• The Journal of Korean Academy of Prosthodontics
• /
• v.35 no.4
• /
• pp.706-718
• /
• 1997

Ceramometal crowns are common restorations in fixed prosthodontics because of their casting accuracy, the high strength properties of the metal, and the cosmetic appearance of porcelain. However, deterioration of the initial fit of the metal coping has been observed after the porcelain firing cycle. The distortion due to repeated firing makes it difficult to fit crown margin and elicits microleakage. The major causes of distortion are the residual stress that accumulate during wax-up, casting, cold work and the induced stress caused by the mismatch of porcelain-metal thermal contraction. This study examined the marginal fit changes of metal copings in relation to repeated firing and the effects of heat treatment that reduce the distortion resulted from residual stress. The marginal changes of the copings that were treated with conventional method and those treated with heat before repeated firing, were evaluated. The metal die which represented preparations of a maxillary central incisor was fabricated, and 45 wax patterns were cast with nonprecious metal alloys. The heat treatment of each group was performed as follows. Group 1(control) : Casting - Devesting - Cold work - Firing Group 2 : Casting - Heat treatment - Devesting - Cold work - Firing Group 3 : Casting - Devesting - Cold work - Reinvesting - Heat treatment - Devesting - Firing The copings were fired 3 times. After each firing, the marginal fit changes were measured with inverted metallurgical microscope at the 4 reference points located at labial, lingual, and both proximal surface. Measurements were compared, and statistically analyzed. The results were as follows ; 1. In all groups, the highest value of marginal fit changes of the copings studied were found after the first firing cycle. 2. When the distortion of each experimental group at the first firing cycle were compared, group 1 exhibited the greatest changes($20-27{\mu}m$), followed by group 2($9-13{\mu}m$), and group 3($8-10{\mu}m$). 3. The copings treated with heat before devesting(group 2) revealed significantly smaller marginal fit changes than the copings treated with conventional method(group 1). (p<0.01) 4. The copings treated with heat after reinvesting(group 3) revealed significantly smaller marginal fit changes than the copings treated with conventional method(group 1). (p<0.01) 5. No siginificant differences in marginal fit changes were found between the copings treated with heat before devesting(group 2) and the copings treated with heat after reinvesting(group 3). (p>0.01)

• Journal of the Korean Society for information Management
• /
• v.21 no.3
• /
• pp.1-14
• /
• 2004

Visualization of documents will help users when they do search similar documents. and all research in information retrieval addresses itself to the problem of a user with an information need facing a data source containing an acceptable solution to that need. In various contexts. adequate solutions to this problem have included alphabetized cubbyholes housing papyrus rolls. microfilm registers. card catalogs and inverted files coded onto discs. Many information retrieval systems rely on the use of a document surrogate. Though they might be surprise to discover it. nearly every information seeker uses an array of document surrogates. Summaries. tables of contents. abstracts. reviews, and MARC recordsthese are all document surrogates. That is, they stand infor a document allowing a user to make some decision regarding it. whether to retrieve a book from the stacks, whether to read an entire article, etc. In this paper another type of document surrogate is investigated using a grouping method of term list. lising Multidimensional Scaling Method (MDS) those surrogates are visualized on two-dimensional graph. The distances between dots on the two-dimensional graph can be represented as the similarity of the documents. More close the distance. more similar the documents.

