• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.8
• /
• pp.3689-3700
• /
• 2016

It is not practically feasible to apply hardware-based fault-tolerant schemes, such as hardware replication, in mobile devices. Therefore, software-based fault-tolerance techniques, such as checkpoint and rollback schemes, are required. In checkpoint and rollback schemes, the optimal checkpoint interval should be applied to obtain the best performance. Most previous studies focused on minimizing the expected execution time or response time for completing a given task. Currently, most mobile applications run in real-time environments. Therefore, it is extremely essential for mobile devices to employ optimal checkpoint intervals as determined by the real-time constraints of tasks. In this study, we tackle the problem of determining the optimal inter-checkpoint interval of checkpoint and rollback schemes to maximize the deadline meet ratio in real-time systems and to build a probabilistic cost model. From this cost model, we can numerically find the optimal checkpoint interval using mathematical tools. The performance of the proposed solution is evaluated using analytical estimates.

• Journal of Ocean Engineering and Technology
• /
• v.15 no.4
• /
• pp.86-91
• /
• 2001

In lateral ground flow, slope stability, and land slide problems, H-piles have been often used for a horizontally deforming ground to prevent the failure of mass of soil in a downward and outward movement of a slope. Here, Theoretical equations are derived to estimate the lateral force, assuming that the Mohr-coulomb's Plastic states occures in the ground just around H-piles. In this study, the mechanism of lateral force acting on passive pile that is in a row, situated in the ground undergoing plastic deformation was discussed, and its theoretical analysis was carried out considering the interval between H-piles. The solution of the theoretical equation derived from here showed resonable characteristic for constants of soil as well as for the interval, widths, and heights of H-pile.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.49 no.5
• /
• pp.3-9
• /
• 2007

In this study, the effect of the purification materials is analyzed and tested by Flow 3D and Hydraulic model test. Three dimension numerical analysis led from the research that sees abnormal form and the size back of the water purification material conferred the flowing water conduct inside the test channel against the test condition. Comparison it analyzed the flux distribution, a water depth of the channel which establishes the water purification materials the cross section, an interval of the water purification material, a conference with general channel, it change executed. As a result, the cross section ratio of the purification materials against and a flux change from the test which it sees. The interval of the purification materials in order to prevent three dimension that follows in decrease of increase and flux must decide an interval.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.4
• /
• pp.1376-1391
• /
• 2015

In bus delay-tolerant networks, the route of bus is determinate but its arrival time is indeterminate. However, most conventional approaches predict future contact without considering its uncertainty, which makes a limitation on routing performance. A novel approach is proposed by employing interval algebra to characterize the contact's uncertainty and time-varying nature. The contact is predicted by using the Bayesian estimation to achieve a better routing performance. Simulation results show that this approach achieves a good balance between delivery latency and delivery ratio.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.11
• /
• pp.2923-2931
• /
• 1996

In this paper, the symbol error probability for orthogonal frequency division multiplexing (OFDM) in the multipath fading environment is obtained analytically. In the analysis, OFDM signals with and without the guard interval are considered, and the two-ray fading model is used for the multi-path fading channel. From the analysis results, it is found that the adjacent subchannel interfernce increases the symbol error rate when the guard interval is not employed or shorter than the length of the delay. It is also shown that the adjacent subchannel interference is a Gaussian random variable and its variance depends on the subchannel location and the number of subchannels. Finally, it is found that the variance of the subchannel interference also increases as the power of the signal increases for the OFDM with insufficient guard interval, yieldin an irreducible error at high signal to noise ratio.

• Journal of Ocean Engineering and Technology
• /
• v.16 no.6
• /
• pp.44-48
• /
• 2002

In lateral ground flow, slope stability, and land slide problems, H-piles have often been used, on a horizontally deforming ground, to prevent the failure of mass of soil in a downward and outward movement of a slope. Here, theoretical equations are derived to estimate the lateral force, assuming that the Mohr-Coulomb's plastic states occur in the ground, just around H-piles. In this study, some model experiments were performed to check the lateral forces determined from theoretical equations, using several pile widths, heights and various interval ratios between H-piles for sand specimens. The solution of the theoretical equation, derived from previous studies, showed reasonable characteristics for constants of soil, as well as for the interval, widths, and heights of H-Pile.

