• 한국산업융합학회 논문집
• /
• 제24권6_2호
• /
• pp.883-890
• /
• 2021

In this study, joint analysis was conducted on the rock slope by aerial surveying using UAV. Aerial photos were taken using UAV to measure the directionality of the rock slope exposed to the site, and the directionality of the joint was analyzed using the photographed photos. UAV photography was taken under conditions of 90% overlap and an altitude of 50m. The photographing path was measured in the horizontal, vertical, and oblique directions based on the slope, and the joint characteristics were analyzed. Aerial surveying research on the joint directionality analysis of rock slopes is still incomplete, and the method for accurate joint directionality analysis is not presented strategically, so it is difficult to apply it in design. Through the results of this study, we would like to propose an flight photographing technique for the investigation of rock joints. As a result of the study, in the case of the joint investigation of the rock slope using UAV, it was necessary to change conditions such as altitude, aerial photography route, and overlap according to the size of the joint according to the site conditions.

• 지질공학
• /
• 제13권3호
• /
• pp.359-368
• /
• 2003

현재 건설중에 있는 부산 신항만의 매립을 위해 채석장이 가동중에 있으나, 실제 공사 중 채석된 암석이 당초 설계와는 다른 암질을 포함하고 있다. 따라서, 당초 설계와는 달리 많은 폐석이 발생되어 정상적인 공사추진에 애로사항이 있으므로, 현장조사 및 실내작업을 통하여 지정된 채석장에 대한 전체적인 암질을 구분하는 것이 본 연구의 목적이다. 이를 위해 측량, Schimidt Rock Hammer 시험, 절리간격조사를 시행하였고 실내에서 DIPS 및 Rockworks 프로그램을 이용하여 절리의 방향성 및 발파 후 암괴의 크기를 분석하였다. 그 결과 본 지역에는 절리밀도가 높아 토석 채취시 ${\Phi}100mm$ 이하의 필터사석이 많이 발생하는 것으로 분석되었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.854-861
• /
• 2005

Studied accuracy and practical use possibility of joint measurement that using 3D laser scanner to rock slope. Measured joint of Rock slope and comparison applied 3 dimension laser scanner and clinometer. 3D laser scanning system preserves on computer calculating to 3 dimension coordinate scaning laser to object. and according to laser measurement method of interior, produce correct vector value from charge-coupled device(CCD) or laser reciver and telegram register and time measuring equipment. Create of object x, y, z point coordinates to 3 dimension space of computer. Such 3 dimension point datum (Point Clouds) forms relocate position informations that exist to practical space to computer space. Practical numerical values related between each other. Compared joint distribution and direction that measured by laser scanner and clinometer. By the result, Distribution of joint projected almost equally. Could get more joint datas by measurement of 3 dimension scanner than measured by clinometer. Therefore, There is effect that objectification of rock slope investigation data, shortening of investigation periods, investigation reduction of cost. could know that it is very effective method in joint measuring.

• Computers and Concrete
• /
• 제18권2호
• /
• pp.235-266
• /
• 2016

A rock mass containing non-persistent joints can only fail if the joints propagate and coalesce through an intact rock bridge. Shear strength of rock mass containing non-persistent joints is highly affected by the both, mechanical behavior and geometrical configuration of non-persistent joints located in a rock mass. Existence of rock joints and rock bridges are the most important factors complicating mechanical responses of a rock mass to stress loading. The joint-bridge interaction and bridge failure dominates mechanical behavior of jointed rock masses and the stability of rock excavations. The purpose of this review paper is to present techniques, progresses and the likely future development directions in experimental and numerical modelling of a non-persistent joint failure behaviour. Such investigation is essential to study the fundamental failures occurring in a rock bridge, for assessing anticipated and actual performances of the structures built on or in rock masses. This paper is divided into two sections. In the first part, experimental investigations have been represented followed by a summarized numerical modelling. Experimental results showed failure mechanism of a rock bridge under different loading conditions. Also effects of the number of non-persistent joints, angle between joint and a rock bridge, lengths of the rock bridge and the joint were investigated on the rock bridge failure behaviour. Numerical simulation results are used to validate experimental outputs.

