• Journal of Pharmaceutical Investigation
• /
• 제41권2호
• /
• pp.67-73
• /
• 2011

Ion exchange resins can be one of the good carriers for sustained drug release. However, the sustained release may not be enough only with themselves and hence film coating with rate controlling polymers can be applied to have a further effect on the drug release. Due to the environmental and economic issues of organic solvent for the polymer coating, aqueous polymeric systems were selected to develop dosage forms. Among the many aqueous polymeric dispersions for the film coating, EC (ethylcellulose) based polymers such as Aquacoat$^{(R)}$ ECD and Surelease$^{(R)}$ were evaluated.A fluid-bed coating was applied as a processing method. The drug release rate was quite dependent on the coating level so the release rate could be modified easily by changing different levels of the coating. The drug release rate in the Aquacoat$^{(R)}$ coated resin particles was strongly dependent on curing, which is a thermal treatment to make homogeneous films and circumvent drug release changes during storage. After dissolution test using the compressed tablets in which the coated resin particles are contained, inhomogeneous coating and even pores could be observed showing that the mechanical properties of EC were not resistant to granulation and compaction process. However, when tablets were prepared in different batches, the release profiles were almost identical showing the feasibility of the coated resin particle as incorporated into the tablet formulation.

• Journal of Electrochemical Science and Technology
• /
• 제11권1호
• /
• pp.92-98
• /
• 2020

SnO₂-based high-capacity anode materials are attractive candidate for the next-generation high-performance lithium-ion batteries since the theoretical capacity of SnO₂ can be ideally extended from 781 to 1494 mAh g^-1. Here 3D etched Cu foam is applied as a current collector for electron path and simultaneously a substrate for the SnO₂ coating, for developing an integrated electrode structure. We fabricate the 3D etched Cu foam through an auto-catalytic electroless plating method, and then coat the SnO₂ onto the self-supporting substrate through a simple sol-gel method. The catalytic dissolution of Cu metal makes secondary pores of both several micrometers and several tens of micrometers at the surface of Cu foam strut, besides main channel-like interconnected pores. Especially, the additional surface pores on etched Cu foam are intended for penetrating the individual strut of Cu foam, and thereby increasing the surface area for SnO₂ coating by using even the internal of Cu foam. The increased areal capacity with high structural integrity upon cycling is demonstrated in the SnO₂-coated 3D etched Cu foam. This study not only prepares the etched Cu foam using the spontaneous chemical reactions but also demonstrates the potential for electroless plating method about surface modification on various metal substrates.

• 자원리싸이클링
• /
• 제14권6호
• /
• pp.37-43
• /
• 2005

페리튬이온전지로부터 회수된 코발트와 리튬 침출액으로부터 화염분부열분해법에 의하여 $LiCoO_{2}$ 나노분말을 제조하였다. 리튬 및 코발트 성분을 함유하는 전극물질은 열처리 및 기계적 처리에 의해 그 농도를 증가 시켰다. 리튬이온전지 양극물질을 질산으로 용해한 다음 침출액중 Li과 Co의 당량비가 1.0 되도록 $LiNO_{3}$로 조절하여 화염분무열분해용 전구체를 제조하었다. 화염분무열분해법에 의해 제조된 $LiCoO_{2}$ 분말의 평균입자크기는 전구체의 몰 농도가 증가하면서 증가되었으며, 화염온도 역시 입자의 크기를 증가시켰다. 변수실험 결과 $11{\~}35nm$ 크기의 결정형 $LiCoO_{2}$ 나노분말을 제조할 수 있었다 또한 나노 $LiCoO_{2}$의 전극재료로서의 가능성을 확인하기 위하여 충방전 특성 평가와 같은 전기화학적 분석을 수행하였다.

• 분석과학
• /
• 제21권2호
• /
• pp.143-147
• /
• 2008

사용후핵연료를 지하 심부에 처분하였을 경우 예상되는 원자가가 4가인 우라늄(U(IV)) 이온을 제조하여 6가 우라늄(U(VI)) 이온과 분리하였다. U(IV) 이온을 제조하기 위하여 우라닐 용액에 몇 가지 환원제를 첨가하거나 환원제가 들어있는 혼합산으로 우라늄 산화물을 용해하는 시험을 수행하였다. 제조한 용액중 우라늄의 원자가는 Dowex AG 50W-X8 양이온교환수지에 의한 두 이온의 분리 및 레이저 유도 형광 분광광도계로 용액을 측정하여 확인하였다. 그러나 Lichroprep Si60 교환수지를 사용하였을 경우 Pu(IV)와 Pu(VI)의 분리조건으로 U(IV)와 U(VI)가 분리되지 않았다.

