• Steel and Composite Structures
• /
• v.29 no.4
• /
• pp.483-491
• /
• 2018

Timoshenko beam model is widely exploited in the literature to examine the mechanical behavior of stubby beam-like components. Timoshenko beam theory is well-known to require the shear correction factor in order to recognize the nonuniform shear distribution at a section. While a variety of shear correction factors are appeared in the literature so far, there is still no consensus on the most appropriate form of the shear correction factor. The Saint-Venant's flexure problem is first revisited in the frame work of the classical theory of elasticity and a highly accurate approximate closed-form solution is presented employing the extended Kantorovich method. The resulted approximate solution for the elasticity field is then employed to introduce two shear correction factors consistent with the Cowper's and energy approaches. The mathematical form of the proposed shear correction factors are then simplified and compared with the results available in the literature over an extended range of Poisson's and aspect ratios. The proposed shear correction factors do not exhibit implausible issue of negative values and do not result in numerical instabilities too. Based on the comprehensive discussion on the shear correction factors, a piecewise definition of shear correction factor is introduced for rectangular cross-sections having excellent agreement with the numerical results in the literature for both shallow and deep cross-sections.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.630-635
• /
• 2012

Nearfield acoustic holography method predicts an unmeasured sound field, therefore it depends on its prediction methods. In particular, if one has radiators or scatters, which cannot be expressed by simple geometry, then inverse boundary element method (BEM) is normally employed to reconstruct the sound field induced by sound sources with irregular profiles. The characteristics of boundary element, including the element shape, characteristic length, order of shape function and others, affect the reconstruction error. Investigating the errors by means of changing these factors will provide a guide line for selecting appropriate factors, associated with the elements of BEM. These factors are investigated by numerical simulations, and the accuracies with respect to the variant factors are compared. Novel suggestions for selecting appropriate boundary element factors are described based on the simulation results.

• Asian Pacific Journal of Cancer Prevention
• /
• v.17 no.9
• /
• pp.4527-4531
• /
• 2016

Background: PTEN protein is one of the most important tumour suppressor factors which is detectable by immunohistochemistry. The goal of the present study was to investigate the prognostic role of PTEN gene expression in breast cancer patients. Materials and Methods: This descriptive-analytical study was conducted on 100 breast cancer patients referred to Sabzevar hospitals in the north-east of Iran between 2010 and 2011, who were followed up to 2015. PTEN gene expression in tissue samples was determined using specific monoclonal antibodies and data were analyzed using Chi-square test and Fisher's exact test. Patient survival was analyzed after 4 years of follow-up using the Cox regression model. Results: PTEN gene expression was evident in 70 of 100 cnacer samples but was found at high levels in all non-cancer samples. There was an inverse significant relationship between PTEN gene expression and tumour stage or tumour grade (p<0.001). The expression of PTEN in invasive ductal tumours was lower than in non-invasive tumours. There was also an inverse significant relationship between the hazard of death and PTEN gene expression (p<0.001). In addition, there was an inverse significant relationship between tumour stage and hazard of death (p<0.001). Conclusion: These findings indicate that lack of PTEN gene expression can be a sign of a worse prognosis and poor survival in breast cancer cases.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.5
• /
• pp.1055-1063
• /
• 2012

The noise of image is added by many environmental factors. Therefore, we need to remove these noises using the conventional filtering methods, which are optimized based on the statistical characteristic of noise. In direct restoration method, there is an inverse filter and the wiener filter. Here, the wiener filter is the optimized filter in the view of least square method. First, we are going to study the inverse filter, wiener filter, constraint least square filter. Second, in order to control the quantity, we use the parameters instead of the power spectrum ratio. But, these parameters have the conflicting condition, therefore, we optimized the variables using parametric wiener filter which adjust the application appropriately. In the simulation results, the contrast of the degraded image was enhanced and the noise was removed. Comparative experimentation was demonstrated edge preserving and noise removing property.

• Nutrition Research and Practice
• /
• v.18 no.1
• /
• pp.132-148
• /
• 2024

BACKGROUND/OBJECTIVES: This study aimed to assess the current mean daily intake of 10 food groups, analyze the sociodemographic factors associated with food consumption, and determine the associations between food consumption/dietary intake and the prevalence rates of obesity, type 2 diabetes (T2D), and hypertension (HTN) in Jakarta, Indonesia. SUBJECTS/METHODS: A total of 600 participants aged 20-85 yrs were included in this cross-sectional study. Food consumption and dietary habits were assessed using a food frequency questionnaire. To determine the association between food consumption/dietary habits and the abovementioned diseases, logistic regression analysis was performed. RESULTS: The average vegetable and fruit intake was lower, while sugar and salt consumption were higher than that recommended by Indonesia's national dietary guidelines. A high intake of ultra-processed foods (UPFs) was associated with young age, men, "single" status, a high education level, and employment with a high monthly income. Obesity and T2D were positively correlated with high intakes of cereals and tubers, UPFs, sugars, fats, and oils. Conversely, an inverse association was found between legume, vegetable, and fruit consumption and obesity risk. An inverse correlation was also observed between vegetable consumption and T2D risk. Moreover, a high salt intake was inversely correlated with fruit consumption in terms of HTN risk. Non-indulgence in habitual late-night snacking and refrainment from consuming more than one dish at each meal were also negatively related to the prevalence of obesity, T2D, and HTN. Inverse correlations were also observed between the prevalence rates of T2D and HTN and abstaining from adding sugar to beverages. CONCLUSION: Foods high in fat, sugar, and sodium were strongly associated with the risks of obesity, T2D, and HTN. Additionally, poor eating habits were also associated with disease development.

