• 제목/요약/키워드: Ion extraction

검색결과 607건 처리시간 0.027초

태양에너지이용을 위한 $TiO_2$ 박막의 제작과 특성 (Preparation and Properties of $TiO_2$ Films for Solar Energy Utilization)

  • 이길동
    • 한국태양에너지학회 논문집
    • /
    • 제30권3호
    • /
    • pp.90-97
    • /
    • 2010
  • $TiO_2$ thin films for solar energy utilization were prepared on ITO coated glass by r.f magnetron sputtering with variations of working pressure, oxygen flow rate and annealing temperature. Ion insertion and extraction reaction, and ion storage properties of films were investigated by using a cyclic voltammetry. Transmittance of thin films in as-prepared, colored and bleached states was measured by UV-VIS spectrophotometer. The samples deposited in our sputtering conditions showed poor electrochromic properties. Improvement in ion storage properties of $TiO_2$ thin film was observed after annealing at temperature of $400^{\circ}C$ in air for 2 hours. It was found that $TiO_2$ thin film in electrochromic device could be used as a passive counter-electrode.

염기성색소(鹽基性色素) Methylen Blue에 의(依)한 Oleic Acid의 흡광광도정량(吸光光度定量) (A Study on Spectrophotometric Determination of Oleic Acid by Basic Dye Methylen Bblue)

  • 이숙연
    • Journal of Pharmaceutical Investigation
    • /
    • 제4권1_2호
    • /
    • pp.46-54
    • /
    • 1974
  • A new spectrophotemetric method was estalished for the determination of oleic acid. This method is based on the 1,2-dichloroe-thane extraction of the ion-pair formed between methylene blue and oleic acid. But the absorbance of an ion-pair in the 1,2-dichloroe-thane layer was variable with the temperature, the ion-pair was extracted back into a diluted hydrochloric acid solution. The maximum absorbance of the acid extract observed at $660m{\mu}$ and a lineal relationship was observed from the initial amount over the range of $50-800{\gamma}/ml$ of oleic acid in the aqueous phase. The composition ratio of the ion-pair formed between methylene blue and oleic acid was determined to be 2 : 1 by both the mole ratio and continuous variation methods.

  • PDF

Synthesis and Binding Properties of a Calix[4]crown-6-functionalized Polymeric Ion Acceptor

  • Seol, Wan-Ho;Yang, Yu-Sun;Lee, Chil-Won;Gong, Myoung-Seon
    • Macromolecular Research
    • /
    • 제12권4호
    • /
    • pp.427-430
    • /
    • 2004
  • Calix[4]crown-6-2,4-bis(2-hydroxyethyl ether) (2), which has crown-6 moieties at the 1- and 3-positions and hydroxyethyl functions at the 2- and 4-positions, was prepared for the syntheses of polyester 3 and polyurethane 4 by reactions with adipoyl chloride and hexamethylene diisocyanate, respectively. The ion binding characteristics of monomer 2 and polymers 3 and 4 toward alkali and alkali earth metal ions were measured by liquid-liquid extraction from the aqueous phase into the organic phase. We observed that the polyurethane 4 has a higher binding affinity toward various metal cations when compared to polyester 3, which exhibits cesium ion selectivity.

고체상 추출법을 이용한 Phthalate Esters의 분석방법 연구 (A Study on Analytical Method of Phthalate Esters in Water by SPE(Solid-Phase-Extraction))

  • 홍성희;한개희;이찬형;이순화
    • 한국환경과학회지
    • /
    • 제12권1호
    • /
    • pp.81-86
    • /
    • 2003
  • The study was carried out to evaluate the new analytical method of phthalate esters(diethylphthalate, di-n-butylphthalate, butylbenzylphthalate, bis(2-ethylhexyl)phthalate), one of the endocrine disruptors, which were performed by GC/MS-SIM(selected ion monitoring). The phthalate esters were extracted from water samples using solid-phase extraction on $C_{18}$ columns. It investigated that the extraction recovery rate of phthalate esters with different solvents and solvent volume. The optimal solvent was dichloromethane and proper volume of dichloromethane for recovery of phthalate esters was 4 mL. There were good linearities(above $R^2$=0.9975) in the range 0.01~0.50mg/L, and the detection limits were below 0.01~0.03$\mu\textrm{g}$/L. The recovery rates, RSD and MDLs for phthalate esters were 80~114%, 5.0~8.1% and 0.03~0.11$\mu\textrm{g}$/L, respectively. This method shows a good precision of phthalate esters.

