pp.159-159
• /
• 1995

• Applied Chemistry for Engineering
• /
• v.34 no.5
• /
• pp.493-500
• /
• 2023

In this study, we developed an impedance sensor capable of controlling electrode polarization by coating iridium oxide (IrO_x) on the surface of the screen-printed carbon electrode. IrO_x was deposited on the surface of carbon electrodes according to the number of cycles (0~50 cycles) by cyclic voltammetry. Observation of scanning electron microscope images revealed that the size and number of IrO_x particles increased as the number of cycles increased. The changes in impedance responses as a function of the NaCl concentration of the as-obtained sensors were investigated using electrochemical impedance spectroscopy. The sensors manufactured in 50 cycles exhibited the best coefficient of determination and reproducibility, attributed to the well-controlled electrode polarization. We further demonstrated the usefulness of the IrO_x-based sensor as a diagnosis sensor for dry eye syndrome by comparing the results of the commercially available osmometer and our sensor using actual solution samples.

• Journal of the Korean institute of surface engineering
• /
• v.35 no.6
• /
• pp.401-407
• /
• 2002

Most of organic compounds discharged from industrial wastewater are treated by chemical oxidation, adsorption and biodegradable process. This process has been demanded a new advanced environmental wastewater treatment process. From this point of view, an electrochemical oxidation process using electrocatalysts has been developed for the destruction of organic compounds. Through this study, a ruthenium oxide/iridium oxide supported on titanium expanded metal was fabricated by thermal decomposition method and its performance was excellent during this experiment.