• 한국분말재료학회지
• /
• 제30권5호
• /
• pp.431-435
• /
• 2023

An irradiation hardening of Inconel 718 produced by selective laser melting (SLM) was studied based on the microstructural observation and mechanical behavior. Ion irradiation for emulating neutron irradiation has been proposed owing to advantages such as low radiation emission and short experimental periods. To prevent softening caused by the dissolution of γ' and γ" precipitates due to irradiation, only solution annealing (SA) was performed. SLM SA Inconel 718 specimen was ion irradiated to demonstrate the difference in microstructure and mechanical properties between the irradiated and non-irradiated specimens. After exposing specimens to Fe³⁺ ions irradiation up to 100 dpa (displacement per atom) at an ambient temperature, the hardness of irradiated specimens was measured by nano-indentation as a function of depth. The depth distribution profile of Fe³⁺ and dpa were calculated by the Monte Carlo SRIM (Stopping and Range of Ions in Matter)-2013 code under the assumption of the displacement threshold energy of 40 eV. A transmission electron microscope was utilized to observe the formation of irradiation defects such as dislocation loops. This study reveals that the Frank partial dislocation loops induce irradiation hardening of SLM SA Inconel 718 specimens.

• Geomechanics and Engineering
• /
• 제15권6호
• /
• pp.1135-1141
• /
• 2018

Volume changes of soils induced by inorganic acids cause severe foundation and superstructure failures in industrial buildings. This study aimed to assess the potential of fly ash to control volume changes in soils under acidic environment. Two soils such as black cotton soil predominant with montmorillonite and kaolin clay predominant with kaolinite were used for the present investigation. Both soils exhibited an increase in swelling subjected to phosphoric acid contamination. Ion exchange reactions and mineralogical transformations lead to an increase in swelling and a decrease in compressibility in black cotton soil, whereas phosphate adsorption and mineral dissolution lead to an increase in swelling and compressibility in case of kaolin clay. Different percentages of Class F fly ash obtained from Ramagundam national thermal power station were used for soil treatment. Fly ash treatment leads to significant reduction in swelling and compressibility, which is attributed to the formation of aluminum phosphate cements in the presence of phosphoric acid.

• Journal of Advanced Marine Engineering and Technology
• /
• 제9권2호
• /
• pp.153-158
• /
• 1985

The dependence of the corrosion potential on the stress corrosion cracking of 304 austenitic stainless steel was inspected by using the specimen of constant displacement type under the environment of 42% $MgCl_2$ boiled solution. The relationship of the corrosion potential to the intermittent propagation behaviour in stress corrosion cracking was cleared. As the results, a possible model of stress corrosion cracking of 304 austenitic stainless steel in $MgCl_2$ boiled solution was presented on the basis of the Film Rupture Model. This model is specified by the following process. Rupturing of passive film at notch tip .rarw. Dissolution of metal ion and formation of tunnel .rarw. Initiation of microcrack .rarw. Propagation of main crack .rarw. Recreation of passive film at new crack surface.

• 대한화학회지
• /
• 제7권2호
• /
• pp.186-188
• /
• 1963

An attempt to improve the method of volumetric determination of tungsten developed by Luke has been made successfully. Using amalgam coated lead instead of pure metallic lead in the reduction procedure. W(VI)-W(III) reduction has been found to be quantitative in rather concentrated hydrochloric acid. Since there was no excessive dissolution of lead via reduction of hydrogen ion, lead surface was totally accessible for the reduction of tungsten and no trouble was caused by dereposition of $PbCl_2$ crystals at the nozzle of Jones reductor. Furthermore, it has been confirmed that almost 100 mg. of $WO_3$ can be handled easily if the chloride concentration of the HCl is increased by adding solid $NH_4Cl$.

• Archives of Pharmacal Research
• /
• 제4권2호
• /
• pp.85-90
• /
• 1981

A quantitative GC-MS spectrometric assay was used for the determination of residual N, N-dimethylaniline as a contaminant in commercial penicillin derivatives from various sources. The assay utilizes selective ion focusing to monitor in a GC effluent the molecular ions of DMA generated by electron impact ionization. This method includes dissolution of the sample in alkaline solution, extraction of organic base with cyclohexane and injection into GC-MS with a 3% OV-17 column. Levels of 50 ppb of DMA were easily measured with a coeffecient of varation less than 5 % and recoveries from spiked samples exceeded 97 %. The results of the determinations of DMA in various commercial penicillins were relatively free of this contaminant.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.678-679
• /
• 2006

The effects of particle size on the surface properties of hydro-thermally synthesized barium titanate powders were investigated by means of particle size analysis, specific surface area, SEM, zeta potential and XPS. Particle sizes were measured by laser light scattering and are in the range of 150 to 1100nm. Zeta potential increased with increasing particle size and it was large minus value in the range of particle size from 500 to 900nm, which seems to be related with the dissolution of $Ba^{2+}$ ion in these particle sizes from the analysis of surface properties by XPS.