• 제목/요약/키워드: Ion Flux

검색결과 252건 처리시간 0.023초

400 MeV/nucleon 12C 이온의 MCNPX 와 핵자료를 이용한 차폐 벤치마킹 계산 (400 MeV/nucleon 12C Ions Shielding Benchmark Calculations using MCNPX with Different Nuclear Data Libraries)

  • 신윤성;김용민;김동현;정남석;이희석
    • 한국방사선학회논문지
    • /
    • 제9권5호
    • /
    • pp.295-300
    • /
    • 2015
  • 현재 우리나라는 포항방사광가속기와 국립암센터의 양성자 치료용 가속기와 경주 양성자 가속기가 운영되고 있고 중이온 가속기, 4세대 방사광가속기 등 대형가속기 시설이 건설 중에 있다. 이들 시설에서 고에너지로 가속된 입사입자는 표적물질과 상호작용 후 2차 중성자를 발생시키고, 이 중성자는 가속기 구조물 및 주변 콘크리트, 토양, 지하수 등을 방사화 시킨다. 따라서 이러한 가속기 시설의 안전적 측면을 고려할 때 방사화를 일으키는 중성자의 차폐가 중요하다. 본 연구는 차폐해석에 사용되는 몬테카를로 코드 중 MCNPX를 이용하여 $^{12}C$ beam빔과 표적물질(Cu)과의 상호작용 후 생성되는 중성자를 계산하고, 그 중성자의 철 차폐체와 콘크리트 차폐체의 두께별 투과 후 스펙트럼을 MCNPX의 JENDL/HE 07과 la150을 이용해 비교하여 계산하였다. 빔의 방향과 차폐체의 종류 및 두께에 따라 그 결과를 실험값과 비교하여 검증함으로써 핵자료의 특성을 확인하였으며 향후 대형가속기시설의 선량평가용 기반기술로 활용하고자 하였다.

Small scale magNetospheric and Ionospheric Plasma Experiments; SNIPE mission

  • Hwang, Junga;Lee, Jaejin;Shon, Jongdae;Park, Jaeheung;Kwak, Young-Sil;Nam, Uk-Won;Park, Won-Kee
    • 천문학회보
    • /
    • 제42권1호
    • /
    • pp.40.3-41
    • /
    • 2017
  • Korea Astronomy and Space Science Institute The observation of particles and waves using a single satellite inherently suffers from space-time ambiguity. Recently, such ambiguity has often been resolved by multi-satellite observations; however, the inter-satellite distances were generally larger than 100 km. Hence, the ambiguity could be resolved only for large-scale (> 100 km) structures while numerous microscale phenomena have been observed at low altitude satellite orbits. In order to resolve those spatial and temporal variations of the microscale plasma structures on the topside ionosphere, SNIPE mission consisted of four (TBD) nanosatellites (~10 kg) will be launched into a polar orbit at an altitude of 700 km (TBD). Two pairs of satellites will be deployed on orbit and the distances between each satellite will be from 10 to 100 km controlled by a formation flying algorithm. The SNIPE mission is equipped with scientific payloads which can measure the following geophysical parameters: density/temperature of cold ionospheric electrons, energetic (~100 keV) electron flux, and magnetic field vectors. All the payloads will have high temporal resolution (~ 16 Hz (TBD)). This mission is planned to launch in 2020. The SNIPE mission aims to elucidate microscale (100 m-10 km) structures in the topside ionosphere (below altitude of 1,000 km), especially the fine-scale morphology of high-energy electron precipitation, cold plasma density/temperature, field-aligned currents, and electromagnetic waves. Hence, the mission will observe microscale structures of the following phenomena in geospace: high-latitude irregularities, such as polar-cap patches; field-aligned currents in the auroral oval; electro-magnetic ion cyclotron (EMIC) waves; hundreds keV electrons' precipitations, such as electron microbursts; subauroral plasma density troughs; and low-latitude plasma irregularities, such as ionospheric blobs and bubbles. We have developed a 6U nanosatellite bus system as the basic platform for the SNIPE mission. Three basic plasma instruments shall be installed on all of each spacecraft, Particle Detector (PD), Langmuir Probe (LP), and Scientific MAGnetometer (SMAG). In addition we now discuss with NASA and JAXA to collaborate with the other payload opportunities into SNIPE mission.

