• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.154.1-154.1
• /
• 2014

Indium gallium zinc oxide (IGZO)는 차세대 디스플레이 평판 패널에 사용되는 반도체 화합물의 일종으로 최근 주목받고 있는 물질의 하나이다. 기존의 IGZO를 사용하여 박막을 증착한 뒤 표면 처리를 통해 박막의 특성 변화에 대한 연구들이 진행되어 왔으며, 기존의 연구들은 plasma 환경에 노출을 시켜 간접적인 plasma treatment를 통해 박막의 특성을 향상시켜 왔다. 본 연구에서는 기존의 plasma treatment에서 발견된 방식인 ion beam treatment를 통해 플라즈마를 직접적으로 표면에 조사하여 박막의 특성 변화를 알아보았다. 한국표준과학연구원에서 자체 제작한 chamber를 이용하여 RF sputter로 Si wafer 위에 IGZO 박막을 증착하고 수소 ion beam treatment를 한 뒤, SEM과 XPS를 사용하여 박막 표면의 물성 변화를 분석하였다. 실험에 사용된 chamber에는 sputter gun과 ion beam이 함께 장착되어 있으며, scroll pump와 TMP를 사용하여 pressure를 유지하였다. 실험 시 base pressure는 $1.4{\times}10^{-6}Torr$였다. RF power 150 W. ion beam power 2,000 V에서 실험을 진행하였다.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1996.06a
• /
• pp.5-18
• /
• 1996

The solid state cesium ion source os alumino-silicate based zeolite which contains cerium. The material is an ionic conductor. Cesiums are stably stored in the material and one can extract the cesiums by applying electric field across the electrolyte. Cesium ion bombardment has the unique property of producing high negative ion yield. This ion source is used as the primary source for the production of a negative ion without any gas discharge or the need for a carrier gas. The deposition of materials as an ionic species in the energy range of 1.0 to 300eV is recently recognized as a very promising new thin film technique. This energetic non-thermal equilibrium deposition process produces films by “Kinetic Bonding / Energetic Condensation" mechansim not governed by the common place thermo-mechanical reaction. Under these highly non-equilibrium conditions meta-stable materials are realized and the negative ion is considered to be an optimum paeticle or tool for the purpose. This process differs fundamentally from the conventional ion beam assisted deposition (IBAD) technique such that the ion beam energy transfer to the deposition process is directly coupled the process. Since cesium ion beam sputter deposition process is forming materials with high kinetic energy of metal ion beams, the process provider following unique advantages:(1) to synthesize non thermal-equilibrium materials, (2) to form materials at lower processing temperature than used for conventional chemical of physical vapor deposition, (3) to deposit very uniform, dense, and good adhesive films (4) to make higher doposition rate, (5) to control the ion flux and ion energy independently. Solid state cesium ion beam sputter deposition system has been developed. This source is capable of producing variety of metal ion beams such as C, Si, W, Ta, Mo, Al, Au, Ag, Cr etc. Using this deposition system, several researches have been performed. (1) To produce superior quality amorphous diamond films (2) to produce carbon nitirde hard coatings(Carbon nitride is a new material whose hardness is comparable to the diamond and also has a very high thermal stability.) (3) to produce cesiated amorphous diamond thin film coated Si surface exhibiting negative electron affinity characteristics. In this presentation, the principles of solid state cesium ion beam sputter deposition and several applications of negative metal ion source will be introduced.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.6
• /
• pp.518-523
• /
• 2002

The influences of ion beam energy and reactive oxygen partial pressure on the physical and crystallographic characteristics of transition metal oxide compound(CrOx) film were studied in this paper. Chromium oxide films were deposited onto a cover-glass using ion Beam Sputter Deposition(IBSD) technique according to the various processing parameters. Crystallinity and grain size of as-deposited films were analyzed using XRD analysis. Thickness and Resistivity of the films were measured by $\alpha$-step and 4-point probe measurement. According to the XRD, XPS and resistivity results, the deposited films were the cermet type films which had crystal structure including amorphous oxide(a-oxide) phase and metal Cr phase simultaneously. The increment of the ion beam energy during the deposition process led to decreasing of metal Cr grain size and the rapid change of resistivity above the critical $O_2$ partial pressure.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.385-385
• /
• 2011

