• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.14 no.9
• /
• pp.703-703
• /
• 2001

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.9
• /
• pp.452-455
• /
• 2006

The technology of wire explosion have been used to product nanopowders. A new concept was proposed to produce metallic nanosized powders, which is wire explosion in liquid media. We have exploded the Ag or Cu wires of diameter of O.3mm, 40mm long, in the de-ionized water or acetone, respectively. Electrical energy of 1.1kJ was stored in 10uF capacitor and released to the wires through a triggered spark gap switch. The process was observed by high-speed camera. Those images showed that the powders were generated by vapor condensation in the shell formed by shock wave in the water. The particles were directly dispersed into the water with collapse of the shell. The sizes of Ag and Cu nanopowders were evaluated to 35nm and 17nm, respectively.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.807-810
• /
• 2008

Permeable reactive barriers containing Zero-valent iron (ZVI) are used to purify ground-water contaminants. One of the representative contaminant is trichloroethylene (TCE). ZVI can act as a reducing agent of TCE. When ZVI is oxidized to Ferric iron, TCE reduced to Ethene, which is non-harmful matter. As a ZVI becomes ferric iron, the reducing effect decreases and iron becomes unavailable. So, constant reduction of TCE requires the regular supply of reducing agent. So, we use Iron-reducing bacteria(IRB) to extend the TCE degrading ability. We perform three experiment DI water, DI water with medium, and DI water with medium and IRB. By the experiment we try to found the dissolve ability.

• The Journal of Advanced Prosthodontics
• /
• v.12 no.3
• /
• pp.114-123
• /
• 2020

PURPOSE. The aim of this study was to evaluate the corrosion resistance of the specimens produced by five different commercial metal laser sintering (MLS) systems with their recommended Co-Cr alloy powders. MATERIALS AND METHODS. The MLS machines and the alloy powders used were, ProX 100-ST2724G (St-Pro), Mysint 100-EOS SP2 (SP2-Mys), EOSINT 270-EOS SP2 (SP2-EOS), SLM 100-Starbond CoS (SB-SLM), and MLab Cusing-Remanium^® Star (RS-MLab), respectively. Eight specimens from each group were prepared. Open circuit potential (E_ocp) and electrochemical impedance spectroscopy (EIS) measurements of polished surfaces of the specimens were conducted in a three-electrode cell using a potentiostat-galvanostat in Fusayama-Meyer artificial saliva (AS). Specimens from each group were immersed in AS and de-ionized water for seven days. E_ocp, charge transfer resistance (R_ct) values, and released ions (㎍/㎠ × 7d) in different solutions were determined. The specimen surfaces were observed with SEM/EDS. Results were analyzed statistically. RESULTS. E_ocp values have shifted to potentials that are more positive over time. Steady-state E_ocp values were from high to low as follows, SB-SLM, SP2-Mys, SP2-EOS, RS-MLab, and ST-Pro, respectively. After 60 mins, RS-MLab specimens had the highest R_ct value, followed by SP2-Mys, SB-SLM, SP2-EOS, and ST-Pro. In all groups, ion release was higher in AS than that in de-ionized water. CONCLUSION. There were small differences among the corrosion resistances of the Co-Cr alloy specimens produced with MLS systems; meanwhile, the corrosion resistances were quite high for all specimens.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.467-470
• /
• 2011

In this study, two different kind of impeller, commercial hand blender and manual type were used to investigate the most effective mixing method for simulant gel propellant. Ionized Water, Carbopol 941 and NaOH were used to produce the simulant gel for temperature of $25^{\circ}C$ and $50^{\circ}C$. The amount of bubbles produced during mixing of simulant gel at $50^{\circ}C$ were higher than that of simulant gel at $25^{\circ}C$. After 24 hours, bubbles of simulant gel made at $50^{\circ}C$ disappeared rapidly with respect to the bubbles of gel made at $25^{\circ}C$. Bubbles from blender did show notable amount even after 24 hours. Among mixing type, it was found that the pitched paddle impeller was the best candidate for the production of simulant gel.

• Journal of Powder Materials
• /
• v.20 no.3
• /
• pp.197-202
• /
• 2013

A novel route to prepare Nd-Fe-B magnetic particles by utilizing both spray drying and reduction/diffusion processes was investigated in this study. Precursors were prepared by spray drying method using the aqueous solutions containing Nd salt, Fe salt and boric acid with stoichiometric ratios. Precursor particles could be obtained with various sizes from 2 to $10{\mu}m$ by controlling concentrations of the solutions and the average size of $2{\mu}m$ of precursors were selected for further steps. After heat treatment of precursors in air, Nd and Fe oxides were formed through desalting procedure, followed by reduction processes in Hydrogen ($H_2$) atmosphere and with Calcium (Ca) granules in Argon (Ar) successively. Moreover, diffusion between Nd and Fe occurred during Ca reduction and $Nd_2Fe_{14}B$ particles were formed. With Ca amount added to particles after $H_2$ reduction, intrinsic coercivity was changed from 1 to 10 kOe. In order to remove and leach CaO and residual Ca, de-ionized water and dilute acid were used. Acidic solutions were more effective to eliminate impurities, but Fe and Nd were dissolved out from the particles. Finally, $Nd_2Fe_{14}B$ magnetic particles were synthesized after washing in de-ionized water with a mean size of $2{\mu}m$ and their maximum energy product showed 9.23 MGOe.

