• International Journal of Computer Science & Network Security
• /
• v.23 no.10
• /
• pp.169-178
• /
• 2023

Wireless sensor network is wieldy use for IoT application. The sensor node consider as physical device in IoT architecture. This all sensor node are operated with battery so the power consumption is very high during the data communication and low during the sensing the environment. Without proper planning of data communication the network might be dead very early so primary objective of the cluster based routing protocol is to enhance the battery life and run the application for longer time. In this paper we have comprehensive of twenty research paper related with clustering based routing protocol. We have taken basic information, network simulation parameters and performance parameters for the comparison. In particular, we have taken clustering manner, node deployment, scalability, data aggregation, power consumption and implementation cost many more points for the comparison of all 20 protocol. Along with basic information we also consider the network simulation parameters like number of nodes, simulation time, simulator name, initial energy and communication range as well energy consumption, throughput, network lifetime, packet delivery ration, jitter and fault tolerance parameters about the performance parameters. Finally we have summarize the technical aspect and few common parameter must be fulfill or consider for the design energy efficient cluster based routing protocol.

• KIPS Transactions on Computer and Communication Systems
• /
• v.8 no.9
• /
• pp.217-224
• /
• 2019

Recently, sensor networks are built and used on many kinds of fields such as home, traffic, medical treatment and power grid. Sensing data manipulation on these fields could be a serious threat on property and safety. Thus, a proper way to block sensing data manipulation is necessary. In this paper, we propose IoT(Internet of Things) sensing data validation mechanism based on data obfuscation and variance analysis to remove manipulated sensing data effectively. IoT sensor device modulates sensing data with obfuscation function and sends it to a user. The user demodulates received data to use it. Fake data which are not modulated with proper obfuscation function show different variance aspect with valid data. Our proposed mechanism thus can detect fake data by analyzing data variance. Finally, we measured data validation time for performance analysis. As a result, block rate for false data was improved by up to 1.45 times compared with the existing technique and false alarm rate was 0.1~2.0%. In addition, the validation time on the low-power, low-performance IoT sensor device was measured. Compared to the RSA encryption method, which increased to 2.5969 seconds according to the increase of the data amount, the proposed method showed high validation efficiency as 0.0003 seconds.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.11
• /
• pp.310-318
• /
• 2018

Recently, the importance of big data analysis is increasing as a large amount of data is generated by various devices connected to the Internet with the advent of Internet of Things (IoT). Especially, it is necessary to analyze various large-scale IoT streaming sensor data generated in real time and provide various services through new meaningful prediction. This paper proposes a real-time indoor PM10 concentration prediction LSTM model based on streaming data generated from IoT sensor using AWS. We also construct a real-time indoor PM10 concentration prediction service based on the proposed model. Data used in the paper is streaming data collected from the PM10 IoT sensor for 24 hours. This time series data is converted into sequence data consisting of 30 consecutive values from time series data for use as input data of LSTM. The LSTM model is learned through a sliding window process of moving to the immediately adjacent dataset. In order to improve the performance of the model, incremental learning method is applied to the streaming data collected every 24 hours. The linear regression and recurrent neural networks (RNN) models are compared to evaluate the performance of LSTM model. Experimental results show that the proposed LSTM prediction model has 700% improvement over linear regression and 140% improvement over RNN model for its performance level.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.5
• /
• pp.719-730
• /
• 2021

We have demonstrated a sandwich-type ZnO-based piezoelectric energy harvesting nanogenerator, namely ZCZ-NG device, composed of symmetrically stacked layers of ZnO/carbon tape/ZnO structure. Especially, we have adopted a conductive double-sided adhesive carbon tape in an effort to fabricate a high-quality ZCZ-NG device, leading to its superior output performance in terms of the peak-to-peak output voltage. Effects of the device size, ZnO layer thickness, and bending strain rate on the device performance have been investigated by measuring the output voltage. Moreover, to evaluate the effectiveness of the fabricated ZCZ-NG devices, we have experimentally implemented a sensor network testbed which can utilize the output voltages of ZCZ-NG devices. This sensor network testbed consists of several components such as Arduino-based transmitter and receiver nodes, wirelessly transmitting the sensed information of each node. We hope that this research combining the ZnO-based energy harvesting devices and IoT sensor networks will contribute to the development of more advanced energy harvester-driven IoT sensor networks in the future.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.1-7
• /
• 2018

The IoT environment provides an infinite variety of services using many different devices and networks. The development of the IoT environment is directly proportional to the level of security that can be provided. In some ways, lightweight cryptography is suitable for IoT environments, because it provides security, higher throughput, low power consumption and compactness. However, it has the limitation that it must form a new cryptosystem and be used within a limited resource range. Therefore, it is not the best solution for the IoT environment that requires diversification. Therefore, in order to overcome these disadvantages, this paper proposes a method suitable for the IoT environment, while using the existing block cipher algorithm, viz. the lightweight cipher algorithm, and keeping the existing system (viz. the sensing part and the server) almost unchanged. The proposed BCL architecture can perform encryption for various sensor devices in existing wire/wireless USNs (using) lightweight encryption. The proposed BCL architecture includes a pre/post-processing part in the existing block cipher algorithm, which allows various scattered devices to operate in a daisy chain network environment. This characteristic is optimal for the information security of distributed sensor systems and does not affect the neighboring network environment, even if hacking and cracking occur. Therefore, the BCL architecture proposed in the IoT environment can provide an optimal solution for the diversified IoT environment, because the existing block cryptographic algorithm, viz. the lightweight cryptographic algorithm, can be used.