Ion beam Sputtering (IBS)를 이용한 물질 표면의 pattern 형성은 물리적 변수 조절로 손쉽게 nano structure의 크기와 형태를 조절할 수 있어 관심을 받고 있다. 본 연구발표에서는 massless Dirac Fermion behavior로 인한 highly carrier mobility와 같은 특성으로 인해 차세대 device material로 각광받고 있는 Graphene의 layered compound (층상구조) 형태인 HOPG (Highly Ordered Pyrolysis Graphite)에 IBS (Ion beam Sputtering)를 이용해 nano structure가 형성 가능함을 보이고 그 특징에 대해 소개하려 한다. HOPG(0001)를 Sputter 했을 때, 표면에 잘 정렬된 nano ripple pattern이 형성 가능함을 확인하였으며 sputter하는 시간을 변화하면 약 10 nm에서 80 nm까지 wavelength를 조절할 수 있다. 또한 이전의 IBS를 이용한 연구들에서 확인할 수 있는 다른 물질의 곧게 뻗은 nano ripple과는 다르게 ripple의 끝에 nano swab이 생기는 것을 AFM (Atomic Force Microscope)으로 확인할 수 있었다. 이러한 Graphite에서만 나타나는 Sputter에 의한 표면의 변화의 원인을 규명하고자 Sputter가 지속됨에 따라 나타나는 mopology의 roughness와 wavelength의 시간에 따른 dynamic scaling behavior를 확인하였고 그 얼개를 알기 위해 simulation을 수행 하였다.

• Journal of the Korean institute of surface engineering
• /
• v.29 no.5
• /
• pp.474-477
• /
• 1996

The solid state cesium ion beam sputter deposition system has been developed for negative carbon ion beam deposition. The negative carbon ion beams are effectively produced by cesium ion bombardment. The C-ion beam current and deposition energy can be independently controlled for the deposition of a-D films. This system is very compact, reliable and high flux without any gas discharge or plasma and has been successfully used in the studies of the ion beam deposited amorphous diamond(a-D)

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.11a
• /
• pp.431-431
• /
• 2007

In this paper, the LC alignment characteristics of the NDLC thin film deposited by PECVD and sputtering were reported respectively. The NDLC thin film deposited using sputter showed uniform LC alignment at the 1200 eV of the ion beam intensity and pretilt angle was about $2^{\circ}$ while the NDLC thin film deposited using the PECVD showed uniform LC alignment and high pretilt angle at the 1800 eV of the ion beam intensity. Concerning the ion beam intensity, uniform LC alignment of the NDLC thin film deposited by the sputtering was achieved at the lower intensity. And the pretilt angle of the NDLC thin film deposited by sputter was higher than those of NDLC thin film that was deposited using the PECVD. The uppermost of the thermal stability of NDLC thin film was $200^{\circ}C$, respectively. However, NDLC thin film deposited by the PECVD showed stability at high temperature without defects, compared to NDLC thin film deposited by the sputter.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.14 no.3
• /
• pp.747-754
• /
• 1990

Since Ion sputter machining can perform removing processing in atom or molecule units in vacuum state, it has the merit that high precision processing is possible. In this study, therefore, the effect of incidence ion beam is certified to processing amount and surface roughness when longtimed processing is applied. As a result, processing amount is made almost constant with time and the best processing condition is achieved when the incidencial angle of ion is 55.deg.. In addition, processing time for the good surface roughness is different respectively to the quality of material and longtimed processing has some defect for achieving good surface roughness.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1998.11a
• /
• pp.44-44
• /
• 1998

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.73-73
• /
• 1999

A large area negative metal ion beam source is developed. Kinetic ion beam of the incident metal ions yields a whole nucleation and growth phenomena compared to the conventional thin film deposition processes. At the initial deposition step one can engineer the surface and interface by tuning the energy of the incident metal ion beams. Smoothness and shallow implantation can be tailored according to the desired application process. Surface chemistry and nucleation process is also controlled by the energy of the direct metal ion beams. Each individual metal ion beams with specific energy undergoes super-thermodynamic reactions and nucleation. degree of formation of tetrahedral Sp3 carbon films and beta-carbon nitride directly depends on the energy of the ion beams. Grain size and formation of polycrystalline Si, at temperatures lower than 500deg. C is obtained and controlled by the energy of the incident Si-ion beams. The large area metal ion source combines the advantages of those magnetron sputter and SKIONs prior cesium activated metal ion source. The ion beam source produces uniform amorphous diamond films over 6 diameter. The films are now investigated for applications such as field emission display emitter materials, protective coatings for computer hard disk and head, and other protective optical coatings. The performance of the ion beam source and recent applications will be presented.

• Korean Journal of Metals and Materials
• /
• v.47 no.1
• /
• pp.26-31
• /
• 2009

The effects of $Ar/O_2$ ion-beam pre-treatment conditions on the interfacial adhesion energy of sputterdeposited Cu thin film to FR-4 substrate were systematically investigated in order to understand the interfacial bonding mechanism for practical application to advanced chip-in-substrate package systems. Measured peel strength increases from $45.8{\pm}5.7g/mm$ to $61.3{\pm}2.4g/mm$ by $Ar/O_2$ ion-beam pre-treatment with anode voltage of 64 V. Interfacial bonding mechanism between sputter-deposited Cu film and FR-4 substrate seems to be dominated by chemical bonding effect rather than mechanical interlocking effect. It is found that chemical bonding intensity between carbon and oxygen at FR-4 surface increases due to $Ar/O_2$ ion-beam pretreatment, which seems to be related to the strong adhesion energy between sputter-deposited Cu film and FR-4 substrate.