• Journal of Environmental Health Sciences
• /
• v.14 no.2
• /
• pp.51-64
• /
• 1988

It has been suggested that calcium is only one of many metals that compete with toxic metals in the body. Therefore, this study was carried out to determine the influence of water hardness on accumulation of heavy metals in rats. The seventy-five rats were divided into control and case groups. Case group was subdivided into four subgroups in proportion to the concentration of water hardness respectively, such as, 0, 250, 500, 1000ppm. Control group was fed on only deionized water, but case groups were fed on hard water with ionized heavy metals (Cd 150mg + Pb 300mg + Cu 300mg/l) for 20, 40, 60 days. The concentrations of cadmium, lead and copper were measured by atomic absorption spectrophotometry (Perkin Elmer 2380) in livers and kidneys. The results of the study are summarized as following 1. The concentration of cadmium accumulation showed the tendency of decrease in proportion to water hardness in both livers and kidneys of rats having been fed for only 60 days, respectively. 2. In only livers of rats having been fed for 60 days, essential metal, copper had the tendency of decrease according as hardness in water. 3. It was impossible to compare case with control about the tendency of lead accumulation because there was no difference between the two in livers and kidneys respectively.

• Food Science of Animal Resources
• /
• v.28 no.5
• /
• pp.529-534
• /
• 2008

This study was conducted to determine the effects of ion water and premixed mineral supplementation on the growth performance, carcass, and meat quality parameters in finishing pigs (LY$\times$D). Each 20 pigs were randomly allotted to three treatments; CON (basal diet), T1 (CON diet added active water), T3 (T1 diet added 1.0% premixed mineral). Used ion water and premixed mineral consisted mainly of Zn and Si, respectively. Cholesterol content (mg% meat) were not differ significantly in the samples, however, the ratios of cholesterol to fat in T1 and T2 was significantly lower than the control (p<0.05). The fatty acid qualities of palmitic acid, linoleic acid, arachidonic acid, SFA (saturated fatty acid), EFA (essential fatty acid), and EFA/UFA ratio were the highest significantly, however, those of the oleic acid, UFA (unsaturated fatty acid), and UFA/SFA ratio were the lowest significantly in T2 (p<0.05). The amino acid levels of glutamic acid, alanine, leucine, lysine, total amino acids, and EAA (essential amino acid) were the highest in T1 (p<0.05). Whereas, the levels of serine, valine, isoleucine were the highest in T2 (p<0.05). The results indicate that dietary ionized water and premixed mineral affects fatty acid composition and improves amino acid composition.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.49 no.2
• /
• pp.184-189
• /
• 2016

We investigated physiological changes in the freshwater cichlid, fish Maylandia lombardoi in response to different calcium concentrations in rearing water. Four different calcium concentrations (0, 2, 4 and 8 mM) were prepared in rearing water by the addition of ionized calcium (CaO) to examine the effect of various calcium concentrations in rearing water on physiological changes in the cichlid fish, M. lombardoi. Total calcium concentrations in plasma and body increased in a calcium concentration-dependent manner and reached the maximum at 8-mM calcium concentration. Stress-related cortisol was significantly decreased in the 8-mM group compared to the control group (0 mM). Lysozyme activity also significantly decreased in the 8-mM group. These results suggest that CaO in rearing water increases calcium uptake in fish and affects the body by decreasing stress and improving immunity in fish.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2013.05a
• /
• pp.170-170
• /
• 2013

We present a novel etching technique for 2-dimentional (2-D) hexagonal boron nitride (h-BN) by using capacitively coupled plasma (CCP) of oxygen combined with a post-treatment by de-ionized (DI) water. Oxygen CCP etching process for h-BN has been systematically studied. It is found that a passivation layer was generated to obstruct further etching while it can be easily and radically removed by DI water. An essential cleaning effect also has been observed in the etching process, organic residues are successfully removed and the surface roughness has much decreased. Considering h-BN is the most important 2-D dielectric material and its potential application for graphene to silicon-based electronic devices, such an etching method can be widely used to control the 2-D h-BN thickness and improve the surface quality.