• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.11
• /
• pp.965-974
• /
• 2009

This study evaluated the degradation efficiency of malodorous sulfurized-organic compounds by utilizing N- and Sdoped titanium dioxide under visible-light irradiation, and examined the catalyst deactivation and regeneration. Catalyst surface was characterized by employing Fourier-Transform-Infrared-Red (FTIR) spectra. The visible-light-driven photocatalysis techniques were able to efficiently degrade low-level dimethyl sulfide (DMS) and dimethyl disulfide (DMDS) with degradation efficiencies exceeding 97%, whereas they were not effective regarding the removal of high-level DMS and DMDS, with degradation efficiencies of 84 and 23% within 5 hrs of photocatalytic processes. As compared with DMS, DMDS which containes one more sulfur element revealed quick catalyst deactivation. Catalyst deactivation was confirmed by the equality between input and output concentrations of DMD or DMDS, the obsevation of no $CO_2$ generation during a photocatalytic process, and the FTIR spectrum peaks related with sulfur ion compounds, which are major byproducts formed on catalyst surfaces. The mineralization efficiency of DMS at 8 ppm, which was a peak value during a photocatalytic process, was calculated as 144%, exceeding 100%. The catalyst regenerated by high-temperature calcination exhibited higher catalyst recovery efficiency (53 and 58% for DMDS and DMS, respectively) as compared with dry-air and humid-air regeneration processes. However, even the calcined method was unable to totally regenerate deactivated catalysts.

• Polymer(Korea)
• /
• v.34 no.1
• /
• pp.20-24
• /
• 2010

In this study, ETFE-g-PSSA membranes with various degrees of grafting (DOG) and thicknesses were prepared by a simultaneous irradiation method. SEM-EDX instrument was applied to measure the relative distribution of sulfur which is corresponding to that of a grafted polymer over the Cross-section of the ETFE-g-PSSA membranes prepared at various irradiation conditions. The results indicate that to obtain the evenly-grafted membranes, a styrene/dichloromethane ratio is needed to be under 60 (v/v%), and a higher DOG is required as the film thickness increases. The effects of DOG and thickness on the ion exchanging capacity (IEC) and water uptake (WU) were investigated by measuring the IEC and WU values of the membranes with various DOG and thicknesses.

• Applied Chemistry for Engineering
• /
• v.26 no.6
• /
• pp.714-718
• /
• 2015

Both lead molybdate ($PbMoO_4$) and chromium substituted lead molybdate ($PbMo_{1-x}Cr_xO_4$) were successfully synthesized using a conventional hydrothermal method and characterized by XRD, DRS, Raman, SEM and PL. We also investigated the photocatalytic activity of these materials for the decomposition of rhodamine B under UV-visible irradiation. The XRD and Raman results revealed the successful synthesis of well-crystallized $PbMoO_4$ crystals with the diameter of 51-59 nm, regardless of the addition of chromium ion. The DRS spectra of $PbMo_{1-x}Cr_xO_4$ catalysts showed new intensive absorption bands in the visible region. The $PbMoO_4$ catalysts showed the lowest photocatalytic activity and the activity increased with an increase of chromium substitution amounts under visible irradiation. PL peaks appeared at about 540-580 nm for all catalysts and excitonic PL signals were proportional to the photocatalytic activity for the decomposition of rhodamine B.

• Journal of the Korean Society of Radiology
• /
• v.12 no.2
• /
• pp.179-184
• /
• 2018

In this study, we compared the measured values of the effective beam size of standard gamma irradiator with the simulation results to provide a useful means to the effective beam area determination. Results of the simulation and measured using ion chamber was distributed in a relative error of 4.5 ~ 7.3% of the case of air kerma rate. The size of the effective beam area is when the simulation was implemented in the horizontal direction 27cm, 21.6cm vertical direction, the measured result using a film was obtained similar results with the horizontal direction 26.5cm, 21.9cm vertical direction. The relative error in the horizontal direction is 1.85% and 1.38% vertical effective beam area was also similarly distributed around the field gamma rays. As a result of the study, it was confirmed that the effectiveness of the simulation was sufficient for the gamma irradiation system. In particular, it is small relative errors in the effective beam size than the air kerma rate is considered to be due to the size of the beam is determined by geometric factors rather than the capacity of the standard source. A further study is needed to improve the reliability of the photon energy distribution diagram using simulation.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.4
• /
• pp.378-383
• /
• 1989

