• Title/Summary/Keyword: Ion gel

Search Result 793, Processing Time 0.021 seconds

Quasi-Solid-State Polymer Electrolytes Based on a Polymeric Ionic Liquid with High Ionic Conductivity and Enhanced Stability

  • Jeon, Nawon;Jo, Sung-Geun;Kim, Sang-Hyung;Park, Myung-Soo;Kim, Dong-Won
    • Journal of Electrochemical Science and Technology
    • /
    • v.8 no.3
    • /
    • pp.257-264
    • /
    • 2017
  • A polymeric ionic liquid, poly(1-methyl 3-(2-acryloyloxypropyl) imidazolium iodide) (PMAPII), was synthesized as a single-iodide-ion-conducting polymer and employed in a gel polymer electrolyte. Gel polymer electrolytes prepared from iodine, 4-tert-butylpyridine, ${\gamma}$-butyrolactone, and PMAPII were applied in quasi-solid-state dye-sensitized solar cells (DSSCs). The addition of 16 wt.% PMAPII provided the most favorable environment, striking a compromise between the iodide ion concentration and the ionic mobility, which resulted in the highest conversion efficiency of the resulting DSSCs. The quasi-solid-state DSSC assembled with the optimized gel polymer electrolyte exhibited a relatively high conversion efficiency of 7.67% under AM 1.5 illumination at $100mA\;cm^{-2}$ and better stability than that of the DSSC with a liquid electrolyte.

Effect of buffer layers on preparation of Sol-Gel processed PZT thin films (Sol-Gel법에 의한 PZT박막 제조에서 완충층의 영향)

  • 김종국;박지련;박병옥
    • Journal of the Korean Crystal Growth and Crystal Technology
    • /
    • v.8 no.2
    • /
    • pp.307-314
    • /
    • 1998
  • PZT thin films were fabricated by the Sol-gel method. Starting materials used for the preparation of the stock solution were Pb-acetate trihydrate, Zr-normal propoxide and Ti-isopropoxide. 2-Methoxyethanol and iso-propanol were used for solution. For studying the diffusion of Pb ion into the substrates. We used bare Si substrate, $SiO_2/Si$ substrates which was produced by thermal oxidation and $TiO_2/SiO_2/Si$ which was mad by Sol-gel method. Densification and adhesion of thin films were observed by SEM. Phase formation of thin films and diffusion of Pb ion into the substrate were examined by XRD and ESCA, respectively. In the case of bare Si and $SiO_2/Si$ substrate, we obtained the perovskite phase at $700^{\circ}C$ and restricted a little the diffusion of Si ion into the film with $SiO_2$ buffer layer. In the case of $TiO_2/SiO_2/Si$, perovskite phase were obtained at $500^{\circ}C$ and the diffusion of Pb ion and Si ion were restriced.

  • PDF

Purification and Characterization of Extracellular Protease form Psychrotrophic Antarctic Bacteria (남극에서 분리한 저온성 세균 유래 단백질 분해 효소)

  • 조기웅;방지헌;홍혜원;박승일;이윤호
    • Korean Journal of Microbiology
    • /
    • v.38 no.4
    • /
    • pp.254-259
    • /
    • 2002
  • A psychrotrophic bacterium was isolated from Antarctic marine sediment and identified as Shewanella sp. species based on the biochemical properties and 16S rRNA sequence, and designated as Shewanella sp. L93. Extracellular protease produced by this strain was purified through ammonium sulfate precipitation, High-Q column chromatography, first gel permeation chromatography, BioScale Q2 ion exchange chromatography and second gel permeation chromatography, and basic properties of this enzyme were investigated.

