• 자원리싸이클링
• /
• 제12권3호
• /
• pp.13-24
• /
• 2003

폐호도껍질을 원료로 활성탄을 제조하는 과정에서 활성화 온도, 활성화 시간, 활성화제의 양, 그리고 활성화제의 종류 등을 변수로 하여 활성화 특성을 조사하였다. 인산을 활성화제로 사용하여 제조된 활성탄은 그 흡착능이 온도가 증가함에 따라 증가하여 약 $550^{\circ}C$부근에서 최대 흡착능을 보였으며 그 수율은 온도 상승에 따라 지속적으로 감소하였다. 활성화 시간은 약 2시간 정도에서 최적의 조건을 보였으며 시간이 증가함에 따라 활성탄의 수율은 계속 감소하였다. 활성화제의 농도 증가에 따라 수율은 지속적으로 상승하였으며 흡착능 또한 증대되다가 약 1.5M $H_3PO_4$ 이상의 조건에서는 오히려 흡착능이 감소하였다. SEM으로 관찰한 조건에 따른 활성탄의 미세구조의 변화는 조건별 흡착능의 변화와 잘 일치되었으며 활성화제의 종류는 활성화 과정에서 중요한 영향을 미치는 것으로 조사되었다. 제조된 활성탄의 흡착특성을 파악하기 위해 $Cu^{2+}$ 이온을 흡착질로 하여 흡착반응을 조사한 결과, 흡착반응은 전체적으로 2차식을 따르는 것으로 관찰되었으며 흡착질의 초기 농도가 감소함에 따라 반응상수는 점차 증가하였다. 평형흡착량은 Freundlich Model 을 잘 따르는 것으로 나타났으며 온도별 흡착반응을 검토한 결과, 중금속 이온의 흡착은 흡열반응의 특성을 나타내었다. 흡착에 따른 Activation Energy는 약 13.07kcal/mol로 산출되었으며 van't Hoff Equation을 이용하여 흡착반응의 열역학적 인자들을 계산하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 제17회 워크샵 및 추계학술대회
• /
• pp.634-637
• /
• 2005

Hydrogen adsorption mechanism onto the porous metal-organic frameworks (MOFs) has been studied by density functional theory calculation. The selected functionals for the predict ion of interact ion energies between hydrogen and potential adsorption sites of MOF was utilized after the evaluation with the various functionals for interaction energy of $H_2C_6H_6$ model system the adsorption energy of hydrogen molecule into MOF was investigated with the consideration of the favorable adsorption sites and the orientations. We also calculated the second favorable adsorption sites by geometry optimization using every combination of two first absorbed hydrogen molecules. Based on the calculation of first and second adsorption sites and energies, the hydrogen adsorption into MOF follows a cooperative mechanism in which the initial metal sites initiate the propagation of the hydrogen adsorption on the whole frameworks. In addition, it was found that the interaction strength between the simple benzene ring with hydrogen is significantly reinforced when the benzene ring has been incorporated into the framework of MOFs.

• 한국물환경학회지
• /
• 제22권3호
• /
• pp.498-503
• /
• 2006

Adsorption features of $Cd^{2+}$ on waste tire particles have been investigated for the purpose of enhanced wastes recycling along with the development of an economic process for wastewater treatment. The isoelectric point of waste tire particles was found to be ca. pH 7 and the adsorbed amount of $Cd^{2+}$ was increased with pH under experimental conditions. The variation of the adsorption behavior of $Cd^{2+}$ with pH was well explained by the change of the electrokinetic potential of waste tire particles according to the pH. Adsorption of $Cd^{2+}$ was observed to reach its equilibrium within 45 minutes after the adsorption started under experimental conditions and followed the Freundlich model well. Kinetic analysis showed that the adsorption reaction of $Cd^{2+}$ was second order and thermodynamic estimation substantiated the endothermic behavior of $Cd^{2+}$ adsorption. As the amount of adsorbent increased, more adsorption of $Cd^{2+}$ was accomplished and the adsorption capacity of adsorbent was found to be enhanced by its pre-treatment with NaOH. Also, the adsorption of adsorbate was promoted as the ionic strength of wastewater was increased.

• 공업화학
• /
• 제20권2호
• /
• pp.165-171
• /
• 2009

1%, 2%, 8% 및 16%의 가교도를 가진 스타이렌(제4류 위험물 중 제2석유류) 디비닐벤젠 공중합체에 1-aza-15-crown-5 거대고리 리간드를 치환반응으로 결합시켜 수지를 합성하였으며, 이들 수지의 특성을 염소 함량, 원소 분석, 열 중량 분석, 비표면적(BET), 그리고 적외선 분광법으로 확인하였다. 수지 흡착제에 대한 금속 이온의 흡착에 미치는 pH, 시간, 수지의 가교도 그리고 용매의 유전상수에 따른 영향들을 조사한 결과 금속 이온들은 pH 3 이상에서 큰 흡착율을 보였으며, 금속 이온들의 흡착 평형은 2 h 정도였다. 한편, 에탄올 용매에서 수지에 대한 흡착 선택성은 우라늄$(UO_2^{2+})$ > 납$(Pb^{2+})$ > 크롬$(Cr^{3+})$ 이온이었고, 금속 이온의 흡착력은 1%, 2%, 8% 및 16%의 가교도 순이며, 용매의 유전상수 크기에 반비례하였다.