For selection of mutants two rice varieties, Sangpungbyeo and Seomjinbyeo, were irradiated with 20 kR and 25 kR of gamma rays. One panicle per each plant was harvested in Ml, and single needling per hill was planted for M2 and M3 generations. Mutations for short culm, earliness and the major traits were examined. 1. The mutation rates were varied with the rice varieties and the doses of radiation, higher in Sangpungbyeo and 25kR than in Seomjinbyeo and 20 kR, respectively. 2. The rates in Sangpungbyeo with the 20 kR and 25 kR were 1.10％ and 1.47％. respectively and those of Seomjinbyeo were 0.51％ and 1.25％, respectively. 3. The culm lengths of short-culm mutants derived from Sangpungbyeo and Seomjinbyeo were reduced about 10％ compared to their mother varieties, especially it was possible to select the dwarf mutants reducing 57％ and 40％ of culm length in Sangpungbyeo and Seomjinbyeo, respectively with the dose of 25 kR irradiation. 4. The range of heading date of the mutant ion in the M3 generation was comparatively wide. Many earliness mutants shortened about 7 days were selected as compared with their mother varieties, some mutants of the irradiated group had early matured by 20 days and 30 days, respectively in both Seomjinbyeo and Sangpungbyeo.

• The Journal of Korean Society for Radiation Therapy
• /
• v.12 no.1
• /
• pp.112-116
• /
• 2000

Purpose : The vertex scalp is always tangentially irradiated during total skin electron beam(TSEB) This study was discuss to the dose distribution at the vertex scalp and to evaluate the use of an electron reflector. positioned above the head as a means of improving the dose uniformity. Methods and Materials Vetex dosimetry was performed using ion-chamber and TLD. Measurements were 6 MeV electron beam obtained by placing an acrylic beam speller in the beam line. Studies were performed to investigate the effect of electron scattering on vertex dose when a lead reflector $40{\times}40cm$ in area, was positioned above the phantom. Results : The surface dose at the vertex, in the without of the reflector was found to be less than $37.8\%$ of the skin dose. Use of the lead reflector increased this value to $62.2\%$ for the 6 MeV beam. Conclusion : The vertex may be significantly under-dosed using standard techniques for total skin electron beam. Use of an electron reflector improves the dose uniformity at the vertex and may reduce or eliminate the need for supplemental irradiation.

• Journal of the Korean Vacuum Society
• /
• v.2 no.2
• /
• pp.209-219
• /
• 1993

Evaporated Al/Pd thin films were irradiated with various doses to produce intermetallic compounds. In order to study the first phase formation and phase sequence, RBS and TEM studies have been used. It was found that the initial phase formed by irradiation of $5{\times}10^{15}Ar^+/cm^2$ was $Al_3Pd_2$, while $1.5{\times}10^{16}Ar^+/cm^2$ gave the subsequent phase of AlPd. This phenomenon was analysed using effective heat of formation (${\Delta}$H') model. The experimental results agree with that predicted by effective heat of formation model. This model has been extended to predict the first phase formation and phase sequence by ion beam mixing in metal/Si systems as well as metal-metal systems.

• Korean Journal of Plant Tissue Culture
• /
• v.26 no.3
• /
• pp.197-203
• /
• 1999

The albino plants of tobacco (Nicotiana tobacum L. cv. BY-4) were isolated from seed populations that were induced by heavy-ion ($^{14}N$) beam irradiation to proembryo and the in vitro growth and differentiation have been characterized. The in vitro cultured albino plants showed significant reduction of chlorophyll content and possessed larger number of stomata on both upper and lower epidermis than that of wild-type plants. Stem growth of the mutants remained dwarfed, however, the internode recovered its normal length after GA$_3$ treatment (10.0mg/L) on the MS medium containing sucrose under continuous light. When explants of leaf blades of albino plants were cultured, multiple shoots formed directly on MS medium containing 1.0mg/L of BAP or kinetin and a large number of calli were induced on the MS medium containing 1.0mg/L NAA or 1.0 mg/L 2,4-D. The albino calli regenerated multiple albino plantlets in the MS medium containing 0.1mg/L NAA + 1.0 mg/L BAP. No significant differences between the wild-type and albino plants were detected in the multiple shoot induction, callus formation from the explants and the plantlets regeneration from calli. In addition, albino plants have a similar organogenesis Pattern to that of the wild-type in the media with different combinations of NAA (0 to 5.0mg/L) and BAP (0 to 5.0mg/L) treatment. These results indicate that the albino mutant has the same normal regeneration ability as that of wild-type, although the mutant has lost functions in photosynthesis, such as pigmentation.

