• 한국신뢰성학회지:신뢰성응용연구
• /
• 제12권3호
• /
• pp.153-163
• /
• 2012

Recently, as a electronic components are becoming more high-density, so that electronic circuits have smaller pitches between the leads and are more vulnerable to insulation failure. And the reliability of electric insulation has become an ever important issue as device contact pitches and print patterns shrink. Ion migration occurs in highly humid environment as voltage is applied to an installed print circuit. Under highly humid and voltage applied circumstances, electronic components respond to applied voltages by electrochemical ionization of metals, and a conducting filament forms between the anode and cathode across a nonmetallic medium. This leads to short-circuit failure of the electronic component. In thesis, we study acceleration test of ion migration in FR-4 PCB plated with Sn. Voltage applied test of FR-4 PCB circuits plated with Sn was tested in the temperature and humidity environments. As a result of this test, equation of acceleration model was derived.

• 전기화학회지
• /
• 제9권3호
• /
• pp.132-134
• /
• 2006

본 연구에서는 테트라싸이크린 항생제를 양이온선택성 전극의 담체로 사용한 막전극을 제작하고 알칼리 및 알칼리 토금속에 적용하여 전위차 감응도를 조사하였다. 제작된 전극은 지용성 첨가제의 유무와 관계없이 $Ca^{2+}$ 이온에 대해서 거의 이상적인 전위차 감응도를 나타내었다. 또한 $Mg^{2+}$를 제외한 다른 양이온에도 이상적인 네른스트값에 80% 이상의 감응도와 $10^{-5}$ 이하의 검출한계를 나타내었다. 수명, 감응시간, 재현성 등도 이온선택성 전극에 응용하기에 문제가 없었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.272-272
• /
• 2012

Additional neutral particle analyzer has been installed to investigate the variation of fast ion tails with regard to the line of sight during 2012 KSTAR campaign. The system has the same photo-diode particle detector as previous system [1]. Both newly installed system and previous system modifield for 2012 campaign have two channels. One has a particle stopper transparent to hard X-ray, the other has no one. It will be used to separate the hard X-ray component from total hard X-ray and fast neutral counts. It is expected to measure fast ion tails more clearly through this extended system. A detailed system and calibration result will be presented in the conference.

• Bulletin of the Korean Chemical Society
• /
• 제25권5호
• /
• pp.711-714
• /
• 2004

Peroxynitrite enters erythrocytes through band 3 anion exchanger and oxidizes cytosolic proteins therein. As a protein associated with band 3, carbonic anhydrase II may suffer from peroxynitrite-induced oxidative damages. Esterase activity of carbonic anhydrase II decreased as the concentration of peroxynitrite increased. Neither hydrogen peroxide nor hypochlorite affected the enzyme activity. Inactivation of the enzyme was in parallel with the release of zinc ion, which is a component of the enzyme's active site. SDS-PAGE of peroxynitrite-treated samples showed no indication of fragmentation but non-denaturing PAGE exhibited new bands with lower positive charges. Western analysis demonstrated that nitration of tyrosine residues increased with the peroxynitrite concentration but the sites of nitration could not be determined. Instead MALDI-TOF analysis identified tryptophan-245 as a site of nitration. Such modification of tryptophan residues is responsible for the decrease in tryptophan fluorescence. These results demonstrate that peroxynitrite nitrates tyrosine and tryptophan residues of carbonic anhydrase II without causing fragmentation or dimerization. The peroxynitrite-induced inactivation of the enzyme is primarily due to the release of zinc ion in the enzyme's active site.

• Journal of Photoscience
• /
• 제8권2호
• /
• pp.83-86
• /
• 2001

Structural analyses of oligosaccharide-malononitrile derivatives were conducted by matrix-assisted laser desorption/ionization post-source decay (MALDI-PSD) analysis in positive ion mode. The malononitrile derivatives of oligosaccharides, which were developed for highly sensitive detection of multi-component oligosaccharides by negative ion electrospray ionization mass spectrometry (ESI MS), were detected by positive-ion MALDI with the detection limit of 2 pmol level from the crude derivatization sample. The used matrix affected drastically the analytical results of oligosaccharide-malononitrile derivative by matrix-assisted laser desoprtion/ionization mass spectrometry (MALDI MS). The malononitrile derivatization of oligosaccharide also affect the patterns of MALDI-PSD spectra and give much more structural information than the free oligosaccharide.

