• Smart Structures and Systems
• /
• v.26 no.1
• /
• pp.1-10
• /
• 2020

Turkey is a transcontinental country located partly in Asia and partly in Europe, and hosted by diverse civilizations including Hittite, Urartu, Lydia, Phrygia, Pontius, Byzantine, Seljuk's and Ottomans. At various times, these built many historic monuments representing the most significant characteristics of their civilizations. Today, these monuments contribute enormously to the esthetic beauty of environment and important to many cities of Turkey in attracting tourism. The survival of these monuments depends on the investigation of structural behavior and implementation of needed repairing and/or strengthening applications. Hence, many countries have made deeper investigations and regulations to assess their monuments' structural behavior. This paper presents the dynamic behavior investigation of a monumental masonry mosque, the "İskenderpaşa Mosque" in Trabzon (Turkey), by performing an experimental examination with non-destructive testing. The dynamic behavior investigation was carried out by determining the dynamic characteristic called as natural frequencies, mode shapes and damping ratios. The experimental dynamic characteristics were extracted by Operational Modal Analysis (OMA). In addition, Finite Element (FE) model of masonry mosque was constructed in ANSYS software and the numerical dynamic characteristics such as natural frequencies and mode shapes were also obtained and compared to experimental ones. The paper aims at presenting the non-destructive testing procedure of a masonry mosque as well as the comparison of experimental and numerical dynamic characteristics obtained from the mosque.

• YAKHAK HOEJI
• /
• v.42 no.6
• /
• pp.627-633
• /
• 1998

Impurity profiling analysis of methamphetamine seized in Korea was investigated for the evidential and intelligent purpose. Samples were extracted with ethylacetate which contai ns internal standard of dioctylsebacate under basic condition and extracts were analyzed by GC-FID. Ephedrine, chloroephedrine & 1,2-dimethyl-3-phenylaziridine were identified impurities in illicit methamphetamine by GC-MS. These impurities revealed that most of abused methamphetamine in Korea were synthesized from ephedrine as a starting material. For the classification of samples. firstly, 24 impurity peaks were selected after inspection of every peak in 50 samples as the specific markers of impurities. Secondly, corresponding peak retention time and area ratio to the internal standard were calculated and database was created with values of 24 peaks by in-house program. Finally, cluster analysis was attempted with the resultant profiles using the STAR plot, which was based on the Euclidian distance for evaluating similarity among samples. A total of 76 samples were divided into 8 different groups within 90% statistical similarity and inter-batch samples showed similar impurity patterns by this procedure. In conclusion, the analysis of impurities is a suitable index for estimation the common or different origin of methamphetamine sample.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.2
• /
• pp.121-127
• /
• 1994

A procedure for the direct detection of (1-3)-$\beta$-glucanase isozymes in electrophoresis gels was developed. The procedure employed the commercial preparation of AZCL-pachyman as a chromogenic substrate for (1-3)-$\beta$-glucanases. The procedure detected the three basic isozymes which have been known to be expressed in germinating barley kernels. A major acidic and a minor isozymes were also detected in germinating kernels. The procedure was proved to be fast, simple and sensitive enough to be used for the analysis of the expression of (1-3)-$\beta$-glucanase isozymes in plant tissues. The detection limit of the procedure for the commercial preparation of Penicillium (1-3)-$\beta$-glucanase was estimated to be as low as 50$\mu$U. The procedure could be used for the investigation of (1-3)-$\beta$-glucanases in laboratories facilitated with ordinary equipments and research personnel.

• Analytical Science and Technology
• /
• v.12 no.3
• /
• pp.260-264
• /
• 1999

A simple and rapid procedure, called FoLT-PCR(Formamide Low Temperature-Polymerase Chain Reaction) was applied to amplifying DNA directly from various forensic biological evidences including human blood, saliva, hair root, or semen without any DNA preparative steps. We added washing step with non-ionic detergent, 1% Triton X-100, and used Taq DNA polymerase instead of Tth DNA polymerase to amplify 3 STR loci and gender allele simultaneouly. Optimal concentration of formamide and annealing temperature were determined empirically to 8%(v/v), and $48^{\circ}C$ respectively. We also compared this method with standard PCR.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.6 no.4
• /
• pp.387-398
• /
• 2008

To obtain base-line data in the low- and intermediate-level radioactive waste disposal facility, radiological environment investigation is required at least two years prior to the facility operation near the disposal facility. The investigation has been performed since January 2007 for the Wolsong LILW disposal center. In this paper, investigation procedure and detailed information obtained for six months in 2008 are described. Based on the current results, future investigation planning is also discussed for the radiological environment management of the disposal facility.