• Journal of Communications and Networks
• /
• v.1 no.3
• /
• pp.166-181
• /
• 1999

The object of this paper is to investigate the influence of antenna pattern on indoor radio channel characteristics. Different from previous works where this analysis was carried out at a fixed frequency using different antennas, in the present paper (where measurements were taken in a wide frequency range) the variation of the radiation pattern was caused by two factors: the change of the radiation pattern when the same antenna was used at different frequenicies and the use of different type of antennas. To carry out this analysis, frequency domain measurements of the indoor radio channel at 1 GHz, 5.5 GHz, 10 GHz and 18 GHz were collected. Measurements were taken using a network analyzer. Serveral re-alizations of the channel transfer function were obtained varying, for each measurement, the positon of the transmitter and keep-ing the receiver fixed. Estimate of the channel impulse response was obtained from the Inverse Fourier Transform (IFT) of the fre-quency response. The measurements were performed in an office enviroment with mostly metallic walls and inner separations. The obtained data were elaborated to obtain the power versus distance relationship, the Cummulative Distribution Functions(CDFs) of rms Delay Spread(DS) and of the 3 dB frequency correlation band-width. Finally, the 3 dB width of the frequency correlation func-tion has been empirically related to the inverse of the rms DS of the impulse response.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.23 no.2
• /
• pp.97-105
• /
• 2020

In order to set up radar cross section(RCS) reduction factors for a target, the scattering point position of the target should be identified through inverse synthetic aperture radar(ISAR) image analysis. For this purpose, ISAR image focusing is important. Maritime ship is non-linear maneuvering in the sea, however, which blur the ISAR image. To solve this problem, translational and rotational motion compensation are essential to form focused ISAR image. In this paper, hourglass and ISAR image analysis are performed on the collected data in the sea instead of using the prediction software tool, which takes much time and cost to make computer-aided design(CAD) model of the ship.

• Journal of Korean Society for Quality Management
• /
• v.41 no.4
• /
• pp.659-672
• /
• 2013

Purpose: The purpose of this study was to estimate life time of halogen lamps and acceleration factors using accelerated life test. Methods: Voltage was selected as an accelerating variable through the technical review about failure mechanism. The test was performed at 14.5V, 15.5V and 16.5 for 4,471 hours. It was assumed that the lifetime of Halogen lamps follow Weibull distribution and the inverse power life-stress relationship models. Results: Mean lifetimes of pin and screw types were 19,477 hours and 6,056 hours, respectively. In addition, acceleration factor of two items are calculated as 4.8 and 2.2 based on 15.5V, respectively. Conclusion: The life-stress relationship, acceleration factor, and MTTF at design condition are estimated by analyzing the accelerated life test data. These results suggest that voltage was very important factor to accelerate life time in the case of halogen lamps and the life time of pin type is three times longer than screw type lamps.

• Journal of Korean Society of Steel Construction
• /
• v.12 no.6
• /
• pp.671-680
• /
• 2000

This paper provides the results of the study on the structural behavior of the composite metal deck slab system. The experimental study on composite slabs with trapezoidal and inverse-triangle-top-flange deckplate result, it was found that the geometry of the cross-section was more important than any other factors to ensure the composite action of deck slabs. Hence the inverse-triangle-top-flange of closed box was more effective on the shear slip and deflection than the trapezoidal deck of open shape. These results show that the continuing development of composite deck plate must consider importantly the geometry of the deck. The experimental results were compared with established formulas and were analysed to advance a theory on composite slabs using deckplates.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.445-450
• /
• 2003

This study was performed 10 develop the accelerated life test method using Weibull-IPL(Inverse Power Law) model for mechanical components. Weibull-IPL model is concerned with determining the assurance life with confidence level and the accelerated life test time From the relation of weibull distribution factors and confidence limit, the testing times on the no number of failure acceptance criteria arc determined. The mechanical components generally represent wear and fatigue characteristics as a failure mode. IPL based on the cumulative damage theory is applied effectively the mechanical components to reduce the testing time and to achieve the accelerating test conditions. As the actual application example, accelerated life test method of agricultural tractor transmission was described. Life distribution of agricultural tractor transmission was supposed to follow Weibull distribution and life test time was calculated under the conditions of average life (MTBF) 3,000 hours and 90% confidence level for one test sample. According to IPL, because test time call be shorten in case increase test load test time could be reduced by 482 hours when we put the load 1.1 times of rated load than 0.73 times of rated load that is equivalent load calculated by load spectrum of the agricultural tractor. This time, acceleration coefficient was 11.7.