• ETRI Journal
• /
• v.44 no.3
• /
• pp.389-399
• /
• 2022

Wireless sensor networks (WSNs) are one of the basic building blocks of Internet of Things (IoT) systems. However, the wireless sensing nodes in WSNs suffer from energy constraint issues because the replacement/recharging of the batteries of the nodes tends to be difficult. Furthermore, a number of realistic IoT scenarios, such as habitat and battlefield monitoring, contain mobile sensing elements, which makes the energy issues more critical. This research paper focuses on realistic WSN scenarios that involve mobile sensing elements with the aim of mitigating the attendant energy constraint issues using the concept of radio-frequency (RF) energy extraction. The proposed technique incorporates a cluster head election workflow for WSNs that includes mobile sensing elements capable of RF energy harvesting. The extensive simulation analysis demonstrated the higher efficacy of the proposed technique compared with the existing techniques in terms of residual energy, number of functional nodes, and network lifetime, with approximately 50% of the nodes found to be functional at the 4000th, 5000th, and 6000th rounds for the proposed technique with initial energies of 0.25, 0.5 and 1 J, respectively.

• Journal of Industrial Convergence
• /
• v.20 no.8
• /
• pp.61-67
• /
• 2022

The Internet of Things(IoT) is one of the key technologies in the Fourth Industrial Revolution. The IoT is a system that acquires information from various sensors and provides meaningful information to users. The method of obtaining information from sensor is using WIFI, Bluetooth and Server. is not accessible to external users because of different type of networks or local area communication. For this reason, there is a problem that external user cannot receive notification in regard to sensor information. In this paper, we want to establish a cloud message environment using Google's FCM(Firebase Cloud Messaging) and find out through experiments how users can receive notifications even if they are outside.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.3
• /
• pp.1393-1405
• /
• 2017

It is well known that duty-cycling control by dynamically adjusting the polling interval according to the traffic loads can effectively achieve power saving in wireless sensor networks. Thus, there has been a significant research effort in developing polling interval adaptation schemes. Especially, Dynamic Low Power Listening (DLPL) scheme is one of the most widely adopted open-looping polling interval adaptation techniques in wireless sensor networks. In DLPL scheme, if consecutive idle (busy) samplings reach a given fixed threshold, the polling interval is increased (decreased). However, due to the trial-and-error based approach, it may significantly deteriorate the system performance depending on given threshold parameters. In this paper, we propose a novel DLPL scheme, called SDL (Sequential hypothesis testing based Dynamic LPL), which employs sequential hypothesis testing to decide whether to change the polling interval conforming to various traffic conditions. Simulation results show that SDL achieves substantial power saving over state-of-the-art DLPL schemes.

• Journal of Korea Multimedia Society
• /
• v.24 no.1
• /
• pp.67-74
• /
• 2021

As IoT(Internet Of Things) devices like a smart sensor have constrained power sources, a power strategy is critical in WSN(Wireless Sensor Networks). Therefore, it is necessary to figure out the residual power of each sensor node for managing power strategies in WSN, which, however, requires additional data transmission, leading to more power consumption. In this paper, a residual power estimation method was proposed, which uses ignorantly small amount of power consumption in the resource-constrained wireless networks including WSN. A residual power prediction is possible with the least data transmission by using Machine Learning method with some training data in this proposal. The performance of the proposed scheme was evaluated by machine learning method, simulation, and analysis.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.11 no.3
• /
• pp.91-98
• /
• 2015

There is a new evolution in technological advancement taking place called the Internet of Things (IoT), The IoT enables physical world objects in our surrounding to be connected to the Internet. ISM (Industrial Scientific Medical) band that is 2.4GHz band authorized free of charge is being widely used for smart devices. Accordingly studies have been continuously conducted on the possibility of coexistence among nodes using ISM band. In particular, the interference of IEEE 802.11b based Wi-Fi devices using overlapping channel during communication among IEEE 802.15.4 based wireless sensor nodes suitable for low-power, low-speed communication using ISM band. Because serious network performance deterioration of wireless sensor networks. In this paper, we will propose an algorithm that identifies the possibility of using more accurate channels by mixing utilization of interference signal and RSSI (Received Signal Strength Indicator) Min/Max/Activity of Interference signal by wireless sensor nodes. In addition, it will verify our algorithm by using OPNET Network verification simulator.