Electrochemical Performances of Lithium-ion Polymer Battery with Polyoxyalkylene Glycol Acrylate-based Gel Polymer Electrolyte (Polyoxyalkylene Glycol Acrylate기 Gel Polymer Electrolyte를 적용한 리튬이온폴리머전지의 전기화학적 특성)

  • Kim, Hyun-Soo;Kim, Sung-Il;Na, Seong-Hwan;Moon, Seong-In
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.18 no.2
    • /
    • pp.142-147
    • /
    • 2005
  • In this work, a gel polymer electrolyte (GPE) was prepared using polyoxyalkylene glycol acrylate (POAGA) as a macromonomer LiCoO$_2$/GPE/graphite cells were prepared and their electrochemical properties were evaluated at various current densities and temperatures. The ionic conductivity of the GPE was more than 6.2${\times}$10$^{-3}$ S$.$$cm^{-1}$ / at room temperature. The GPE had good electrochemical stability up to 4.5 V vs. Li/Li$^{+}$. POAGA-based cells were showed good electrochemical performances such as rate capability, low-temperature performance, and cycleability. The cells, also, passed a safety test such as the overcharge and nail-penetration test.t.

Purification and Properties of Isocitrate Lyase from Saccharomycopsis lipolytica (Saccharomycopsis lipolytica Isocitrate Lyase의 정제와 성질)

  • 조석금
    • Microbiology and Biotechnology Letters
    • /
    • v.15 no.6
    • /
    • pp.420-424
    • /
    • 1987
  • Isocitrate lyase from crude extract of Saccharomycopsis lipolytica ATCC44601 and MX9-11RX8 temperature-sensitive mutant was purified about 54 times and 87 times, respectively by ammonium sulfate fractionation, Toyo peal HW-55F gel filtration and DEAE-Cellulose ion exchange chromatography, The molecular weight of the purified isocitrate lyase from this yeast was estimated to be 230, 000 by gel filtration on Sephadex G-200, and SDS-polyacrylamide Eel electrophoresis showed that the enzyme consisted of four identical or similar subunits with a molecular weight of 59, 000 and the enzyme showed optimum activity at pH 6.9.

  • PDF

A Study on Urethane-Based Gel Polymer Electrolyte for Lithium ion Battery (리튬이온전지용 Urethane기 겔폴리머전해질에 관한 연구)

  • 김현수;김성일;최관영;문성인;김상필
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.15 no.12
    • /
    • pp.1033-1038
    • /
    • 2002
  • In this study, urethane acrylate macromer was synthesized and it was used in a gel polymer electrolyte (GPE), and then its electrochemical performances were evaluated. LiCoO$_2$/GPE/graphite cells were Prepared and their performances depending on discharge currents and temperatures were evaluated. The precursor consisting of urethane acrylate (UA), hexanediol dimethacrylate (HDDA) and benzoyl peroxide (BPO) had a low viscosity relatively ionic conductivity of the gel polymer electrolyte with UA at room temperature and -20$\^{C}$ was ca. 4.5 $\times$ 10$\^$-3/S$.$cm$\^$-1/ and 1.7 x 10$\^$-3/ S$.$cm$\^$-1/, respectively GPR was stable electrochemically up to potential of 4.i V vs. Li/Li$\^$+/. LiCoO$_2$/GPE/graphite cells showed good a high-rate and a low-temperature performance.

Electrochemical Properties of Lithium-Ion Polymer Battery with PMMA IPN-Based Gel Polymer Electrolyte (PMMA IPN계 겔폴리머전해질을 채용한 리튬이온폴리머전지의 전기화학적 특성)

  • 김현수;신정한;나성환;엄승욱;문성인;김상필
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.16 no.11
    • /
    • pp.994-1000
    • /
    • 2003
  • In this study, gel polymer electrolytes (GPE) with semi-interpenerating network of poly (methyl methacrylate) and hexanediol dimethacrylate were synthesized and their electrochemical performances were evaluated. LiCoO$_2$/GPE/graphite cells were prepared and their performances depending on discharge currents and temperatures were evaluated. The precursor containing 5 vol% curable mixture had a low viscosity relatively. GPE showed good electrochemical stability up to potential of 4.8 V vs. Li/Li$\^$+/. Ionic conductivity of the gel polymer electrolyte at room temperature and -20$^{\circ}C$ was ca. 5.9 and 1.4${\times}$10$\^$-3/ Scm$\^$-1/, respectively. LiCoO$_2$/GPE/graphite cells showed good rate capability, low-temperature performance and cycleability.

