• Korean Journal of Clinical Laboratory Science
• /
• v.36 no.2
• /
• pp.115-120
• /
• 2004

A bulk liquid membrane system was introduced for selective separation of an amino acid mixture. We confirmed p-diamethylaminobenzaldehyde (DAB), sulfosalicylic acid (SSA) and 1-naphtol were very useful carriers for selective separation of an amino acid mixture. As a result, Ala, Leu, Val, Phe and Ile were successfully separated by SSA, 1-naphtol in basic condition, 1-naphtol in weak acidic condition, DAB in strong acidic condition and DAB in strong basic condition. The separation mechanism was proposed by ion pair mechanism in the case of SSA and 1-naphtol and Imine bond formation mechanism was also introduced for DAB.

• Tribology and Lubricants
• /
• v.23 no.1
• /
• pp.14-18
• /
• 2007

SCM415 alloy was implanted with nitrogen ions using plasma source ion implantation (PSII), at a dose range of $1{\times}10^{17}\;to\;6{\times}10^{17}N^{+}cm^{-2}$. Auger electron spectrometry (AES) was used to investigate the depth profile of the implanted layer. Friction and wear tests were carried out on a block-on-ring wear tester. Scanning electron microscopy (SEM) was used to observe the micro-morphology of the worn surface. The results revealed that after being implanted with nitrogen ions, the frictional coefficient of the surface layer decreased, and the wear resistance increased with the nitrogen dose. The tribological mechanism was mainly adhesive, and the adhesive wear tended to become weaker oxidative wear with the increase in the nitrogen dose. The effects were mainly attributed to the formation of a hard nitride precipitate and a supersaturated solid solution of nitrogen in the surface layer.

• Applied Chemistry for Engineering
• /
• v.7 no.5
• /
• pp.861-868
• /
• 1996

Skeletal isomerization reaction known as exothermic reaction shows possible maximum yield of i-butene from n-butene at $110^{\circ}C$ over $Pt/MoO_3/SiO_2$. Compared with conventional catalyst such as silica, zeolite, alumina etc., $Pt/MoO_3/SiO_2$ demonstrates higher yield while by-products except 2-butene do not form. Faster H spillover rate over $Pt/MoO_3/SiO_2$ is demonstrated via isothermal reduction experiment at $110^{\circ}C$ compared to the rate over $Pt/MoO_3/Al_2O_3$. Overall isomerization rates are proportional to higher spillover rates from Pt onto $MoO_3$ surface. The skeletal isomerization reaction is composed of two elementary steps. First, carbonium ion formation over Pt crystallites by H spillover. Second, carbenium ion formation over $MoO_3$ followed by formation of i-butene. Moreover, it is suggested that H spillover step from Pt surface onto $MoO_3$ is assumed to be the rate determining step and control the overall isomerization rate.

• Applied Chemistry for Engineering
• /
• v.20 no.2
• /
• pp.159-164
• /
• 2009

Monomers of oxetane high explosives were theoretically examined in terms of reactivity, reaction mechanism and process of polymerization substituted by azido $(-CH_2N_3)$, nitrato $(-CH_2ONO_2)$ and hydrazino $(-CH_2N_2H_3)$ which belong to the 5th class hazardous materials and have explosiveness under acid catalyst using MINDO/3, MNDO, and AMI methods for formal charge, heat of formation, and energy level. Nucleophilicity and base of oxetane high explosives could be explained by negative charge size of oxetane oxygen atom and reactivity of oxetane in the growth stage of polymerization under acid catalyzer could be expected to be governed by positive charge size of axial carbon atom and low LUMO energy of electrophile. It could be estimated that carbenium ion was more beneficial in the conversion process of oxetane high explosives than that of stabilization energy (13.90~31.02 kcal/mole) of oxonium ion. In addition, concentration of oxonium ion and carbenium ion in equilibrium state influenced mechanism and it was also estimated that $S_N1$ mechanism reacts faster than that of $S_N2$ in prepolymer growth stage considering quick equilibrium based on form and calculation of polymerization under acid catalyzer.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.8
• /
• pp.838-842
• /
• 2015

The Li-air battery is a promising candidate for the most energy-dense electrochemical power source because it has 5 to 10 times greater energy storage capacity than that of Li-ion batteries. However, the Li-air cell performance falls short of the theoretical estimate, primarily because the discharge terminates well before the pore volume of the air electrode is completely filled with lithium oxides. Therefore, the structure of carbon used in the air electrode is a critical factor that affects the performance of Li-air batteries. In a previous study, we reported a new class of carbon nanomaterial, named carbon nanoballs (CNBs), consisting of highly mesoporous spheres. Structural characterization revealed that the synthesized CNBs have excellent a meso-macro hierarchical pore structure, with an average diameter greater than 10 nm and a total pore volume more than $1.00cm^3g^{-1}$. In this study, CNBs are applied in an actual Li-air battery to evaluate the electrochemical performance. The formation mechanism and electrochemical performance of the CNBs are discussed in detail.