• Journal of the korean Society of Automotive Engineers
• /
• v.10 no.4
• /
• pp.66-74
• /
• 1988

The ignition quality of ignition system is influenced by spark energy, discharge pattern of spark energy and spark duration. In this paper, the characteristics of multiple spark ignition system have been investigated for various number of spark and spark interval. The results, which were compared with those obtained with a standard single spark ignition, show that engine output is increased, and lean misfire limit is extended with the multiple spark ignition system. The most effective number of spark at the most effective spark interval that are determined by engine performance test, were 6 times spark at 0.02ms spark interval. For the above condition of spark, engine torque was increased about 20% comparing with conventional ignition system and lean misfire limit was extended to air-fuel ratio 22.5:1. This study researched the rate of heat release and quantity of heat release influenced by a condition of spark on the mass burned in order to investigate the relationship between the rate of mass burned and number of spark times.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.44 no.2
• /
• pp.310-320
• /
• 2020

This study established a lower garment sizing system for abdominal obesity adult women aged 30-59 based on 277 females selected from the 7th Size Korean Anthropometric survey. The criteria for subjects in this study were over 25 kg/㎡ of the BMI, over 85 cm of waist, and over 0.8 waist hip ratio. The results are as follows. The lower body analysis of abdominal obesity adult women showed that average circumference items were larger than the ordinary size, and the average length items were smaller. The standard deviation was applied around the average values of waist circumference and hip circumference for the suggestion of a lower garment sizing system for abdominal obesity adult women. The interval between the designation was ±1.5 cm with a waist circumference of 100 cm and ±2.5 cm with an average hip circumference of 100 cm. We established 13 designation sections in consideration of the cover ratio and cover efficiency. The cover ratio in the 13 nominal sections was 71.5%. The segmental distribution rate presented in the results will also be useful for production planning in specific sizes that helped enable rational production.

• Journal of Magnetics
• /
• v.22 no.2
• /
• pp.220-226
• /
• 2017

SNR (signal to ratio) is a criterion for providing objective information for evaluating the performance of a magnetic resonance imaging device, and is an important measurement standard for evaluating the quality of MR (Magnetic Resonance) image. The purpose of our study is to evaluate the correct SNR measurement for multi-channel coil and parallel imaging. As a result of research, we found that both T1 and T2 weighted images show the narrowest confidence interval of the method recommended by NEMA (The National Electrical manufacturers Association) 1 having a single measurement method, whereas the ACR (American College of Radiology) measurement method using a multi-channel coil and a parallel imaging technique shows the widest confidence interval. There is a significance in that we quantitatively verified the inaccurate problems of a signal to noise ratio using a ACR measurement method when using a multi-channel coil and a parallel imaging technique of which method does not satisfy the preconditions that researchers could overlook.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.43 no.5
• /
• pp.768-777
• /
• 2019

This study established a lower garment sizing system for elderly men over 65 years of age based on 535 males selected from the 5th Korean Anthropometric survey. The results are as follows. Most elderly men body measurements were smaller for adult males (except for the waist area); however, abdominal obesity has changed to body type. The standard deviation was applied around the average values of waist circumference and hip circumference for the suggestion of a lower garment sizing system for elderly men. The interval between the designation was ${\pm}2.5cm$ with an average waist circumference of 86 cm and ${\pm}2cm$ with an average hip circumference of 92 cm. A total of 13 designation sections were established in consideration of the cover ratio and cover efficiency. The cover ratio in the 13 nominal sections was 77.2%. The segmental distribution rate presented in the results will also be useful for production planning in specific sizes and enable rational production.