• 멤브레인
• /
• 제7권3호
• /
• pp.123-130
• /
• 1997

휴대용 정보 통신기기의 소형 경량화에 적합한 고용량 전지인 리튬이온 이차전지에 응용되는 미세다공성 고분자 격리막에 관한 특성을 검토하였다. 격리막으로서 요구되어지는 항목은 전지 성능에도 관련되며, 안전에도 관련된 것들 이어서, 전지의 부재로서 상당히 중요한 부분을 차지하고 있다. 철재는 폴리에틸렌(PE) 등과 같은 폴리올레핀 소재를 연신하여 제조한 미세다공성 격리막이 주로 채용되고 있으며, 다양한 shut-down온도에 적용 가능하고, wettability가 향상된 미세다공성 격리막으로서, 불소계 고분자의 적용 및 폴리올레핀계 소재의 표면개질 등에 관한 연구가 지속되고 있다.

• Journal of Electrochemical Science and Technology
• /
• 제10권1호
• /
• pp.82-88
• /
• 2019

Here, we report on nanocrystalline Si-Al-M (M = Fe, Cu, Ni, Zr) alloys for use as an anode for lithium-ion batteries, which were fabricated via a melt-spinning method. Based on the XRD and TEM analyses, it was found that the Si-Al-M alloys consist of nanocrystalline Si grains surrounded by an amorphous matrix phase. Among the Si-Al-M alloys with different metal composition, Ni-incorporated Si-Al-M alloy electrode retained the high discharge capacity of 2492 mAh/g and exhibited improved cyclability. The superior $Li^+$ storage performance of Si-Al-M alloy with Ni component is mainly responsible for the incorporated Ni, which induces the formation of ductile and conductive inactive matrix with crystalline Al phase, in addition to the grain size reduction of active Si phase.

• 한국생산제조학회지
• /
• 제9권2호
• /
• pp.87-95
• /
• 2000

By using AIP(Arc Ion Plating) of a physical vapor deposition for the first time in Korea a ceramic tool whose surface is coated single layeredly with TiN is developed. In addition cutting resistance appearing in the process of finishing cut of hardened carbon tool steel STC3 is studied. The principal and radial components of cutting resistance in those cutting conditions appear to be the same or similar and the feed component is relatively small. The feed component is found to be in proportion to cutting width and the radial component in proportion to cutting thickness. Owing to coating the cutting resistance of a TiN coated ceramic tool increas-es compared with that of a general ceramic tool.

• 환경위생공학
• /
• 제8권2호
• /
• pp.155-168
• /
• 1993

The chemical components of rain water and aerosol in Bulkwang of Seoul and Yang-Paying of Kyunggi-do were compared in order to investigate that pollutants at urban area influences rain water and aerosol component. The following is the result of this study. 1) The pH of rain water was shown 4.82 at urban area and 5.69 at suburban area. 2) The mean concentration of $SO_4^{2-}$ within rain water at suburban was nearly the same at urban area but the mean concentration of $Na^{+},Ca^{2+},Mg^{2+}$ and $NH_4^{2+}$ at suburban area was higher than the corresponding levels at urban area. 3) The ion component of aerosol at suburban was shown 68% of that at urban area. This study proved that the concentration of rain water and aerosol component was under the influence of movement of air current.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.307-314
• /
• 1999

By using AIP(Arc Ion Plating) of a physical vapor deposition for the first time in Korea a ceramic tool whose surface is coated single layeredly with TiN is developed. In addition, cutting resistance appearing in the process of finishing cut of hardened carbon tool steel, STC3 is studied. The principal and radial components of cutting resistance in those cutting conditions appear to be the same or similar, and the feed component is relatively small. The feed component is found to be in proportion to cutting width, and the radial component in proportion to cutting thickness. Owing to coating the cutting resistance of a TiN coated ceramic tool increases compared with that of a general ceramic tool.