• Archives of Plastic Surgery
• /
• v.37 no.1
• /
• pp.59-66
• /
• 2010

Purpose: In the finger, there are three major palmar arches in the arterial system. The location of this arches are constant. The middle and distal transverse arches are consistently large (almost 1 mm) and may be used for arterial vessel repairs either proximally or distally, depending on the length and direction needed. This paper describes our experiences in reconstruction and replantation of the finger using rerouting the transverse digital palmar arch. Methods: 31 patients with injuries according to our classification were treated from March of 2005 to October of 2008. In this study the authors subdivided injuries into those with amputation distal to the insertion of the flexor digitorum profundus (Class I, 31 fingers); those with amputation distal to the insertion of the flexor digitorum superficialis (Class II, 4 fingers). Replantation was performed using the artery-only technique with neither vein nor nerve repair. Because the artery has been damaged, it is still possible to make a direct suture by transposing the arterial arch in an inverted Y to I arterial configuration or converting the arch. Venous drainage was provided by an external bleeding method with partial nail excision, medical leech, and repaired margin. Results: The success rate was 87% (n=27) in class I and 75% (n=4) in class II. The authors conclude that crushing and complete avulsion injuries & amputations are salvageable, with acceptable functional results in select patients, especially those with amputation distal to the insertion of the flexor digitorum superficialis. Conclusion: We performed replantation and reconstruction with only-arterial transposing anastomosis successfully, resulting in good recovery of aesthetic and functional outcome. Three major digital palmar arches, especially distal two branches, give us additional treatment options. In the finger replantation and reconstructive techniques using rerouting healthy the transverse digital palmar arch increase the survival rate of the finger.

• Journal of Technology Innovation
• /
• v.25 no.3
• /
• pp.25-50
• /
• 2017

Declining research competitiveness and inefficiency are constantly being raised in the National Assembly and the media for the Government-funded Research Institutes(GFRIs), which are highly dependent on government funding. These external stakeholders point to the workforce aging of the GFRIs as one of the main causes of inefficiency. They insist that the aging leads to an increase in labor costs, a discontinuity in research, a decrease in employment of new researchers, and a decrease in research competitiveness. However, the GFRIs argue that the aging is a natural phenomenon due to an increase in the age of recruitment, and even if there is an side effect, it is extremely small or even vice versa. It is interesting that there is no empirical study identifying the correlation between the workforce aging and the research performance of the GFRIs, despite the discussion. This study tracked and analyzed the changes of the research performance and the workforce for the five years from 2011 to 2015, and tried to demonstrate the correlation between the workforce aging and the research performance. As a result, we confirmed that there is an inverted U-type correlation between the aging and the papers, one of the research performance, and that the optimal age is 44.96 years. Also, we could not find any correlation between the aging and the patents.

• The Journal of Internal Korean Medicine
• /
• v.29 no.1
• /
• pp.130-148
• /
• 2008

Objective : This study was designed to investigate the effect of the water extract of Gamisamgibopae-tang(GMSGBPT), an oriental herbal formulation, on the growth of NCI-H460 and A549 human non-small-cell lung cancer cell lines. Methods : Cytotoxicity and cell morphology were evaluated by MTT assay and inverted microscope, respectively. Apoptosis was detected using agarose gel electrophoresis and flow cytometer. The expression levels of mRNAs and proteins of target genes were determined by RT-PCR and western blot analyses, respectively Result and Conclusion : We found that exposure of A549 cells to GMSGBPT resulted in the growth inhibition in a dose-dependent manner as measured by MTT assay, but GMSGBPTdid not affect the growth of NCI-H460 cells. The anti-proliferative effect of GMSGBPT treatment in A549 cells was associated with morphological changes, formation of apoptotic bodies and DNA fragmentation, and flow cytometry analysis confirmed that GMSGBPT treatment increased the populations of apoptotic-sub G1 phase. Growth inhibition and apoptotic cell death by GMSGBPT were connected with a up-regulation of cyclin-dependent kinase inhibitor p21 (WAF1/CIP1) mRNA and protein in a tumor suppressor p53-independent fashion. However GMSGBPT treatment did not affect other growth regulation-related genes such as early growth response-1 (Egr-1), nonsteroidal anti-inflammatory drug (NSAID)-activated gene-1 (NAG-1), inducible nitric oxide synthase (iNOS), cyclooxygenases (COXs), telomere-regulatory factors in A549 orNCI-H460 cells. Taken together, these findings partially provide novel insights into the possible molecular mechanism of the anti-cancer activity of GMSGBPT.