• Korean Journal of Metals and Materials
• /
• v.49 no.5
• /
• pp.400-405
• /
• 2011

ZnO nanotube arrays were synthesized by a two-step process: electrodeposition and selective dissolution. In the first step, ZnO nanorod arrays were grown on an Au/Si substrate by using a homemade electrodeposition system. ZnO nanorod arrays were then selectively dissolved in an etching solution composed of 0.125 M NaOH, resulting in hollow ZnO nanotube arrays. It is suggested that the formation mechanism of the ZnO nanotube arrays might be attributed to the preferred surface adsorption of hydroxide ion ($OH^{-1}$) on a positive polar surface followed by selective dissolution of the metastable Zn-terminated ZnO (0001) polar surface caused by the difference in the surface energy per unit area between the ZnO nanorod and nanotube.

• Economic and Environmental Geology
• /
• v.32 no.4
• /
• pp.373-378
• /
• 1999

An investigation was conducted to find out formation and is mechanism of kaolinite from pyrophyllite under hydrothermal conditions. First, a pyropyllite sample from the Heenam district, Korea, was activated by heat-treating at $400^{\circ}C$ for 3 hrs. The kaolinite powder was successfully obtained by subjecting the dried feedstock to autoclaving at $200^{\circ}C$, 15atm, pH<1 for 5days with addition of 17.4mol/l $AlCl_3$. Evidently, the $AlCl_3$ addition as a mineralizer strongly promoted incorporation of $Al^{3+}$ ion into pyrophyllite structure which was subdequently converted into kaolinite. It also indicated that the formation of octahedral feed solution. The final pH of the solution was decreased to ~0.3. The transformation reaction was not noticeably accelerated when 10wt% natural kaolinite was added as the seeds, suggesting that the transformation was not reconstructional, but substitutional type.

• Proceedings of the KIEE Conference
• /
• 2008.09a
• /
• pp.233-234
• /
• 2008

We observed internal space charge behavior for two types of epoxy composites under dc electric fields to investigate the influence of water at high temperature. In the case of glass/epoxy specimen, homocharge is observed at water-treated specimen, and spatial oscillations become clearer in the water-treated specimens. Electric field in the vicinity of the electrodes shows the injection of homocharge. In aramid/epoxy specimens, heterocharge is observed at water-treated specimens, i.e. negative charge accumulates near the anode, while positive charge accumulates near the cathode. Electric field is enhanced just before each electrode. In order to further examine the mechanism of space charge formation, we have developed a new system that allows in situ space charge observation during ion migration tests at high temperature and high humidity. Using this in situ system.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.2307-2308
• /
• 2008

We observed internal space charge behavior for two types of epoxy composites under dc electric fields to investigate the influence of water at high temperature. In the case of glass/epoxy specimen, homocharge is observed at water-treated specimen, and spatial oscillations become clearer in the water-treated specimens. Electric field in the vicinity of the electrodes shows the injection of homocharge. In aramid/epoxy specimens, heterocharge is observed at water-treated specimens, i.e. negative charge accumulates near the anode, while positive charge accumulates near the cathode. Electric field is enhanced just before each electrode. In order to further examine the mechanism of space charge formation, we have developed a new system that allows in situ space charge observation during ion migration tests at high temperature and high humidity. Using this in situ system.

• Bulletin of the Korean Chemical Society
• /
• v.12 no.4
• /
• pp.368-370
• /
• 1991

The electrochemical behavior and the complex formation between N$i^{2+}$ and 1,7-diazs-15-crown-5 and 1,10-diaza-18-crown-6 in acetonitrile solution have been studied by DC polarography, differential puke polarography and cyclic voltammetry. Nickel(Ⅱ) complexes gave a single well-defined wave. The formation constants of their complexes were 1$0^{4.89} and 10^{3.86}$, respectively. Nickel(Ⅱ) ion was found to form complexes of 1-to-1 composition with 1,7-diaza-15-crown-5 and 1,10-diaza-18-crown-6. In addition, reduction steps were irreversible and the reduction current were diffusion controlled. The electrochemical reduction mechanism of Ni(Ⅱ)-macrocyclic diaza-crown complexes in acetonitrile solution is estimated.