  • PDF

스플린터 및 판상형 티탄산칼륨염 합성 및 브레이크 보강재로서의 평가 (Synthesis of splinter-type and plate-type potassium titanate as reinforcements in brake pad for automobile)

  • 김성훈;김종영;심우영;이정주;권성욱
    • 한국결정성장학회지
    • /
    • 제29권6호
    • /
    • pp.329-337
    • /
    • 2019
  • 스플린터(splinter) 및 판상(plate shape) 형상을 가지는 티탄산칼륨염(K2O·nTiO2, PT)을 합성하고 브레이크 마찰재의 보강재로 이용하여 마찰 특성을 평가하였다. 스플린터형 티탄산칼륨염을 합성하기 위하여 먼저 판상 형상을 가지는 사티탄산칼륨염(K2O·4TiO2, PT4)을 합성하고 칼륨 이온(K+)을 일부 산침출(acid leaching)하여 육티탄산칼륨염(K2O·6TiO2, PT6)으로 변환시킨 후, 800℃에서 열처리하여 스플린터 형상의 입자를 얻었다. 판상형 티탄산칼륨염을 합성하기 위해서 염화칼륨을 융제로 사용하고 마그네슘(Mg)을 일부 첨가하여 판상의 형상을 가지는 마그네슘티탄산칼륨염(K0.8Mg0.4Ti1.6O4, PMT)을 합성하였다. 얻어진 육티탄산칼륨염 및 마그네슘티탄산칼륨염 입자를 보강재로 이용하여 브레이크 패드 마찰재를 제작하고 1/ 5-스케일 다이나모미터(scale dynamometer)를 이용하여 마찰 마모 특성을 평가하였다. 평가 결과, 두 종류의 보강재가 유사한 마찰계수 및 Fade & recovery 특성을 보였으며 판상형 마그네슘티탄산칼륨염의 경우, 스플린터형 육티탄산칼륨염보다 우수한 내마모성을 보이는 것을 알 수 있었다.

Study on Concrete Activation Reduction in a PET Cyclotron Vault

  • Bakhtiari, Mahdi;Oranj, Leila Mokhtari;Jung, Nam-Suk;Lee, Arim;Lee, Hee-Seock
    • Journal of Radiation Protection and Research
    • /
    • 제45권3호
    • /
    • pp.130-141
    • /
    • 2020
  • Background: Concrete activation in cyclotron vaults is a major concern associated with their decommissioning because a considerable amount of activated concrete is generated by secondary neutrons during the operation of cyclotrons. Reducing the amount of activated concrete is important because of the high cost associated with radioactive waste management. This study aims to investigate the capability of the neutron absorbing materials to reduce concrete activation. Materials and Methods: The Particle and Heavy Ion Transport code System (PHITS) code was used to simulate a cyclotron target and room. The dimensions of the room were 457 cm (length), 470 cm (width), and 320 cm (height). Gd2O3, B4C, polyethylene (PE), and borated (5 wt% natB) PE with thicknesses of 5, 10, and 15 cm and their different combinations were selected as neutron absorbing materials. They were placed on the concrete walls to determine their effects on thermal neutrons. Thin B4C and Gd2O3 were placed between the concrete wall and additional PE shield separately to decrease the required thickness of the additional shield, and the thermal neutron flux at certain depths inside the concrete was calculated for each condition. Subsequently, the optimum combination was determined with respect to radioactive waste reduction, price, and availability, and the total reduced radioactive concrete waste was estimated. Results and Discussion: In the specific conditions considered in this study, the front wall with respect to the proton beam contained radioactive waste with a depth of up to 64 cm without any additional shield. A single layer of additional shield was inefficient because a thick shield was required. Two-layer combinations comprising 0.1- or 0.4-cm-thick B4C or Gd2O3 behind 10 cm-thick PE were studied to verify whether the appropriate thickness of the additional shield could be maintained. The number of transmitted thermal neutrons reduced to 30% in case of 0.1 cm-thick Gd2O3+10 cm-thick PE or 0.1 cm-thick B4C+10 cm-thick PE. Thus, the thickness of the radioactive waste in the front wall was reduced from 64 to 48 cm. Conclusion: Based on price and availability, the combination of the 10 cm-thick PE+0.1 cmthick B4C was reasonable and could effectively reduce the number of thermal neutrons. The amount of radioactive concrete waste was reduced by factor of two when considering whole concrete walls of the PET cyclotron vault.