• Tribology and Lubricants
• /
• v.19 no.3
• /
• pp.167-177
• /
• 2003

The study deals with the development of a thermohydrodynamic (THD) computational procedure for evaluating the pressure, temperature and velocity distributions in fluid films with very rough geometry. A parametric investigation is performed to predict the bearing behaviors in the lubricating film having the absorbed layers and their interfaces determined by the rough surfaces with Gaussian distribution. The layers are expressed as functions of the standard deviations of each surface to characterize flow patterns between both the rough sur-faces. The velocity variations and the heat generation are assumed to occur in the central (shear) zone with the same bearing length and width. The coupled effect of surface roughness and shear zone dependency on hydrodynamic pressure and temperature has been found in non-contact mode. The procedure confirms the numerically determined relationship between the pressure and film gap on condition that its roughness magnitude is smaller than the fluid film thickness.

• KSTLE International Journal
• /
• v.6 no.1
• /
• pp.21-27
• /
• 2005

A technique for a wear volume calculation is improved and verified in this research. The wear profile data measured by a surface roughness tester is used. The present technique uses a data flattening, the FFT and the windowing procedure, which is used for a general signal processing. The measured value of an average roughness of an unworn surfnce is used for the baseline of the integration for the volume calculation. The improvements from the previous technique are the procedures of the data flattening and the determination of a baseline. It is found that the flattening procedure efnciently manipulates the raw data when the levels of it are not horizontal, which enables us to calculate the volume reasonably well and readily. By comparing it with the weight loss method by using artificial dents, the present method reveals more volume by aroung 3~10%. It is attributed to the protruded region of the specimen and the inaccuracy and data averaging during the weght loss measurement. From a thorough investigation, it is concluded that the present technique can provide an accurate wear volume.

• Korean Management Science Review
• /
• v.27 no.2
• /
• pp.45-54
• /
• 2010

In this paper we analyze the effects of loading-unloading environments on the efficiency of freight railroad stations using a two-stage procedure for efficiency model estimation. And from the results we explore a way for efficiency improvement of freight railroad stations. Two-stage procedure is composed of data envelopment analysis and regression analysis. The results show that we could expect efficiency improvement through the government"s effort to make railway stations to be strategic position. Furthermore, they advocate policy-makers that efficiency can be improved by simplifying the kinds of freight items and increasing the scale.

• Advances in aircraft and spacecraft science
• /
• v.5 no.6
• /
• pp.615-632
• /
• 2018

Mechanical buckling of a rectangular functionally graded plate is obtained in the current paper using a refined higher-order shear and normal deformation theory. The impact of transverse normal strain is considered. The material properties are microscopically inhomogeneous and vary continuously based on a power law form in spatial direction. Navier's procedure is applied to examine the mechanical buckling behavior of a simply supported FG plate. The mechanical critical buckling subjected to uniaxial and biaxial compression loads are determined. The numerical investigation are compared with the numerical results in the literature. The influences of geometric parameters, power law index and different loading conditions on the critical buckling are studied.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.6
• /
• pp.857-863
• /
• 2003

In rotating machinery, unbalance and misalignment are major concerns in vibration. Unbalance can be eliminated by balancing procedure to some degree. but little work has been done on the vibrations that occur in a misaligned rotor system. Currently, no generalized theoretical model based on a rotor system with flexible coupling is available to describe the vibrations caused by misalignment. As a part of systematic investigation on the misalignment, first of all, the study on flexible coupling with misalignment should be preceded. In this study, the geometry and reaction force and moment of a gear coupling with misalignment was investigated, also the theoretical model of a gear coupling with misalignment was presented by using the relationship between geometry and moment of gear coupling. It is expected that the proposed procedure can be applied to derive the theoretical model of other couplings.