• Journal of Ginseng Research
• /
• v.20 no.4
• /
• pp.501-519
• /
• 1996

There are two kinds of commercially available ginseng root, red ginseng and white ginseng processed from fresh ginseng root Those ginsengs are primary product from fresh ginseng root and have the characteristic of keeping their original root shape Processed ginseng products are made from either red ginseng or white ginseng by way of complicated process of pulverization. Extraction. Condensation, fettering, sterilization, etc. Among them there are extracts. extract powder, powder, capsules tablets, Candy, drinks, nectar, jelly, gums. chicken soup. tonic. etc. to meet the demand for consumer's pretheronce . The 200 kinds of processed secondary products are approximately produced in the form of 20 kinds of ginseng products by about 60 domestic companies. In spite of about 213.000 million won of domestic market in 1993. it seems like that the ginseng market of the future has not a good prospects The total market sale of white ginseng in Korea has been continuously decreased since 1991 And 963 tons of white ginseng was consumed in domestic market in 1993 The domestic market sales of white ginseng in origina1 root shave. was 90, 000 million won in 1993 and market price of the fine root used as a source of processed products has not been changed in these ten years. The total market sale of red ginseng and its processed products was 58, 000 million won in 1993 9.800 mi11ion won of red ginseng in original root shape and 48.000mi11ion of processed red ginseng product. Ginseng products such as extracts, drinks, teas and tonics etc atre mostly exported to south-east Asia. And the total exports of ginseng pi.oducts (extracts, drinks teas) decreased to 54 million dollars in 1994, compared with 85 million dollars in 1992. Despite of extensive knowledge about ginseng little is still known about the development of new processed ginseng pl.oducts because of "Know-How". Some papars have presented the effects of extracting method(amounts of solvent. time. temperature, equipment. etc.) on the quality and yields of ginseng extr acts. Also. some researchers have carried out a few studies on the poriflcation of the extracts and the amounts of precipitation in the drink at variotas pH during the storage for preventinly drink from precipitation. A fell studies on the preservation of Korean ginseng powder. tea. Extract powder by irradiation and ozone treatment have been reported by some researcher for the improvement hygienic quality of ginseng products There are also some reports about the effects of ginseng components on the acid production by lactic acid bacteria or acetic acid bacteria. and alcohol production by yeast for the development of new ginseng products processed by fermentation. To make ginseng more able to contribute to the health of mankind in the future. consistent and considerable efforts should be focussed on improving the taste of ginseng and developing various new product as a health food or a function food.tion food.

• Membrane Journal
• /
• v.17 no.4
• /
• pp.338-344
• /
• 2007

Electro-electrodialysis of hydriodic acid with HI molality of ca. 9.5 $mol/kg-H_2O$ was examined in the presence of iodine using a commercial cation exchange membrane, CMB, as a separator. For the increase of the selectivity of proton permeation, the membrane was radiation-treated by accelerated electron radiation. The membrane properties (area resistance, ion exchange capacity, water content) of the radiation-treated membranes were measured. The area resistance in 2 $mol/dm^3$ KCl solution, ion exchange capacity and water content of the radiation-treated membranes at each dose rate dad almost the same value as that of the non-treated membrane (original of CMB membrane). Electro-electrodialysis of hydriodic acid with HI molality of ca. 9.5 $mol/kg-H_2O$ was examined at $75^{\circ}C$ with 9.6 $A/dm^2$. The radiation-treated cation exchange membrane by accelerated electron radiation had higher selectivity of the proton permeation by cross-linking structure of polymer than that of the non-treated membrane.