2005년 우리나라 습성강하물의 특성과 분포 (A Characteristics and Distributions of Wet Deposition in Korea, 2005)

  • 한진석;이상덕;홍유덕;공부주;신선아;정일록
    • 한국대기환경학회지
    • /
    • 제22권4호
    • /
    • pp.459-467
    • /
    • 2006
  • This study was carried out to characteristics and distributions of acid deposition in Korea. Precipitation was collected by acid deposition monitoring networks and analyzed for pH, conductivity, and following major ionic components $SO_4^{2-}$, $CI^-$, $NO_3^-$, $NH_4^+$, $Na^+$, $K^+$, $Ca^{2+}$, $Mg{2+}$. During the investigation period, Volume weighted annual mean pH of precipitation in Korea is 4.8, showing slightly acidic level. The amount of rainfall in the range of pH 5.1$\sim$5.5 charged approximately 28% of annual precipitation,23.4% in pH 4.6$\sim$5.0, and contributed 16.2% under pH 4.5. Among seasons, alkaline precipitation has occurred more often in spring, meanwhile acidic precipitation in which pH is under 4.5 has frequently occurred in autumn. Volume weighted annual mean concentrations of $SO_4^{2-}$, $NO_3^-$, $CI^-$ are 2.558 mg/L, 1.590 mg/L, 1.286 mg/L respectively, and provided that $SO_4^{2-}$, is the major contributor, followed by $NO_3^-$, $CI^-$. In case of cation, annual mean concentration for $NH_4^+$, $Na^+$, $K^+$, $Ca^{2+}$, $Mg{2+}$, $H^+$ are 0.693 mg/L, 0.528 mg/L, 0.439 mg/L, 0.455 mg/L, 0.089 mg/L,0.015 mg/L, and $NH_4$ were decided as the main contributor, followed by $Na^+$, $K^+$, $Ca^{2+}$, $Mg{2+}$, $H^+$. Annual wet deposition rate for sulfate, nitrate and ammonia are $3.316gm^{-2}yr^{-1}$, $2.057gm^{-2}yr{-1}$, $0.894gm^{-2}yr{-1}$, respectively, and it was founded that the deposition flux in summer contributes about 38.42% to 67.62% to total deposition.