• Geomechanics and Engineering
• /
• 제13권4호
• /
• pp.535-570
• /
• 2017

There are only few cases where cause and location of failure of a rock structure are limited to a single discontinuity. Usually several discontinuities of limited size interact and eventually form a combined shear plane where failure takes place. So, besides the discontinuities, the regions between adjacent discontinuities, which consist of strong rock and are called material or rock bridges, are of utmost importance for the shear strength of the compound failure plane. Shear behaviour of persistent and non-persistent joint are different from each other. Shear strength of rock mass containing non-persistent joints is highly affected by mechanical behavior and geometrical configuration of non-persistent joints located in a rock mass. Therefore investigation is essential to study the fundamental failures occurring in a rock bridge, for assessing anticipated and actual performances of the structures built on or in rock masses. The purpose of this review paper is to present techniques, progresses and the likely future development directions in experimental testing of non-persistent joint failure behaviour. Experimental results showed that the presence of rock bridges in not fully persistent natural discontinuity sets is a significant factor affecting the stability of rock structures. Compared with intact rocks, jointed rock masses are usually weaker, more deformable and highly anisotropic, depending upon the mechanical properties of each joint and the explicit joint positions. The joint spacing, joint persistency, number of rock joint, angle of rock joint, length of rock bridge, angle of rock bridge, normal load, scale effect and material mixture have important effect on the failure mechanism of a rock bridge.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.58-63
• /
• 2009

Biaxial compression test was conducted on a transversely isotropic synthetic jointed rock model for the understanding of the fracture behaviors of a sedimentary or metamorphic rocks with well developed bedding or foliation in uni-direction. The joint angles employed for the model are 30, 45, and 60 degrees to the horizontal, and the synthetic rock mass was made of early strength cement. From the biaxial compression test, initiation propagation of tensile cracks at norm to the joint angle was found. The propagated tensile cracks eventually developed rock blocks, which was dislodged from the rock mass. Furthermore, the propagation process of the tensile cracks varies with joint angle: lower joint angle model shows more stable and progressive tensile crack propagation. The experiment results were validated from the simulation by using discrete element method PFC 2D. From the simulation, as has been observed from the test, a rock mass with lower joint angle produces wider damage region and rock block by tensile cracks. In addition, a rock model with lower joint angle shows a progressive tensile cracks generation around the opening from the investigation of the interacted tensile cracks.

• 한국지반공학회논문집
• /
• 제25권10호
• /
• pp.17-30
• /
• 2009

지하에 공동을 건설하는 터널 공사의 경우 초기 응력의 집중 및 발파와 같은 시공단계에서의 과도한 에너지의 적용으로 인하여 주변 암반에 손상을 발생시킨다. 이러한 손상의 발생은 터널에 작용하는 하중 및 터널 주변 암반의 흐름조건에 상당한 영향을 끼친다. 이러한 이유로 터널 주변에 발생하는 손상구간에 대하여 다양한 연구가 수행되었다. 본 연구에서는 유사암석으로 제작된 공동이 존재하는 절리모델의 이축압축실험을 통하여 공동주변의 손상발생을 연구하였다. 절리면은 수평면과 $30^{\circ}$, $45^{\circ}$, $60^{\circ}$의 조건으로 형성되었으며, 초조강시멘트 재료를 이용하여 유사절리모델을 제작하였다. 이축압축 실험결과 공동주변에서는 절리면에 수직한 방향으로 인장균열의 발생이 관측되었으며, 균열의 진행으로 인하여 암반블록이 형성되었으며, 진행하는 인장균열이 다른 절리면에 도달하여 암반블록이 완전히 형성된 경우 탈락하는 과정을 보였다. 이러한 인장균열의 진전은 절리면의 각도에 따라 상이한데 절리면의 각도가 클수록 안정적이며 진행성의 균열 진전 양상이 관측되었다. 이러한 인장균열의 발달은 절리면으로 구성된 암편을 보로 가정 할 경우 공동의 곡률로 인한 기하학적 형상의 불규칙성으로 인하여 모멘트가 작용하는 것으로 판단된다. 이상의 실험결과를 입자요소해석 방법을 기반으로 하는 PFC 2D를 이용하여 모사하였다. 해석결과 실험에서 관측한 바와 같이 절리면 각도가 작을수록 손상대의 폭은 넓어지며 인장균열의 진행에 의한 암반블록의 형성이 관측되었다. 또한 상호작용이 발생하는 균열을 조사한 결과 수치해석에서도 절리면의 각도가 작은 조건에서 진행성의 파괴가 나타났다.