Solvent Extraction of Zinc from Strong Hydrochloric Acid Solution with Alamine336

  • Lee, Man-Seung;Nam, Sang-Ho
    • Bulletin of the Korean Chemical Society
    • /
    • 제30권7호
    • /
    • pp.1526-1530
    • /
    • 2009
  • Solvent extraction reaction of Zn(II) by Alamine336 from strong HCl solution up to 10 M was identified by analyzing the data reported in the literature. The equilibrium constant of this reaction was estimated by considering the complex formation between zinc and chloride ion. The necessary thermodynamic parameters, such as equilibrium constant for the formation of complexes and the interaction parameters, were evaluated from the thermodynamic data reported in the literature. The following solvent extraction reaction and the equilibrium constant was obtained by considering the activity coefficients of solutes present in the aqueous phase with Bromley equation. $Zn^{2+}\;2Cl^{-}\;+\;R_3NHCl_{org}\;=\;ZnCl_3R_3NH_{org},\;K_{ex}\;=\;6.33\;{\times}\;10^2$ There was a good agreement between measured and calculated distribution coefficients of Zn(II).

各種 燐化合物溶媒 抽出系에 있어서 4f 및 5f 系列 元素의 抽出速度 및 分配率의 溫度依存性 (Extraction Rate and Temperature Dependency of Distribution Ratio of 4f and 5f Series Element in the Various Phosphorus Compounds)

  • 이진택
    • 대한화학회지
    • /
    • 제13권3호
    • /
    • pp.199-204
    • /
    • 1969
  • 4f 및 5f 系列 元素의 溶媒抽出에 있어서 分配速度를 測定해 본 結果 4f 系列의 前半部와 後半部 間에 明白한 差異를 볼 수 있었다. 三價의 Am 및 Cm은 4f 系列의 前半部와 類似함을 알았다. 또한 分配率과 抽出溫度와의 關係를 檢討해 본 結果 抽出系에 따라 獨特한 增加 또는 減少傾向이 나타났으며 또한 Chelate 抽出系에 있어서는 原子番號 存在性이 있음을 알았다

  • PDF

금속이온 주입기에서의 Co 이온의 인출 특성 연구 (The Characteristic Study on the Extraction of a Co Ion in the Metal Ion Implanter)

  • 이화련;홍인석;티투안;조용섭
    • 한국진공학회지
    • /
    • 제18권3호
    • /
    • pp.236-243
    • /
    • 2009
  • 양성자기반공학기술개발사업단에서는 설치된 금속이온주입기를 이용하여 금속이온의 인출 시험 중에 있으며 120keV의 금속 이온주입이 가능하다. 현재 코발트 이온 주입의 타당성 확인을 위한 특성시험을 수행하고 있다. 이온원에 알루미나 도가니를 설치하여 분말 코발트 염화물을 고온($648^{\circ}C$) 가열에 의한 증기화로 인하여 플라즈마 방전이 되도록 하였다. 아크전압 120V, EHC 출력 250W에서 코발트 이온을 인출하기 위한 플라즈마를 발생하고 유지할 수 있었다. 코발트 이온 빔 전류는 플라즈마 내 아크전류에 의존하였으며 0.18A일 때 최대 빔전류 $100{\mu}A$를 얻을 수 있었다. 질량분리전자석에 의해서 $Co^+$$CoCl^+$, $Cl^+$ 이온의 첨두 빔 전류 비율을 확인하였고 전체 이온 대비 $Co^+$ 이온의 비율이 70% 수준을 유지함을 알 수 있었다. $Co^+$ 이온을 알루미늄 시료에 빔전류 $10{\mu}A$, 90분 동안 이온주입 하여 RBS(Rutherford Backscattering Spectrometry)분석법으로 $1.74{\times}10^{17}#/cm^2$의 이온량을 확인하였다.

추출조건에 따른 블루베리 열수추출물의 항산화 활성 비교 (Antioxidant activities of blueberry hot water extracts with different extraction condition)