• 공업화학
• /
• 제22권6호
• /
• pp.697-702
• /
• 2011

1%, 2%, 5% 및 15%의 가교도를 가진 클로로메틸화된 스타이렌-1, 4-디비닐벤젠에 $OenNdien-H_4$ 거대고리 리간드를 공중합반응으로 결합시켜 이온교환 수지를 합성하여 우라늄(${UO_2}^{2+}$), 칼륨($K^+$), 네오듐($Nd^{3+}$) 금속 이온들의 흡착 특성을 여러 가지 실험 조건하에서 조사하였다. 이들 합성수지의 확인은 염소 함량과 원소 분석 그리고 IR-스펙트럼으로 하였으며, 수지에 대한 금속 이온들의 흡착에 미치는 pH, 시간 그리고 수지의 가교도에 따른 영향들을 조사한 결과 우라늄 이온은 pH 3 이상에서 큰 흡착률을 보였으며, 금속 이온들의 흡착 평형은 2 h 정도였다. 한편, 메탄올용액에서 수지에 대한 흡착 선택성은 우라늄(${UO_2}^{2+}$) > 칼륨($K^+$) > 네오듐($Nd^{3+}$) 이온이었고, 금속 이온의 흡착력은 1%, 2%, 5% 및 15%의 가교도 순이었다.

• Journal of information and communication convergence engineering
• /
• 제4권4호
• /
• pp.158-161
• /
• 2006

[ $Bi_2Sr_2Ca_nCu_{n+1}O_y(n{\geq}0)$ ] thin film is fabricatedvia two different processes using an ion beam sputtering method i.e. co-deposition and layer-by-layer deposition. A single phase of Bi2212 can be fabricated via the co-deposition process. While it cannot be obtained by the layer-by-layer process. Ultra-low growth rate in our ion beam sputtering system brings out the difference in Bi element adsorption between the two processes and results in only 30% adsorption against total incident Bi amount by layer-by-layer deposition, in contrast to enough Bi adsorption by co-deposition.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.788-791
• /
• 2006

The ion adsorption on an aligning layer deposited onto a conductive electrode in a liquid crystal (LC) cell has been shown to depend strongly on the dielectric constants of the layer and its thickness d. Calculations made in the framework of the three-layer electrostatic theory showed that, depending on those and other intrinsic parameter of the problems, it is possible to observe either ion attraction or repulsion at the aligning surface. Tentative measurements of the ion adsorption dynamics on the aligning layers with various d qualitatively agree with the theory. The results obtained allow the memory effect in LCs and the sticking effect in LC displays (LCDs) to be controlled effectively.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 추계 학술논문 발표대회
• /
• pp.253-254
• /
• 2011

The purpose of this study is to investigate chloride ion adsoption property of cement mortar using nitrite type hydrocalumite(calumite) with self-corrosion inhibition function. Superior corrosion inhibition function of the VA/E/MMA-modified mortars with calumite was ascertained from accelerated corrosion test in the previous study. In this study, VA/E/MMA-modified mortars with calumite were prepared with calumite contents of 0, 5, 10% and polymer-binder ratio of 0, 10%, and tested for chloride ion adsorption to make it clear how calumite gives self-corrosion inhibition function to cement mortar. As a result, chloride ion adsorption property of VA/E/MMA-modified mortars with calumite was improved by increasing calumite contents compared to unmodified mortar regardless of using VA/E/MMA terpolymer powder or not.

• 한국환경과학회지
• /
• 제5권2호
• /
• pp.195-201
• /
• 1996

This study was conducted for the efficient utilization of a scoria, which is abundantly found in Cheju island, as adsorbent and the scoria was examined for its performance in clarification of adsorption of heavy metal ions. The order in heavy metal ions adsorbed on scoria was; Pb+>Cd^{2+}$>Cu^{2+}$>Ag^+$>Co^{2+}$>Zn^{2+}$>Cr^{3+}$>Cr^{6+}$. This tendency was relatively consistent with the decreasing order of radius of hydrated metal ion. Also, the smaller scoria size and the larger amounts of scoria showed higher removal efficiency for heavy metal ions. The same scoria size showed more effective removal efficiency for heavy metal ions at lower initial concentration than at higher initial concentration. The adsorption abilities of original scoria and chemically treated scoria were compared. Adsorption isotherm of scoria was generally obeyed to Freundlich formula than langmuir formula and Freundlich constant, than was obtained in the range of 0.2~0.4.

• Korean Journal of Chemical Engineering
• /
• 제35권11호
• /
• pp.2198-2206
• /
• 2018

We addressed the development of a novel, low-cost, and high-efficient material from hybrid materials, known as microcapsules. Microcapsules are a composite adsorbent made of a mixture of tannin, sericite and chitosan. The FT-IR analysis showed that the microcapsules contain hydroxyl, carboxyl, carbonyl, and amino groups, which play an important role in the adsorption of heavy metals. The microcapsules were able to remove 99% of Pb(II) in 30 min, and obtained a removal efficiency of more than (13-50)%, compared with the single adsorbents of tannin, chitosan, and sericite. In adsorption kinetic analysis, pseudo-second-order adsorption was more suitable than pseudo-first-order adsorption, and chemical adsorption did not limit the adsorption rate of Pb(II) ion. In isothermal adsorption, Langmuir adsorption was more suitable than Freundlich adsorption, and the maximum Langmuir adsorption capacity was 167.82 (mg/g). Furthermore, desorption and reusability studies, as well as the applicability of the material for wastewater treatment, demonstrated that microcapsules offer a promising hybrid material for the efficient removal of significant water pollutants, i.e., Pb(II) from aqueous solutions.