• 산업기술연구
• /
• 제21권B호
• /
• pp.51-58
• /
• 2001

The Distinct Element Method (DEM) was used to analyze the stability of jointed rock slope, of which dimension are about 200m(length), 60m(height), $55^{\circ}$ dip. The Barton-Bandis joint model was used, as a constitutive model. The parameters such as JRC and spatial distribution characteristics of discontinuities were acquired through field investigation. Three different cases such as $51^{\circ}$, $45^{\circ}$ and $38^{\circ}$ in angle of rock slope were analyzed to decide a stable slope. To keep the jointed rock slope safely, it is proposed to reduce the height of slope from 60m to 48m and to reduce the angle of the from $55^{\circ}$ to $38^{\circ}$ too.

• 화약ㆍ발파
• /
• 제28권2호
• /
• pp.1-16
• /
• 2010

본 연구에서는 암반사면형성 작업시 최종벽면에 적용된 프리스플리팅(pre-splitting) 발파공법의 발파효과와 관련하여 발파 후 벽면의 암반손상이 장약된 폭약의 폭력 보다는 암반 내에 발달된 불연속면의 발달 형태에 따라 더 큰 영향을 보일 수 있음을 규명하였다. 이를 위하여 불연속면을 대표할 수 있는 절리에 대한 조사를 통해 발파 후 벽면 암반의 절리군 분포양상을 4가지 Case로 분류하고, 파쇄도 분석 영상처리시스템을 통해 벽면에 나타나는 암반블록의 크기 빈도를 비교 분석함으로써 벽면의 암반손상도를 파악하였다. 절리군이 1개 이하로 발달하는 경우, 분석된 블록의 크기 중 2,000mm 이상 되는 부분이 42%를 차지하여 프리스플리팅 발파공법의 효과를 뚜렷이 확인할 수 있었으며, 2~3개의 절리군이 일방향으로 발달하는 경우와 교차되면서 발달하는 경우, 블록의 크기는 1,000~2,000mm 사이에 각각 43.6% 및 35.8%의 빈도로 분포하는 것으로 나타나 프리스플리팅 발파공법에 의한 발파효율이 다소 떨어지는 양상을 보였다. 그러나 3개 이상의 절리군이 불규칙하게 발달하는 경우에는 블록의 크기가 250~500mm 사이에 35%의 빈도로 분포하고 1,000mm 이상의 크기에 대해서는 거의 나타나지 않는 양상을 보였다. 따라서 이러한 경우 프리스플리팅 발파공법에 의한 발파 효과는 거의 없이 일반적인 발파가 이루어졌다고 볼 수 있었다. 또한 PFC2D에 의한 발파수치해석결과, 암반 내부로의 손상영역 발생은 본 발파보다는 프리스플리팅 발파공법에 의해 직접적인 영향을 받을 수 있음을 확인하였으며, 따라서 향후 사면 형성을 위한 프리스플리팅 발파공법을 적용할 경우에는 사전 지표지질조사를 시행하여 절리를 비롯한 불연속면과 관련된 사항을 충분히 파악할 필요가 있으며, 시공진행에 따라 예상보다 많은 절리군이 나타날 경우에는 프리스플리팅 발파공법의 설계 조정이 필요할 것으로 판단된다.

• Geomechanics and Engineering
• /
• 제13권6호
• /
• pp.977-995
• /
• 2017

It is well accepted that rock failure mechanism influence the cutting efficiency and determination of optimum cutting parameters. In this paper, an attempt was made to research the factors that affect the failure mechanism based on discrete element method (DEM). The influences of cutting depth, hydrostatic pressure, cutting velocity, back rake angle and joint set on failure mechanism in rock-cutting are researched by PFC2D. The results show that: the ductile failure occurs at shallow cutting depths, the brittle failure occurs as the depth of cut increases beyond a threshold value. The mean cutting forces have a linear related to the cutting depth if the cutting action is dominated by the ductile mode, however, the mean cutting forces are deviate from the linear relationship while the cutting action is dominated by the brittle mode. The failure mechanism changes from brittle mode with larger chips under atmospheric conditions, to ductile mode with crushed chips under hydrostatic conditions. As the cutting velocity increases, a grow number of micro-cracks are initiated around the cutter and the volume of the chipped fragmentation is decreasing correspondingly. The crack initiates and propagates parallel to the free surface with a smaller rake angle, but with the rake angle increases, the direction of crack initiation and propagation is changed to towards the intact rock. The existence of joint set have significant influence on crack initiation and propagation, it makes the crack prone to propagate along the joint.