  • 고경아;손모아;강혜림;임지희;임근형;김소미
    • 한국식품저장유통학회지
    • /
    • 제22권3호
    • /
    • pp.428-436
    • /
    • 2015
  • 본 연구에서는 추출방법을 달리하여 블루베리 열수추출물들간의 항산화 활성 차이를 비교하였다. Autoclave를 이용한 가압가열추출(AE), 오븐을 이용한 추출(OE), 끓인 증류수에 혼합 후 sonication한 추출(HWSE), 끓인 증류수에 산을 첨가한 후 sonication한 추출(HWASE) 및 15분간 끓여 추출(BE) 등의 방법으로 추출물을 제조하고, 총 폴리페놀, 플라보노이드 및 안토시아닌 함량을 확인하고 ABTS, alkyl 및 DPPH radical 소거능 실험과 $Fe^{2+}$ ion chelating 활성을 확인하였다. 총 폴리페놀 및 플라보노이드 함량 모두 AE에서 각각 $3.47{\pm}0.16mg\;GAE/g$$1.59{\pm}0.19mg\;RE/g$으로 가장 높은 값을 나타냈다. 한편 이와는 반대로 총 안토시아닌 함량은 AE가 가장 낮은 함량을 나타냈으며, HWSE(5.29 mg/g) 에서 가장 높은 함량을 나타냈다. ABTS와 alkyl radical 소거능 측정 결과, AE가 가장 우수한 소거능을 나타냈으며, DPPH radical 소거능 실험에서는 AE와 더불어 안토시아닌 함량이 가장 높은 HWSE이 우수한 활성을 나타냈다. $Fe^{2+}$ ion chelating 활성 측정 실험에서는 모든 추출물이 유의적 차이 없이 높은 활성을 나타냈다. 또한 SOD activity 측정 실험에서 AE가 가장 우수한 활성을 나타냈으며, $H_2O_2$에 의해 유도된 세포독성 또한 AE가 가장 효과적으로 억제시켰다. 이상의 결과를 토대로 추출 조건에 따른 항산화 활성 차이를 수율 대비로 비교하였을 때, 가장 낮은 활성을 나타냈던 HWASE에 대비하여 AE는 ABTS radical scavenging activity 1.90배, alkyl radical scavenging activity 2.32배, DPPH radical scavenging activity 1.72배, SOD assay 1.65배, $H_2O_2$에 의해 유도된 세포독성에 대한 보호효능 1.84배의 우수한 항산화 활성을 나타냈다.

The Influence of Pressure and Time on the Preparation of Gumiganghwal-tang Decoctions

  • Kim, Jung-Hoon;Kim, Seong-Sil;Shin, Hyeun-Kyoo;Seo, Chang-Seob
    • 대한한의학회지
    • /
    • 제34권4호
    • /
    • pp.12-20
    • /
    • 2013
  • Objectives: This study compared Gumiganghwal-tang (GGT) decoctions produced using different pressure levels for various extraction times to determine the optimal extraction conditions through hydrogen ion concentration (pH), total soluble solids content (TSSC), extraction yield, and content of chemical compounds. Methods: Decoctions were prepared by the pressure levels of 0 or $1kgf/cm^2$ for 30-180 min. The pH and TSSC were measured, the extraction yield was calculated, and the amounts of the chemical compounds were determined using high performance liquid chromatography. Results: The higher pressure and longer extraction time decreased the pH value, while those conditions increased TSSC and extraction yield: the decoction produced in 180 min by pressurized method showed the minimum value of pH, but maximum values of TSSC and extraction yield. The chemical compounds showed higher amounts in decoctions produced by non-pressurized methods than pressurized methods and their amounts were decreased over the peak extraction time in both pressurized and non-pressurized methods. The results of regression analysis confirmed the correlative influences of the pressure and extraction time on pH, TSSC, and extraction yield. Conclusions: This study suggests that pressure and extraction time influence the compositional constituents in GGT decoctions, and the non-pressurized method for 120 min should be chosen as the optimal extraction condition for the preparation of GGT decoction.

A Multi-megawatt Long Pulse Ion Source of Neutral Beam Injector for the KSTAR

  • Chang, Doo-Hee;Seo, Chang-Seog;Jeong, Seung-Ho;Oh, Byung-Hoon;Lee, Kwang-Won;Kim, Jin-Choon
    • 한국원자력학회:학술대회논문집
    • /
    • 한국원자력학회 2004년도 추계학술발표회 발표논문집
    • /
    • pp.719-720
    • /
    • 2004
  • A multi-megawatt long pulse ion source (LPIS) of neutral beam injector was developed for the KSTAR. Beam extraction experiments of the LPIS were carried out at the neutral beam test stand (NBTS). Design requirements for the ion source were 120 kV/65 A deuterium beam and a 300 s pulse length. A maximum ion density of $9.1310^{11}$ $cm^{-3}$ was measured by using electric probes, and an optimum arc efficiency of 0.46 A/kW was estimated with ion saturation current of the probes, arc power, and total beam area. An arcing problem, caused by the structural defect of decelerating grid supporter, in the third gap was solved by the blocking of backstream ion particles, originated from the plasma in the neutralizer duct, through the unnecessary spaces on the side of grid supporter. A maximum drain power of 1.5 MW (i.e. 70 kV/21 A) with hydrogen was measured for a pulse duration of 0.5 s. Optimum beam perveance was ranged from 0.75 to 0.85. An improved design of accelerator for the effective control of beam particle trajectory should provide higher beam perveance.

  • PDF