• Journal of Embryo Transfer
• /
• v.32 no.4
• /
• pp.311-317
• /
• 2017

Cryopreservation of oocytes by vitrification technique may contribute a lot in the field of reproductive biotechnology. The objectives of the present study were to evaluate the effectiveness of two cryo-devices for vitrification of immature oocytes of indigenous zebu cows. Slaughter house derived immature cumulus-oocyte-complexes (COCs) of cows were vitrified using 15% dimethyl sulphoxide (DMSO) as cryoprotective agent (CPA) with 0.5 mol sucrose in TCM 199 supplemented with 20% FBS. Vitrification of COCs was completed after immediate plunging of COCs loaded cryotop or French mini straw into the liquid nitrogen ($LN_2$). Then the COCs containing cryotop or French mini straws were warmed in 0.25 mol sucrose and 20% FBS supplemented TCM 199 followed by in vitro culture in $50{\mu}l$ droplets of bicarbonate buffered TCM 199 supplemented with 10% FBS, pyruvate, FSH and oestradiol for 24 hrs at $39^{\circ}C$ with 5% CO2 in humidified air. After maturation culture, oocytes were denuded and examined under inverted microscope for presence of polar body as the indication of maturation. Denuded oocytes were also stained by whole mount technique using 1% orcein to examine the maturation by presence of MII chromosomes. The in vitro maturation rate was significantly (p<0.05) higher in oocytes vitrified and warmed using crytop ($47.1{\pm}6.9%$) than that of French mini straw ($15.9{\pm}12.5%$). Moreover, in vitro maturation rate was significantly (p<0.05) highe r in control oocytes (not vitrified) ($84.5{\pm}14.2%$) than that of vitrified oocytes. In conclusion, cryotop is better than French mini straw as cryo-device for vitrification of bovine immature oocytes.

• Journal of Technology Innovation
• /
• v.18 no.1
• /
• pp.75-98
• /
• 2010

The purpose of this paper is to give policy implications for relevant policy-makers by analyzing factors affecting performance of industrial R&D programs of the Ministry of Knowledge Economy. The independent variables are type of project leader organization(Big Enterprises, SMEs, Ventures Businesses, Public Research Institutions, Universities), cooperative or noncooperative R&D among industry-university-research institution, total number of project participant organization, total R&D investment, and the ratio of private investment to total R&D investment. The dependent variables are domestic or foreign patents granted and domestic or foreign papers accepted. The method of analysis is Poisson Regression analysis operated by STATA. The results of this research are follows ; Universities show higher R&D performance compared to enterprises or public research institutions in terms of patents and papers as well. Venture businesses show higher patent performance compared to SMEs. Inverted U-shaped relationship between total number of project participant organization and R&D performance is not supported. The higher total R&D investment, the higher R&D performance. The higher the ratio of private investment to total R&D investment, the higher R&D performance.

• The Journal of Internal Korean Medicine
• /
• v.28 no.3
• /
• pp.409-420
• /
• 2007

