• 한국재료학회지
• /
• 제32권10호
• /
• pp.408-413
• /
• 2022

The oxygen evolution reaction (OER) is very sluggish compared to the hydrogen evolution reaction (HER). Considering this difference is essential when designing and developing a cost-effective and facile synthesis method for a catalyst that can effectively perform OER activity. The material should possess a high surface area and more active sites. Considering these points, in this work we successfully synthesized sheets of cobalt phosphate hydrate (CP) and sulphurated cobalt phosphate hydrate (CPS) material, using simple successive ionic layered adsorption and reaction (SILAR) methods followed by sulfurization. The CP and CPS electrodes exhibited overpotentials of 279 mV with a Tafel slope of 212 mV dec^-1 and 381 mV with a Tafel slope of 212 mV dec^-1, respectively. The superior performance after sulfurization is attributed to the intrinsic activity of the deposited well-aligned nanosheet structures, which provided a substantial number of electrochemically active surface sites, speeded electron transfer, and at the same time improved the diffusion of the electrolyte.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.472-475
• /
• 2005

The electrical performances of liquid crystal (LC) cells with chloromethylated polyimide (CMPI) alignment layers were investigated. The CMPI layer was previously reported as a multifunctional layer that does role of LC alignment and planarization layer as well as photo-alignment material with high photosensitivity and excellent thermal stability. The capacitance-voltage (C-V) characteristics of LC cells with CMPI alignment layers were measured. Mechanical rubbing of the CMPI layer did not generate much difference in residual DC when compared to commercial PI. However, the LC cell with photo-oxidation CMPI layer shows a high residual DC value and a corresponding low voltage holding ratio (VHR) due to the photo-induced ionic charges on the alignment layer.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 추계학술대회 논문집
• /
• pp.316-317
• /
• 2009

The ion-exchange membrane, Nafion, remains as the benchmark for a majority of research and development in IPMC technology. In this research, we employed a novel ionomer named by sulfonated poly(styrene-ran-ethylene) (SPSE) that is crosslinked by UV irradiation. The sulfonic acid groups were stable during the UV irradiation crosslinking process. Water uptake, ion exchange capacity, and proton conductivity are characterized for both pure SPSE and crosslinked SPSE membrane. The bending responses of SPSE actuators under both direct current (DC) and alternating current (AC) excitations were investigated. The voltage-current behaviors of the actuators under AC excitations are also measured. Results showed the crosslinked SPSE actuators have better electromechanical performance than that of pure SPSE actuator with regard to tip displacement as a novel smart material.

• Smart Structures and Systems
• /
• 제20권4호
• /
• pp.499-508
• /
• 2017

The ionic polymer-metal composite (IPMC) is an electroactive polymer material and has a promising potential as actuators for propulsion and locomotion in underwater systems. In this paper a physics based model is used to analyse the actuation dynamics of the IPMC propulsor. Moreover, proportional-integral (PI) controller is used for position control of the tip displacement of IPMC propulsor. PI parameter tuning is performed using particle swarm optimization (PSO) algorithm. Several performance indices have been used as an objective function to optimize the error of the system. Finally, the best tuning method is found out by comparing the results under various performance indices.

• The Korean Journal of Ceramics
• /
• 제4권2호
• /
• pp.151-155
• /
• 1998

The total electrical conductivity, ionic conductivity, and nonstoichimetry of a new cathode material $Y_{1-x}Ca_xFeO_{3-\delta}$ (x=0.1) were measured as functions of temperature ($900\leqT/^{\circ}C\leq1100$) and oxygen partial pressure $(10^{-6}\leqPo_2/atm\leq0.21$). Isothermal variations of these properties with $Po_2$ support that the majority type of ionic defects are anti-Frenkel disorder which, however, has seldom been considered for perovskite-based oxides. The results are discussed in comparison with those reported on similar oxides.

• The Korean Journal of Ceramics
• /
• 제7권1호
• /
• pp.11-15
• /
• 2001

A thermodynamic assessment for the ZrO$_2$-TiO$_2$ system has been conducted. An optimal thermodynamic data set for this system is evaluated by the CALPHAD(CALculation of PHAse Diagram) method applied to experimental phase diagram and thermodynamic data. The liquid is described by ionic liquid model with two sublattices. The solubilities of the solid phases, tetragonal ZrO$_2$ and TiO$_2$(rutile), were described by subregular substitutional model with one sublattice. Two compounds, ZrTiO$_4$ and ZrTi$_2$O$_6$, are modeled as stoichiometric compounds.

• Journal of Electrochemical Science and Technology
• /
• 제4권3호
• /
• pp.108-112
• /
• 2013

Lithium diffusivity of the silicon (Si)-based materials of Si-Cu and $SiO_x$ (x = 0.4, 0.85) with improved interfacial stability to electrolyte have been determined, using variable rate cyclic voltammetry with film model electrodes. Lithium diffusivity is found to depend on the intrinsic properties of anode material and electrolyte; the fraction of oxygen for $SiO_x$ (x = 0.4, 0.85), which is directly related to electrical conductivity, and the electrolyte type with different ionic conductivity and viscosity, carbonate-based liquid electrolyte or ionic liquid-based electrolyte, affect the lithium diffusivity.

• 한국세라믹학회지
• /
• 제42권5호
• /
• pp.304-307
• /
• 2005

The possible configurations of hydroxyl group in hexagonal hydroxyapatite were identified through molecular orbital calculation. The molecular orbital interaction between O and H in hydroxyl column was analyzed using charge variation and Bond Overlap Population (BOP). We supposed 5 kinds of O-H bond configurations as cluster types of I, II, III, IV, and V. Mulliken's population analysis was applied to evaluate ionic charges of O, H, P, and Ca ions, and BOPs (Bond Overlap Populations) in order to discuss the bond strength change by the atomic arrangement. The stability of each O-H bond configuration was analyzed using bond overlap and ionic charge.

• 한국생산제조학회지
• /
• 제24권6호
• /
• pp.625-631
• /
• 2015

The hardness of surface treated magnesium alloy was evaluated using laser induced breakdown spectroscopy. The surface of the specimen was hardened mechanically, and the hardness profiles were measured using a traditional measurement technique. A laser beam was irradiated to generate a plasma, and the peaks of the components of the specimen were analyzed. A wavelength of 333.66 nm and 293.65 nm were selected as the atomic and ionic peaks, respectively. The ratios of the ionic peak to the atomic peak were obtained so as to compare the hardness profile. As the depth increased, the ratio decreased. These results are in good agreement with the previous hardness measurement results. It can be considered that this technique could be applied for remote and time-efficient hardness measurement.

• 한국막학회:학술대회논문집
• /
• 한국막학회 1998년도 춘계 총회 및 학술발표회
• /
• pp.124-126
• /
• 1998

1. INTRODUCTION : With good physical and chemical properties as a membrane material, poly(vinyl alcohol) (PVA) has been widely used for the preparation of several kinds of membranes for different applications. Considering such good physical chemical properties, some people have tried to use it for the formation of reverse osmosis (RO) membranes with a good chemical stability as well as high flux and high rejection rate. However, unfortunately, the performance of the RO membranes based on PVA has not been satisfactory yet. The PVA RO membranes thermally crosslinked have shown very low flux and relatively low salt rejection. In this experiment, ionic polymers such as sodium alginate and chitosan were used together with PVA to increase the nanofiltration performance of the PVA membranes.