구분린 완전결정을 이용한 중성자 단색기의 원리

  • 최용남;김신애;이창희
    • 한국결정학회:학술대회논문집
    • /
    • 한국결정학회 2003년도 춘계학술연구발표회
    • /
    • pp.22-22
    • /
    • 2003
  • 원자로에서 핵분열에 의해 생성된 고에너지 중성자는 감속재를 통해 열평형에 의해 에너지가 낮춰져 통계적 분포, 즉 Maxwell-Boltzman 운동에 따른 에너지 스펙트림을 갖게 된다. 중성자 산란장치는 통상 단색빔을 이용하므로 단색기(monochiomator)를 통해 이 분포에서 특정 파장의 중성자빔을 인출, 즉 단색화한다. 이때 단색기는 각각의 중성자 산란장치에 사용할 수 있는 특정 파장의 중성자빔을 인출하면서도, 파장의 퍼짐을 적절하게 조절하여 높은 중성자속(neutron flux)을 가지며 분해능도 또한 좋아야 한다. 전통적으로 많이 사용하는 단색화 방법은 결정의 내부결함을 유도하여 만든 모자익(mosaic) 결정을 이용하는 것이다. 이 방법은 특정 파장을 얻으면서도 좋은 분해능과 높은 중성자속을 갖는 모자익 결정을 만들기가 어렵고, 한번 결정된 단색기의 특성을 바꿀 수 없는 단점이 있다. 1980년대부터 몇몇 그룹이 거의 완전하게 성장된 단결정 슬랩을 미세하게 구부려서 탄성변형을 주어 effective 모자익 구조를 발생시킨 '구부린 완전결정(bent perfect crystal, BPC)' 단색기를 개발하여 특정 목적에 활용하는 시도를 하였다. BPC 단색기는 단색화된 중성자빔을 집속(focusing)할 수 있으며, 결정의 구부림 정도를 조절하고 배치 기하를 바꿈으로써 다양한 특성을 갖는 단색빔을 얻을 수 있는 장점이 있다. 이렇게 단색기의 기하학적 변수를 조절함으로써 회절빔의 집속도와 분해능을 조절할 수 있어서 잔류응력 측정이나 단결정 회절 및 집합조직 측정장치 등에 적용할 수 있다. 본 연구에서는 BPC 단색기의 원리와 여러 배치기하에 따른 빔의 특성을 소개하고자 한다.빔이 시료와 상호 작용하는 면적과 상호작용하지 않을 때의 빔을 회절모드에서 faraday cup으로 측정한 빔전류로 부터 계산하였다. Gibbsite에 대한 전자빔 조사 시 1분 이내에 급격한 Hydroxyl Ion(OH-)의 이탈로 인해 Cibbsite의 구조는 거시적 비정질화가 되며 시간증가에 따라 χ-alumina → ν-alumina → σ-alumina or δ-alumina의 순으로 상전이를 겪는다. 전자빔 조사 시 관찰된 회절자료의 가시적 변화를 통해 illumination angle 1.25mrad(Dose rate : 334 × 10³ e/sup -//sec·n㎡)일 경우 약 3초 이내에 비정질화가 시작됨을 알 수 있었고 이는 약 1 × 10/sup 6/ e/sup -//sec·n㎡ 의 전자선량에 해당되며 이를 기준으로 각각의 illumination angle에 대한 임계전자선량을 평가할 수 있었다. 실질적으로 Cibbsite와 같은 무기수화물의 직접가열실험 시 전자빔 조사에 의해 야기되는 상전이 영향을 배제하고 실험을 수행하려면 illumination angle 0.2mrad (Dose rate : 8000 e/sup -//sec·n㎡)이하로 관찰하고 기록되어야 함을 본 자료로부터 알 수 있었다.운동횟수에 의한 영향으로써 운동시간을 1일 6시간으로 설정하여, 운동횟수를 결정하기 위하여 오전, 오후에 각 3시간씩 운동시키는 방법과 오전부터 6시간동안 운동시키는 두 방법을 이용하여 품질을 비교하였다. 각 조건에 따라 운동시킨 참돔의 수분함량을 나타낸 것으로, 2회(오전 3시간, 오후 3시간)에 나누어서 운동시키기 위한 육의 수분함량은 73.37±2.02%를 나타냈으며, 1회(6시간 운

  • PDF

$TiO_2$-Encapsulated EFAL-Removed Zeolite Y as a New Photocatalyst for Photodegradation of Azo Dyes in Aqueous Solution

  • 조원재;윤숙자;윤민중
    • Journal of Photoscience
    • /
    • 제12권1호
    • /
    • pp.17-23
    • /
    • 2005
  • Application of a new photocatalyst has been attempted to improve the efficiency and rates of photocatalytic degradation of azo dyes by using a model dye such as Methyl Orange. As a new photocatalyst, $TiO_2$ encapsulated EFAL-removed zeolite Y ($TiO_2$ /EFAL-removed zeolite Y) has been synthesized by ion-exchange in the mixture of EFAL-removed zeolite Y with 0.05 M aqueous [$(NH_4)_2 TiO(C_2O_4)_2.H_2O$] [$TiO(C_2O_4)_2.H_2O$]. This new photocatalyst has been characterized by measuring XRD, IR and reflectance absorption spectra as well as ICP analysis, and it was found that the framework structure of $TiO_2$ /EFAL-removed zeolite Y is not changed by removing the extra-framework aluminum (EFAL) from the normal zeolite Y and the $TiO_2$ inside the photocatalyst exists in the form of $(TiO^{2+})_n$ nanoclusters. Based on the ICP analysis, the Si/Al ratio of the $TiO_2$ /EFAL-removed zeolite Y and the weight of $TiO_2$ were determined to be 23 and 0.061g in 1.0g photocatalyst, respectively. It was also found that adsorption of the azo dye in the $TiO_2$ /EFAL-removed zeolite is very effective (about 80 % of the substrate used). This efficient adsorption contributes to the synergistic photocatalytic activities of the $TiO_2$ /EFAL-removed zeolite by minimizing the required flux diffusion of the substrate. Thus, the photocatalytic reduction of methyl orange (MO) was found to be 8 times more effective in the presence of $TiO_2$ /EFAL-removed zeolite Y than in the presence of $TiO_2$ /normal zeolite Y. Furthermore, the photocatalytic reduction of MO by using 1.0 g of the $TiO_2$ /EFAL-removed zeolite Y containing 0.061g of $TiO_2$ is much faster than that carried out by using 1.0 g of Degussa P-25.