Identification and Isolation of Juvenile Hormone Binding Protein from Hemolyrnph of Lymantria dispar L. (매미나방(Lymantria dispar)에서 Juvenile Hormone Binding Protein(JHBP)의 확인 및 정체)

  • 이인희;김학열
    • The Korean Journal of Zoology
    • /
    • v.34 no.2
    • /
    • pp.196-202
    • /
    • 1991
  • Juvenile honnone binding protein (JHBP) was identified in the last instar larval hemolymph of Lymantria dispar using dextran coated charcoal (DCC) binding assay and gel filtration. The p1 value of JHBP was estimated to be 5.3. JHBP was partially pudfied by polyethylene glycol(PEG) precipitation, DEAE-cellulose ion-exchange chromatography and gel filtration, and was confirmed by DCC binding assay.

  • PDF

Evaluate the Suitability of MC3T3 Cells to Antibacterial Ag-30CaO·70SiO2 Gel (항균성 Ag-30CaO·70SiO2 Gel의 MC3T3 세포적합성에 관한 연구)

  • Yoon, Geum-Jae;Ryu, Jae-Kyung;An, Eung-Mo;Kim, Yun-Jong;Kim, Taik-Nam;Noh, In-Sup;Cho, Sung-Beck
    • Korean Journal of Materials Research
    • /
    • v.24 no.12
    • /
    • pp.671-676
    • /
    • 2014
  • It is known that bones get damaged by accidents and aging. Since the discovery of Bioglass, various kinds of ceramics have been also found to bond to living bone; some of these ceramics are already being clinically used as bone-repairing materials. In the present study, antibacterial calcium silicate gel ($Ag-30CaO{\cdot}70SiO_2$ gel) was prepared by sol-gel method in order to control the microstructure, which is related to the dissolution rate and induction period of apatite formation in body environment. In addition, biological $Ag-30CaO{\cdot}70SiO_2$ is tested. This was done to impart antimicrobial activity to the $30CaO{\cdot}70SiO_2$. Ag ion was added during sol-gel synthesis to replace the $H_2O$ added during the making of the $30CaO{\cdot}70SiO_2$ gel, which has silver solutions of various concentration. After the sol-gel process, 1N-$HNO_3$ solution was used to wash the gel when synthesizing the gel, in order to maintain the porous structure and remove PEG, water soluble polymers. Then, the apatite forming ability of the sol-gel derived CaO-$SiO_2$ gels was investigated using simulated body fluid (SBF), which had almost the same ion concentration as that of human blood plasma. The gels were analyzed by FT-IR spectroscopy, SEM observation, XRD, and fluorescent microscopy. The apatite was successfully created even after washing the gel; apatite is present in an amorphous state, and was found to affect the concentration of the Ag ion in cells in MC3T3 live & dead assay results. From these results, it is suggested that a good material that can be used to repair defects of nature bone is $Ag-30CaO{\cdot}70SiO_2$ gel.

The Preparation of Low Methoxyl Pectin Gel and LMP Apple Jelly with Pectinesterase Isolated from Aspergillus Japonicus (Aspergillus japonicus에서 추출한 Pectinesterase를 이용한 Low Methoxyl Pectin Gel 및 LMP 사과 Jelly 제조에 관한 연구)

  • Choi, Jung-Sun;Oh, Hea-Sook;Yoon, Sun
    • Korean journal of food and cookery science
    • /
    • v.11 no.5
    • /
    • pp.542-547
    • /
    • 1995
  • Pectinesterase was isolated from the culture medium of Aspergillus japonicus and partially purified by DEAE-Sephadex batchwise, Sephadex G-75 gel filtration and ion exchange chromatography. The purified enzyme solution was completely free from polygalacturonase which depolymerizes pectin molecule. The ability of the pectinesterase to demethylate high methoxyl pectin was investigated. On 20 minute of incubation methoxyl content of low methoxyl pectin decreased from 88% to 6.93%. In general gel prepared with the pectin containing lower methoxyl content showed the lower value of percent sag, and showed the hieher Bel strength. Textural characteristics of pectin gel determined by Rheometer showed that as the methoxyl content was lowered, hardness and resilience of the gel were increased and cohesiveness was decreased. Apple juice containing HMP and organic acids can be converted into low methoxyl pectin apple jelly by the action of pectinesterase and addition of calcium ion. The strength of low methoxyl pectin apple jelly increased when it stored at room temperature.

  • PDF