Objectives : The purpose of this study was to identify the anti-tumor effects of realgar on various cancer cells through molecular biologic and cellular biologic methods. Materials & Methods : We used 5 kinds of cancer cell lines:stomach cancer cell (AGS), glioma cells (T98G, A172, SNU-489) and prostate cancer cells (LNCaP). We injected the boiled extract of realgar. $50{\mu}$g/ml and $100{\mu}$g/ml to culture media (ml) for 24 hours. We examined the morphological changes under an inverted microscope and a fluorescence microscope. We measured the suppressive effect on viability of 5 kinds of cancer cells via XTT assay. We examined the effect on the revelation of PARP cleavage, Bcl-2 protein and Bax protein by western blot analysis. Results : The extract of realgar caused markedly morphological changes on AGS, T98G, SNU-489, and LNCaP. All of them showed withdrawn and floating appearance. The suppressive effect on viability of AGS, T98G, A172, SNU-489, and LNCaP showed that each test group had more suppressive effect on viability of AGS, T98G, A172, SNU-489, and LNCaP than the control group, which was statistically significantly (p<0.01). The extract of realgar did not induce PARP cleavage in AGS, T98G, A 172, SNU-489, or LNCaP. In the revelation of protein related to apoptosis, the protein levels of Bcl-2 decreased and the protein levels of Bax increased in AGS, T98G, SNU-489, and LNCaP treated with realgar. The protein levels of Bcl-2 decreased and the protein levels of Bax did not change in A172 treated with realgar. Conclusions : This experiment showed that realgar has anti-tumor effect on stomach cancer cells (AGS), glioma cells (T98G, SNU-489L and prostate cancer cells (LNCaP)

• Journal of Chest Surgery
• /
• v.30 no.8
• /
• pp.739-746
• /
• 1997

A variety of experiments concerning the development of ideal prosthetic grafts for correcting circumferential tracheal defects have been performed. The requirements for an ideal tracheal prosthesis are impermeability to air, consistency to prevent collapse, and acceptance by the host tissue causing a minimum inflammatory reaction, allowing fibroblastic infiltration and epithelialization. The synthetic material, polyurethane(PU), is known as a biocompatible polymer with an inert component. In this study, the tracheal prosthesis was made from microporous PU(30 micrometer in diameter) coated with gelatin and reinforced with isoplastic rings. This procedure provides the prosthesis with a compression strength. The out side diame er of the prosthesis was 20 mm with a length of 30 mm. The gelatin used in the study was obtained from pig skin and immobilized and cross-linked by irradiation(60 Co gamma ray) to promote host tissue incorporation and render the prosthesis epithelization after implantation. Animal experiments using 10 mongrel dogs were performed to compare three kinds of prosthesis; gelatin coated polyurethane graft, uncoated polyurethane graft, and prosthesisf pericadium complex graft. After 6 weeks of implantation, the epithelialization of implants was seen on the gelatin-coated and prosthesisfpericadium complex grafts. Implanted prosthesis were complicated by airway obstruction due to anastomosis granuloma. Early tracheal stenosis was found in the uncoated graft group. Two kind of anastomosis techniques were tested on the gelatin-coated prosthesis. Everted anastomosis resulted severe granuloma than the inverted anastomosis. In the prosthesislpericadium complex graft, bacteria and inflammation at a anastomotic site was found. Based on these results, gelatin coated porous polyurethane trachea prosthesis is biocompatible and may be useful in clinical application with further investigation.

• The Korean Journal of Petroleum Geology
• /
• v.1 no.1 s.1
• /
• pp.15-27
• /
• 1993

Seismic reflection profiles from the eastern continental margin of Korea delineate three major Neogene sedimentary basins perched on the shelf and slope regions: Pohang-Youngduk, Mukho and Hupo basins. The stratigraphic and structural analyses demonstrate that the formation and filling of these basins were intimately controlled by two phases of regional tectonism: transtensional and subsequent contractional deformations. In the Oligocene to Early Miocene, back-arc opening of the East Sea induced extensional shear deformation with dextral strike-slip movement along right-stepping Hupo and Yangsan faults. During the transtensional deformation, the Pohang-Youngduk Basin was formed by pull-apart opening between two strike-slip faults; in the northern part, block faulting caused to form the Mukho Basin between basement highs. As a result of the back-arc closure, the stress field was inverted into compression at the end of the Middle Miocene. Under the compressive regime, two episodes (Late Miocene and Early Pliocene) of regional deformation led to the destruction and partial uplift of the basin-filling sequences. In particular, during the second episode of compressive deformation, the Hupo fault was reactivated with an oblique-slip sense, which resulted in an opening of the Hupo Basin as a half-graben on the downthrown fault block.