  • PDF

하상 인공구조물에 의해 유도되는 지하수-하천수 시스템의 상호작용 (Interaction Between Groundwater and Stream Water Induced by the Artificial Weir on the Streambed)

  • 오준호;김태희;성현정;김용제;송무영
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제12권2호
    • /
    • pp.9-19
    • /
    • 2007
  • 본 연구는 하상인공구조물에 의해 유도되는 지하수-하천수 시스템의 상호작용을 지하수 순환을 중심으로 연구하였다. 연구지역은 충청남도 금산군 남이면 건천리의 남이휴양림으로 연구의 목적을 달성하기 위해 수리물리적 방법(수위관측)과 수리화학적 특성(pH, EC, 주 이온분석)을 분석하였으며, 이들 자료간의 연관성을 파악하기 위해서 상호상관분석을 실시하였다. 수리물리적 방법에 의한 연구결과 하상 보 수평부의 BH-14의 수위변동은 다른 지하수관정과 비교 할 때 이중퇴행양상이 빈번하게 나타났으며, 그 폭도 크게 나타났다. 또한, 수리화학적 방법에 의해 얻은 결과를 자연추적자의 개념으로 사용해 보면 지하수인 BH-14가 하천에 유사한 성향을 나타내었다. 상관성분석결과에서 수리물리적 측면인 수위에 대한 상관성분석에서 BH-14와 하상 보에서 가장 높게 나타났으며, 반면 수리화학적 측면에 대한 상관성분석에서는 하상 보와 다리의 상관성이 가장 높게 나타났다. 이는 수위와 같은 물리적 상호작용은 용질거동 없이 압력의 전파에 의해 일어나는데 반하여 수리화학적 상호작용은 용질의 거동에 의해 반응이 일어나기 때문에 더 많은 시간이 걸리기 때문인 것으로 판단된다. 결과적으로 하상의 불투수성의 보에 의해 하천과 주변대수층의 경계조건이 바뀌고, 이때 지하수 시스템으로 유입되는 하천수에 의해 BH-14의 수위가 즉각적으로 상승하며, 수질에서 하천수적 성향을 나타내는 것으로 판단된다. 이러한 현상은 보의 수위가 높아질수록 더욱 증가하는 경향을 나타낸다.

저가습 조건에서 냉각 유체의 고분자전해질 연료전지에 대한 영향 (Effect of Coolant on PEMFC Performance in Low Humidification Condition)

  • 이흥주;송현도;권준택;김준범
    • 전기화학회지
    • /
    • 제10권1호
    • /
    • pp.25-30
    • /
    • 2007
  • 고분자전해질 연료전지의 성능은 cell 온도, 전체 압력, 반응 기체의 부분 압력 상대습도와 같은 다양한 요인들에 의해 영향을 받는다. 이온화된 수소 이온은 $H_3O^+$의 형태로 membrane을 통과하여 물을 생성하는 반응으로 전기를 발생시킨다. 대용량 연료전지에서는 부수적으로 생성되는 열을 제거하거나 다른 용도로 사용할 목적으로 냉각시스템이 필요하다. 냉각수의 전도도가 상승할 경우에 연료전지에서 발생된 전류의 일부가 냉각수를 통하여 누설되어 연료전지의 성능을 감소시킬 수 있다. 본 연구에서는 3차 증류수와 ethylene glycol이 함유되어 있는 부동액을 사용하여 저항 수치 변화를 관찰하는 실험을 수행하였다. 3차 증류수의 경우 저항값이 설정치 이하로 내려가는데 약 28일이 소요되었고, 연료전지의 운전에 의한 영향은 관찰되지 않았다. 부동액을 냉각수로 사용한 경우는 43일이 지나도 저항값이 설정치 이하로 내려가지는 않았지만, stack 분리판의 접착부에 이상이 생긴 것으로 추정되는 연료전지의 성능 저하가 발생하여 전도도 실험을 중단하였다. 고분자전해질 연료전지에서는 수소이온의 이온전도성 저하를 방지하기 위하여 외부에서 가습하여 주는 방식이 일반적이지만, 소용량 연료전지에서는 무가습 조건을 적용하여 연료전지의 효율을 높이고 제작단가도 경감할 수 있다. 이를 위하여 저가습 및 무가습 실험을 수행하였으나 대용량 연료전지에서는 양측 무가습인 경우에 $50{\sim}60^{\circ}C$ 이상의 고온에서 성능이 발현되기 어려운 것으로 관찰되었다. 냉각수의 유량을 다르게 하여 실험을 수행한 경우에는 0.78L/min과 같은 낮은 유량에서 출구온도와 입구온도를 측정하여 본 결과 두 온도 사이에 ${\Delta}T$가 다른 유량에서보다 크게 발생하여 성능이 감소된 것으로 사료된다. 이와 같이 냉각수의 온도와 유량을 다르게 하여 양측 무가습 실험을 수행한 결과, 연료전지의 성능이 cell 온도에 직접적인 연관이 있는 것으로 관찰되었다.

폐쇄형 묘생산 시스템의 수분 수지 분석 (Analysis of Water Balance in Closed Transplants Production System)

  • 김진국;김용현;최유화;이명규
    • 생물환경조절학회지
    • /
    • 제12권3호
    • /
    • pp.152-159
    • /
    • 2003
  • 본 연구에서는 감자 플러그묘를 생산하고자 개발된 폐쇄형 시스템에서 식물묘 생산에 필요한 관수량, 식물묘와 배지로부터의 증발산량, 기습기에 의한 가습량, 공조기구에 의한 제습량, 환기에 의한 수분손실 등을 정량적으로 분석하고, 수분수지에 미치는 상대습도의 영향을 검토하였다. 기온, 상대습도, 광주기 및 PPF 를 각각 20$^{\circ}C$, 70%, 16/8 h, 200 ${\mu}$mol${\cdot}m^{-2}{\cdot}s^{-l}$로 조절한 조건에서 묘생산 시스템에서의 기습량, 제습량, 관수량 및 증발산량은 각각 167.9 kg${\cdot}m^{-2},\;196.9{\cdot}m^{-2},\;44.3\;kg{\cdot}m^{-2},\;33.5\;kg{\cdot}m^{-2}$로 나타났다. 식물체와 배지가 지닌 수분함량은 각각 $1.2\;kg{\cdot}m^{-2},\;6.9\;kg{\cdot}m^{-2}$ 로 나타났다. 3수준 (60%, 70%, 80%)의 상대습도 처리에 따른 묘생산 시스템내의 가습량, 제습량, 관수량, 증발 산량, 배지와 식물체의 수분함량은 상대습도가 증가할수록 모두 증가하였다. 그러므로 상대습도가 낮아질수록 시스템내의 물사용량은 줄어들었으나, 물이용가능효율은 증가하였다. 제습된 물을 재이용할 경우 시스템의 물이용가능효율은 상대습도 처리에 따라 0.97~1.0으로 나타났다. 따라서 제습된 물을 회수하여 재이용할 수 있는 폐쇄형 시스템의 개발은 식물묘생산에 요구되는 수분소모량을 절감시킬 뿐만 아니라 물소비 절약형 식물생산 방식의 확립에 크게 기여할 것이다.